云南维西格坡洛斑岩型锑矿矿床成因

锑矿化集中于喜马拉雅期石英斑岩内接触带,存在矿源层形成、充分分异及近地表成矿三个阶段。可作为滇西碱性岩锡矿床典型。     

Anomalous Signals Prior to Wenchuan Earthquake Detected by Superconducting Gravimeter and Broadband Seismometers Records

Using 1 Hz sampling records at one superconducting gravimeter(SG) station and 11 broadband seismometer stations,we found anomalous signals prior to the 2008 Wenchuan(汶川) earthquake event.The tides are removed from the original SG records to obtain the gravity residuals.Applying the Hilbert-Huang transform(HHT) and the wavelet analysis to the SG gravity residuals leads to time-frequency spectra,which suggests that there is an anomalous signal series around 39 h prior to the event.The period and the magnitude...     

Triaxial stress state deep in orogenic belts: an example from Turkey

A rare metachert pebble containing amphibole grains with microboudin structures in a wide range of orientations provides an opportunity to perform stress analysis in two orthogonal orientations on the foliation surface. The sample was analysed by the microboudin method to infer the triaxial stress state during microboudinage. Stress parameters proportional to the far-field differential stress were determined for sodic amphibole grains in the two orientations. The ratio of the stresses in the two orthogonal orientations (σ₁−σ₂)/(σ₁−σ₃) was calculated to be 0.64, indicating that σ₂ lies closer to the midpoint between σ₁ and σ₃ than to σ₃.     

From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy

The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10⁻⁶/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.     

Postcollisional flow of aqueous fluid within ultrahigh-pressure eclogite in the Dabie orogen

A combined study of chronometric dating and oxygen isotope analysis for minerals from vein and host eclogite as well as regional country-rock gneiss in the Dabie orogen provides a direct constraint on timing of fluid flow in this orogen formed by continental collision. Oxygen isotope ratios of vein minerals are significantly lower than those of the host eclogite, but comparable with those of the regional gneiss. This suggests the veining fluid came from the regional gneiss (i.e. exhumed slab itself) rather than the host eclogite. While zircon U–Pb and phengite Ar–Ar dating yields ages of 214 to 222 Ma for the eclogite and gneiss, the vein gives a quartz–muscovite Rb–Sr isochron age of 181 Ma and a muscovite K–Ar age of 179 Ma. Thus the veining postdates the Triassic ultrahigh pressure metamorphic event, witnessing postcollisional fluid flow after the orogenic cycle of continental collision.     

五台地区太白维山大型银矿床水系沉积物综合异常信息的提取

摘 要　 太白维山大型银矿床为典型的中低温火山-潜火山隐爆角砾岩型银矿床。其水系沉积 物异常强度高、面积大、元素套合好‚Ag、Pb、Zn、Mn 等单元素异常中心与矿床的产出部 位一致。利用1∶20万水系沉积物资料‚在各单元素异常成图的基础上筛选出主成矿因子得分 图、相似距离评价法、以及 AgCuPbZnCd／（Cu＋Zn＋Pb）、AgPbZnCd／（AuCuCoNi）等异常综合 指标‚应用到其他银多金属矿化区‚取得了较为理想的效果。     

Radiation-induced defects in quartz. III. Single-crystal EPR,ENDOR and ESEEM study of a peroxy radical

The X- and W-band single-crystal electron paramagnetic resonance spectra of an electron-irradiated natural quartz permit quantitative analysis of a ²⁹Si hyperfine structure (A ~12.6 MHz) and an ²⁷Al hyperfine structure (A ≤ 0.8 MHz) for a previously reported hole-like center. The ²⁹Si hyperfine structure arises from interaction with two equivalent Si atoms and is characterized by the direction of the unique A axis close to a Si–O bond direction. The ²⁷Al hyperfine structure, confirmed by pulsed electron nuclear double resonance and electron spin echo envelope modulation spectra, is characterized by the unique A axis approximately along a twofold symmetry axis. These ²⁹Si and ²⁷Al hyperfine data, together with published theoretical results on peroxy radicals in SiO₂ as well as our own density functional theory (DFT) calculations on model peroxy centers, suggest this hole-like center to have the unpaired spin on a pair of oxygen atoms linked to two symmetrically equivalent Si atoms and a substitutional Al³⁺ ion across the c-axis channel, a first peroxy radical in quartz. The nuclear quadrupole matrix P also suggests that the Al³⁺ ion corresponds closely to the diamagnetic precursor to the [AlO₄]⁰ center. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

http://www.sciencedirect.com/science/article/pii/S1674987114000395

The study of fluid inclusions in high-grade rocks is especially challenging as the host minerals have been normally subjected to deformation, recrystallization and fluid-rock interaction so that primary in- clusions, formed at the peak of metamorphism are rare. The larger part of the fluid inclusions found in metamorphic minerals is typically modified during uplift. These late processes may strongly disguise the characteristics of the ＂original＂ peak metamorphic fluid. A detailed microstructural analysis of the host minerals, notably quartz, is therefore indispensable for a proper interpretation of fluid inclusions. Cathodoluminescence （CL） techniques combined with trace element analysis of quartz （EPMA, LA- [CPMS） have shown to be very helpful in deciphering the rock-fluid evolution. Whereas high-grade metamorphic quartz may have relatively high contents of trace elements like Ti and A1, low- temperature re-equilibrated quartz typically shows reduced trace element concentrations. The result- ing microstructures in CL can be basically distinguished in diffusion patterns （along microfractures and grain boundaries）, and secondary quartz formed by dissolution-reprecipitation. Most of these textures are formed during retrograde fluid-controlled processes between ca. 220 and 500 ℃, i.e. the range of semi-brittle deformation （greenschist-facies） and can be correlated with the fluid inclusions. In this way modified and re-trapped fluids can be identified, even when there are no optical features observed under the microscope.     

钻孔地质雷达工作原理及应用

阐述了钻孔雷达的工作原理,介绍了单孔反射和跨孔层析成像2 种工作方式,并将其用于深部岩层岩性评价和地质异常体探测,效果显着     

Luminescence investigation of loess and tephra from Halfway House section, Central Alaska

Infrared stimulated luminescence (IRSL) properties of the Old Crow tephra and bracketing loess from the Halfway House site in Central Alaska are investigated in order to test newly developed techniques, including SAR and recently proposed fading corrections. Loess samples investigated show a standard growth of luminescence with regenerative dose while the tephra sample is less sensitive by an order of magnitude and saturates at lower dose. The growth curves obtained using multiple-aliquots regeneration (MAR) saturate at a higher value than those with the single-aliquot regeneration (SAR) protocol. Fading rate determinations for these samples are shown to be imprecise and no noticeable difference was observed between loess and tephra materials. Anomalous fading corrections using an average g value of 5% are applied to the natural test dose signal intensity using the dose rate correction (DRC) method. IRSL ages obtained for loess are in agreement with the expected age while the tephra age is lower than expected, suggesting the measured fading rate is underestimated for this material.