Illite/smectite transformation in detrital glaucony during burial diagenesis of sandstone: A study from Siri Canyon – Danish North Sea

Detrital glaucony in the Palaeogene glauconitic sandstones in Siri Canyon, Danish North Sea, has been analysed from 15 exploration wells by X‐ray diffraction, electron microprobe and scanning electron microscopy. These sandstones consist of mixed‐layer illite/smectite and have a large variability in chemical composition and structure. In the most shallow wells (ca 1700 m), the glaucony is rich in Fe and consists of mixed‐layer illite/smectite with random‐interstratification (R = 0). In the depth interval from 1700 to 2000 m, the composition changes as Si is incorporated. The structure changes to ordered R = 1. Further increase in burial leads to the loss of Fe. Ordered R = 3 mixed‐layer illite/smectite is recognized from burial depths of 2200 m. The proportion of illite in illite/smectite mixed layers increases only slightly with depth and temperature. Although the structural changes generally are associated with chemical changes, they can also take place isochemically when the detrital glaucony is tightly embedded in earlier cement, which prevented chemical exchange. The glaucony transformation in the Siri Canyon sandstones partly reflects a supply of Si and partly significant loss of Fe. Thus, the glaucony transformation relates to the general diagenesis of the host sandstone. These sandstones are cemented by microquartz at an early stage, followed by precipitation of Fe‐rich grain‐coating berthierine or chlorite.     

Effects of fault activities on hydrocarbon migration and accumulation in the Zhu I Depression,Pearl River Mouth Basin,South China Sea

Faults can act as either conduits or barriers for hydrocarbon migration, because they have complicated anisotropic flow properties owing to their complicated three-dimensional structures. This study focuses on the Zhu I Depression, Pearl River Mouth Basin (PRMB), China. In this area, hydrocarbon migration and accumulation occurred over a relatively short period of time and were contemporaneous with fault activation, so the characteristics of hydrocarbon accumulations can be used to deduce the effect of active faults on hydrocarbon migration and accumulation. This study addresses the effect of fault activity on flow properties during hydrocarbon migration through a quantitative and comparative analysis of fault activity vs hydrocarbon accumulation. The fault slip rate and shale smear factor parameters were used to characterise faulting and elucidate its effect on hydrocarbon migration and accumulation. Active faults are generally excellent vertical conduits with strong fault activation resulting in vertical migration of most hydrocarbons and little preservation; traps near faults with fault slip rates greater than 20 m/Ma rarely contain commercial oil and gas accumulations. Faulting can form shale smear, which, if continuous, can act as a barrier to hydrocarbon migration. An active fault can allow hydrocarbon transport from deeper formations and to be trapped by continuous shale smear in shallower strata. Most of the oil and gas in the Zhu I Depression have accumulated near faults with a moderate fault slip rate (<20 m/Ma) and development of continuous shale smear (SSF<4–6).     

Applied geophysics for cover thickness mapping in the southern Thomson Orogen

Abstract

Potentially mineralised Paleozoic basement rocks in the southern Thomson Orogen region of southern Queensland and northern New South Wales are covered by varying thicknesses of Mesozoic to Cenozoic sediments. To assess cover thickness and methods for estimating depth to basement, we collected new airborne electromagnetic (AEM), seismic refraction, seismic reflection and audio-frequency magnetotelluric data and combined these with new depth to magnetic basement models from airborne magnetic line data and ground gravity data along selected transects. The results of these investigations over two borehole sites, GSQ Eulo 1 and GSQ Eulo 2, show that cover thickness can be reliably assessed to within the confidence limits of the various techniques, but that caveats exist regarding the application of each of the disciplines. These techniques are part of a rapid-deployment explorers’ toolbox of geophysical techniques that have been tested at two sites in Australia, the Stavely region of western Victoria, and now the southern Thomson Orogen in northern New South Wales and southern Queensland. The results shown here demonstrate that AEM and ground geophysics, and to a lesser extent depth to magnetic source modelling, can produce reliable results when applied to the common exploration problem of determining cover thickness. The results demonstrate that portable seismic systems, designed for geotechnical site investigations, are capable of imaging basement below 300 m of unlithified Eromanga Basin cover as refraction and reflection data. The results of all methods provide much information about the nature of the basement–cover interface and basement at borehole sites in the southern Thomson Orogen, in that the basement is usually weathered, the interface has paleotopography, and it can be recognised by its density, natural gamma, magnetic susceptibility and electrical conductivity contrasts.     

Topographic migration of GPR data: Examples from Chad and Mongolia

Most ground-penetrating radar (GPR) measurements are performed on nearly flat areas. If strongly dipping reflections and/or diffractions are present in the GPR data, a classical migration-processing step is needed in order to determine the geometries of shallow structures. Nevertheless, a standard migration routine is not suitable for GPR data collected on areas showing a variable and large topographic relief. To take into account topographic variations, the GPR data are, in general, corrected by applying static shifts instead of using an appropriate topographic migration that would place the reflectors at their correct locations with the right dip angle. In this article, we present an overview of Kirchhoff's migration and show the importance of topographic migration in the case where the depth of the target structures is of the same order as the relief variations. Examples of synthetic and real GPR data are shown to illustrate the efficiency of the topographic migration.     

利用特色叠前深度偏移技术消除崎岖海底影响——以珠江口盆地番禺—流花地区应用为例

叠前深度偏移技术可有效地进行复杂构造成像,针对不同的地质条件,需要应用不同的处理技术。针对陆架坡折带崎岖海底造成的地震成像差、构造畸变等问题,选择使用了如下叠前深度偏移技术:通过海平面叠前深度偏移技术得到精确的海底成像;通过约束速度反演、加入断层控制建立初始速度模型;采用百分比扫描速度分析对速度模型进行迭代修改,进而快速得到较为收敛的速度体;在此基础上再采用Kirchhoff积分法进行偏移。在珠江口盆地番禺—流花地区应用上述技术,基本消除了崎岖海底对下伏地层的影响,改善了断层和地层成像,并落实了该地区的构造圈闭。     

回填块石土强夯施工工艺的确定及设计优化

以华能莱芜电厂百万机组“上大压小”扩建工程填方区回填块石土强夯地基处理试夯试验为例,比对2个试夯分区采用不同施工工艺施工的质量差别及处理效果,据此查明强夯法的施工质量,确定强夯有效加固深度、土的密实度、变形参数和地基承载力等。根据场地夯填厚度,选取合适的虚填厚度及相应的施工工艺,确定最终施工方案,进一步提高强夯地基处理效果,为最终确定大面积施工所采用的施工工艺提供依据。     

倾斜层位偏移规律研究

层状介质模型是对实际地质情况较为准确的近似。而在实际的数据处理过程中,以等效均匀介质代替层状介质,波传播的几何路径、介质速度的差别会使对倾斜界面位置的判断偏离实际情况。针对设计的理论模型和从测井数据提取的实际介质模型,笔者运用几何射线理论和波场数值模拟技术,定量计算并提取了层状介质模型和等效均匀介质模型两种情况下反射点在时间和空间上的偏移量。结果证明,等效均匀介质模型近似会造成对倾斜界面位置的判断不准确; 准确的速度模型是偏移归位研究的关键,应尽量使用由地震测井资料求得的瞬时速度。     

BCC_CSM对全球海表温度和混合层深度的模拟评估

为了定量评估北京气候中心(BCC)发展的BCC_CSM对当代全球海表温度和混合层深度的模拟能力,以WOA09(World Ocean Atlas 2009)观测资料作为检验模式的气候态实况场,提取包括BCC_CSM在内的CMIP5中的17个海气耦合模式的模拟结果,评估BCC_CSM模拟的全球海表温度和混合层深度的气候平均态并分析造成偏差的可能原因。结果表明:BCC_CSM模拟的海表温度在北半球中高纬的误差较大,而在其余纬度的模拟性能较佳。偏差的产生主要归因于海洋环流偏差。BCC_CSM模拟的最深混合层在北半球中高纬和南半球高纬地区的误差较大,同时这些区域也是多模式模拟差异最大的区域;其模拟的最浅混合层在南半球中高纬的偏差较大。冬季大西洋经向翻转环流的模拟在北大西洋下沉的位置偏南导致北半球高纬地区海表温度偏冷。由此认为包括BCC_CSM在内的许多海气耦合模式需重点改进对南、北半球深对流海域物理过程的描述,以提高气候预测的可信度。     

The ENSO Events in the Tropical Pacific and Dipole Events in the Indian Ocean

A depth map (close to that of the thermocline as defined by 20℃) of climatically maximum seatemperature anomaly was created at the subsurface of the tropical Pacific and Indian Ocean, based on which the evolving sea-temperature anomaly at this depth map from 1960 to 2000 was statistically analyzed. It is noted that the evolving sea temperature anomaly at this depth map can be better analyzed than the evolving sea surface one. For example, during the ENSO event in the tropical Pacific, the seatemperature anomaly signals travel counter-clockwise within the range of 10°S-10°N, and while moving, the signals change in intensity or even type. If Dipole is used in the tropical Indian Ocean for analyzing the depth map of maximum sea-temperature anomaly, the sea-temperature anomalies of the eastern and western Indian Oceans would be negatively correlated in statistical sense (Dipole in real physical sense), which is unlike the sea surface temperature anomaly based analysis which demonstrates that the inter-annual positive and negative changes only occur on the gradients of the western and eastern temperature anomalies. Further analysis shows that the development of ENSO and Dipole has a time lag features statistically, with the sea-temperature anomaly in the eastern equatorial Pacific changing earlier (by three months or so). And the linkage between these two changes is a pair of coupled evolving Walker circulations that move reversely in the equatorial Pacific and Indian Oceans.     

NOAA IMS雪冰产品在青藏高原积雪监测中的适用性分析

在系统评估青藏高原积雪观测典型气象站历史定位坐标精度基础上,利用站点雪深资料对NOAA IMS 4 km和1 km分辨率雪冰产品在青藏高原的精度和适用性进行了验证和评估,定量分析了IMS 4 km到1 km空间分辨率提高和气象站历史定位与GPS定位坐标之间的差异对青藏高原IMS积雪监测精度的影响。结果表明：青藏高原个别气象站历史坐标与当前GPS接收机定位之间存在较大的差异,如安多气象站经度偏小0.6°,纬度偏大0.08°。IMS 4 km雪冰产品在青藏高原的总精度介于76.4%~83.2%,平均为80.1%,积雪分类精度介于35.8%~60.7%,平均为47.2%,平均误判率为17.1%,平均漏判率为45.5%,总体上呈现地面观测的积雪日数越多、平均雪深越大,其总体监测精度越低,而积雪分类精度越高的特点。IMS分辨率从4 km到1 km总体精度平均提高了2.9%,积雪分类精度平均提高了0.9%,主要是由于个别站点的精度提升较大引起的,对高原多数台站积雪监测精度的改进和提升很小。除个别台站外,目前气象站历史坐标和GPS定位坐标之间的差异,对IMS 4 km积雪监测精度验证结果没有影响。然而,今后随着卫星遥感技术的发展,更高时空分辨率的遥感积雪产品将用于积雪监测和研究,精确的地面观测站坐标信息是对这些遥感数据开展精度验证与实际应用的前提。