胶州湾东岸滩涂环境的遥感监测

利用低潮位陆地卫星TM影像对胶州湾东岸碱厂白水分布与扩散进行监测。对研究区的子区影像在ENVI中进行增强、变换处理，提取白水、白泥分布与扩散信息，制作大比例尺影像地图，在GIS软件中计算其面积。结合实地验证和历史数据，分析表明，该污染源10多年来面积扩大了4倍，     

Recorder-Dependent Temperature Error of Expendable Bathythermograph

The accuracy of temperature measurement by the expendable bathythermograph (XBT) is examined for five types of recorders by comparison with co-located CTD measurements and statistical analysis of temperature profiles including an isothermal layer. A positive temperature error increasing downward is occasionally detected for two types of Japanese recorder which have been commonly used among Japanese oceanographic institutions and marine observatories. This error resembles to that reported by Bailey et al. (1989) and Wright (1991) for a different type of recorders, although its cause is not clearly understood. The irregular occurrence of the error suggests that the problem is not solely due to the recorders but rather by some inconsistency of the whole measuring system including them, an XBT probe and sea water. The error is estimated to increase at a rate of O (0.1°C/100 m), and it could be close to 1°C at the deepest part of the profiles (760 m for Tsurumi T-7). This revised version was published online in July 2006 with corrections to the Cover Date.     

利用卫星遥感监测南极海冰的研究和进展

本文是根据南极“八五”国家攻关课题中的“南极海冰监测和预报”的考核目标，实现为南极考察船在 冰区中航行提供精确和清晰的冰图和预报。     

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.     

SeagrassNet monitoring across the Americas: case studies of seagrass decline

Seagrasses are an important coastal habitat worldwide and are indicative of environmental health at the critical land–sea interface. In many parts of the world, seagrasses are not well known, although they provide crucial functions and values to the world's oceans and to human populations dwelling along the coast. Established in 2001, SeagrassNet, a monitoring program for seagrasses worldwide, uses a standardized protocol for detecting change in seagrass habitat to capture both seagrass parameters and environmental variables. SeagrassNet is designed to statistically detect change over a relatively short time frame (1–2 years) through quarterly monitoring of permanent plots. Currently, SeagrassNet operates in 18 countries at 48 sites; at each site, a permanent transect is established and a team of people from the area collects data which is sent to the SeagrassNet database for analysis. We present five case studies based on SeagrassNet data from across the Americas (two sites in the USA, one in Belize, and two in Brazil) which have a common theme of seagrass decline; the study represents a first latitudinal comparison across a hemisphere using a common methodology. In two cases, rapid loss of seagrass was related to eutrophication, in two cases losses related to climate change, and in one case, the loss is attributed to a complex trophic interaction resulting from the presence of a marine protected area. SeagrassNet results provide documentation of seagrass change over time and allow us to make scientifically supported statements about the status of seagrass habitat and the extent of need for management action.     

网箱养鱼诱发有机物污染的生物监测

介绍三种通过底栖动物群落结构的变化对有机物污染监测和评价的方法,并分别对澳大利亚塔斯马尼亚州Nubeena鳟鱼养殖场内由高密度网箱养鱼诱发的有机物污染进行了检测。结果表明:距网箱垂线0m处为严重污染区域,10m处为中度污染区域,30m为过渡类型,其有机物对该处底栖生物仍具有害影响,60m处为轻度有机物富集区,但该处有机物对底栖生物的总效应是有益的,60m以外为正常区域。本文还对三种方法的适用性进行了讨论。     

西太平洋暖池区气象学特征分析

本文根据ＴＯＧＡ－ＣＯＡＲＥ强化观测资料及卫星资料分析讨论了西太平洋暖池区１１－２月间海面气象要素的平均特征。分析发现海面气压平均日变化似乎同中纬度区明显不同。文中还分析讨论了在西太暖池区西风爆发、赤道浅涡、信风逆温及ＩＴＣＥ和南太平洋辐合带ＳＰＣＺ的变化特征。     

Structural monitoring of offshore platforms using impulse and relaxation response

Monitoring offshore platforms, long span bridges, high rise buildings, TV towers and other similar structures is essential for ensuring their safety in service. Continuous monitoring assumes even greater significance in the case of offshore platforms, which are highly susceptible to damage due to the corrosive environment and the continuous action of waves. Also, since a major part of the structure is under water and covered by marine growth, even a trained diver cannot easily detect damage in the structure. In the present work, vibration criterion is adopted for structural monitoring of jacket platforms. Artificial excitation of these structures is not always practicable and ambient excitation due to wind and waves may not be sufficient for collecting the required vibration data. Alternate methods can be adopted for the same purpose, for example, the application of an impact or a sudden relaxation of an applied force for exciting the structure. For jacket platforms, impact can be applied by gently pushing the structure at the fender while relaxation can be accomplished by pulling the structure and then suddenly releasing it using a tug or a supply vessel in both cases. The present study is an experimental investigation on a laboratory model of a jacket platform, for exploring the feasibility of adapting vibration responses due to impulse and relaxation, for structural monitoring. Effects of damage in six members of the platform as well as changes in deck masses were studied. A finite element model of the structure was used to analyze all the cases for comparison of the results as well as system identification. A data acquisition and analysis procedure for obtaining the response signatures of the platform due to the impulse and relaxation procedure was also developed for possible adoption in on-line monitoring of offshore platforms. From the study, it has been concluded that both impulse and relaxation responses are useful tools for monitoring offshore jacket platforms. The present work forms the basis for the development of an automated, on-line monitoring system for offshore platforms, using neural networks.     

Hydrodynamic forces on partly buried tandem, twin pipelines in current

This study extends the investigations of the forces on a cylinder, laid on, or partly buried in the bed with a parallel twin dummy cylinder nearby and without it, and were determined by measuring the pressure distribution on the cylinder in the case of a steady current. The pressure distribution around the cylinder was measured by using pressure transducers. The forces on the cylinder were calculated by the integration of the measured pressures on the surface of the cylinder. Force coefficients were obtained for the ranges of Re=0.8×10⁴–1.5×10⁴ for the burial depth to diameter RATIO=0:0.7. The distance between axis of the measurement and dummy cylinders to diameter ratio (x/D) was 2, 1.5 and 1. The dummy cylinder was replaced downstream and upstream of the measurement cylinder.