长江流域沿江镉异常源追踪与定量评估的方法技术研究:以长江流域安徽段为例

长江全流域性的Cd异常是被中国正在进行的多目标地球化学调查发现的重大生态环境问题。以长江流域安徽段为研究对象,对沿江镉异常源追踪与定量评估的方法技术进行了系统研究。通过对安徽段长江干流及其主要支流悬浮物中元素含量的测量查明:悬浮物是流域内重金属元素大跨度迁移的主要载体;Cd在悬浮物中的富集程度远远大于其他重金属元素,这或许正是Cd可以形成沿江流域性异常的主要原因;长江干流悬浮物中重金属元素含量的变化明显受到沿江支流的影响。安徽段长江干流及其主要支流重金属元素输出通量定量计算结果表明:秋蒲河是安徽段重金属元素输出通量最大的支流,每年在安徽段长江两岸土壤中沉积下约4.45t的Cd。利用悬浮物加密测量、1∶5万土壤测量和岩石测量对顺安河流域Cd异常源追踪结果显示:内生金属矿床特别是铅锌矿是悬浮物中Cd的最大的供应源。采用河漫滩沉积物分层采样技术和同位素测年技术,初步恢复了研究区Cd等重金属元素沉积和污染的地球化学历史,对研究区Cd等重金属元素异常的未来演变趋势进行了预警预测。     

华北地台地热勘探中利用大地电磁测深法(MT)圈定热田范围和探讨地热形成机制

利用大地电磁测深法（MT）反映地质体的电性差异,首先可以确定地质体的空间展布、地质结构和构连;而由于地质体电阻率受地热水影响而降低,进而据此圈定地热水的分布范围;并在此基础上可以进一步探讨地热形成机制。在华北地台地热勘探中MT法取得了较好的勘探效果。     

联合多种测高数据确定中国海及其邻域1．5′×1．5′重力异常

联合多种测高资料和Geosat/GM波形重构数据,基于EIGEN_CG01C重力场模型,采用沿轨迹加权最小二乘方法和逆Vening-Meinesz公式,确定了中国海及其邻域1.5′×1.5′重力异常。将计算结果与最新船测资料进行了比较,标准差为3.37×10-5m.s-2。     

研究“源兆”的若干问题及途径分析

从位场理论的观点讨论了场和源的概念,建议将“场兆”改称为构造前兆,将“源兆”称为震源前兆。文中还分析了震源体与各种前兆观测方法探测的深度,并根据地磁与重力观测方法不同的物理基础和地质基础,指出震磁效应对于研究震源前兆的特殊意义,文中还介绍了１９７６唐山地震观测到震源前兆的部分实际地磁资料。     

云南兰坪-思茅盆地生物地球化学找钾技术方法研究初探

在生物地球化学和“深穿透”理论的指导下,在兰坪-思茅盆地勐野井钾盐矿区及周边开展了生物地球化学找钾技术方法的探索性研究。沿江城县勐野井钾盐矿区及周边一线,对乔木类植物叶子进行了取样,分析,数据处理,特征指标筛选,获得了研究区植物样品主量和微量组分含量背景值,初步圈定了异常区,与以往圈定的找钾远景区较吻合。该区生物地球化学找钾技术取得较好的效果,今后还需扩大采样区域,获得更多样本数据,将找钾特征指标及其异常值的阈值进一步补充完善。     

Increasing critical sensitivity of the Load/Unload Response Ratio before large earthquakes with identified stress accumulation pattern

The Load/Unload Response Ratio (LURR) method is proposed for short-to-intermediate-term earthquake prediction [Yin, X.C., Chen, X.Z., Song, Z.P., Yin, C., 1995. A New Approach to Earthquake Prediction — The Load/Unload Response Ratio (LURR) Theory, Pure Appl. Geophys., 145, 701–715]. This method is based on measuring the ratio between Benioff strains released during the time periods of loading and unloading, corresponding to the Coulomb Failure Stress change induced by Earth tides on optimally oriented faults. According to the method, the LURR time series usually climb to an anomalously high peak prior to occurrence of a large earthquake. Previous studies have indicated that the size of critical seismogenic region selected for LURR measurements has great influence on the evaluation of LURR. In this study, we replace the circular region usually adopted in LURR practice with an area within which the tectonic stress change would mostly affect the Coulomb stress on a potential seismogenic fault of a future event. The Coulomb stress change before a hypothetical earthquake is calculated based on a simple back-slip dislocation model of the event. This new algorithm, by combining the LURR method with our choice of identified area with increased Coulomb stress, is devised to improve the sensitivity of LURR to measure criticality of stress accumulation before a large earthquake. Retrospective tests of this algorithm on four large earthquakes occurred in California over the last two decades show remarkable enhancement of the LURR precursory anomalies. For some strong events of lesser magnitudes occurred in the same neighborhoods and during the same time periods, significant anomalies are found if circular areas are used, and are not found if increased Coulomb stress areas are used for LURR data selection. The unique feature of this algorithm may provide stronger constraints on forecasts of the size and location of future large events.     

A laboratory experiment to monitor the contact state of a fault by transmission waves

We performed a series of laboratory experiments in which elastic waves were transmitted across a simulated fault. Two types of experiments were carried out: (1) Normal Stress Holding Test (NSHT): normal stress was kept constant for about 3 h without shear stress and transmission waves were observed. (2) Shear Stress Increasing Test (SSIT): shear stress was gradually increased until a stick-slip event occurred. Transmission waves were continuously observed throughout the process of stress accumulation. We focused on the change in transmission waves during the application of shear stress and especially during precursory slips.It was found in NSHT that the amplitude of transmission waves linearly increased with the logarithm of stationary contact time. The increase amounted to a few percent after about 3 h. Creep at asperity contacts is responsible for this phenomenon. From a theoretical consideration, it was concluded that the real contact area increased with the logarithm of stationary contact time.We observed in SSIT a significant increase in wave amplitude with shear stress application. This phenomenon cannot be attributed to the time effect observed in NSHT. Instead, it can be explained by the mechanism of “junction growth” proposed by Tabor. Junction growth yields an increase in real contact area. It is required for junction growth to occur that the material in contact is already plastic under a purely normal loading condition. A computer simulation confirmed that this requirement was satisfied in our experiments. We also found that the rate at which the amplitude increased was slightly reduced prior to a stick-slip event. The onset time of the reduction well coincides with the onset of precursory slip. The cause of the reduction is attributed to the reset of stationary contact time due to displacement. This interpretation is supported by the result of NSHT. Taking the time of stationary contact in SSIT into account, we may expect the change in wave amplitude to be, at most, only a few percent. The observed slight reduction in increasing rate is, in this sense, reasonable. The static stiffness of the fault also decreases with precursory slip. It was also found that low frequency waves are a better indicator of precursory slip than high frequency waves. This might suggest that low frequency waves with longer wavelength are a better indicator of average behavior of faults. The problem, however, merits a further investigation. The shifts in phase were also found to be a good indicator of the change in contact state of the fault. The changes in both amplitude and phase of transmission waves are unifyingly understood through the theory of transmission coefficient presented by Pyrak-Nolte et al. Rough surfaces have a tendency to give larger stick-slips than smooth surfaces. The amount of precursory slip is larger for rough surfaces than for smooth surfaces. Although it was confirmed by a computer simulation that rough surfaces have larger contact diameters than smooth surfaces, the rigorous relationship between the surface roughness (contact diameter) and the amount of precursory slips was not established.     

GPS高程拟合的方式及可靠性分析

在范围不大的区域中，高程异常具有一定的几何相关性，GPS高程拟合就是利用这一原理，求解正常高。在解析法求解过程中，首先用最小二乘法确定拟合数学模型的系数，在此基础上计算出待测点的高程异常值。通过实例验证：GPS高程拟合的精度主要取决于GPS大地高的精度、重合点正常高的精度、重合点的分布及拟模型的选择。一般在重合点数量充足且分布均匀的情况下，GPS高程拟合的精度可达到四等水准网的精度要求。     

航磁异常的几种计算机分类方法

目前,应用计算机对航磁异常进行分类存在很大局限性。为克服这些局限性,将航磁异常分类的结果从定性水平提升到定量水平,这里应用三种分类方法在计算机上对航磁异常进行分类。经实例检验,分类结果令人满意,有效地改进和实现了用于航磁异常分类的定量方法。