Hydrothermal Mineralization on the Mesoproterozoic Passive Continental Margins of China： A Case Study of the Langshan-Zha＇ertaishan Belt, Inner Mongolia, China

Most ore-forming characteristics of the Langshan-Zha‘ertaishan hydrothermal exhalation belt, which consists of the Dongshengmiao, Huogeqi, Tanyaokou and Jiashengpan large-superlarge Zn-Pb-Cu-Fe sulfide deposits, are most similar to those of Mesoproterozoic SEDEX-type provinces of the world. The characteristics include: (1) All deposits of this type in the belt occur in third-order fault-basins in the Langshan-Zha‘ertaishan aulacogen along the northern margin of the North China Platform; (2) these deposits with all their orebodies hosted in the Mesoproterozoic impure dolomite-marble and carbonaceous phyllite (or schists) have an apparent stratabound nature; ores display laminated and banded structures, showing clear depositional features; (3) there is some evidence of syn-sedimentary faulting, which to a certain extent accounts for the temporal and spatial distribution and the size of the orebodies in all deposits and the formation of intrabed conglomerates and breccias; (4) they show lateral and vertical zonation of sulfides; (5) The Cu/(Pb Zn Cu) ratio of the large and thick Pb Zn Cu orebodies gradually decreases from bottom to top; and (6) barite is interbedded with pyrites and sometimes with sphalerite. However, some characteristics such as the Co/Ni radio of the pyrites, the volcanism, for example, of the Langshan-Zha‘ertalshan metallogenic belt, are different from those of the typical SEDEX deposits of the world. The meta-basic volcanic rock in Huogeqi, the sodic bimodal volcanic rocks in the Dongshengmiao and potassic bimodal-volcanic rocks with blastoporphyfitic and blasto-glomeroporphyritic texture as well as blasto-amygdaloidal structure in the Tanyaokou deposits have been discovered in the only ore-bearing second formation of the Langshan Group in the past 10 years. The metallogeny of some deposits hosted in the Langshan Group is closely related to syn-sedimentary volcanism based on the following facts: most of the lead isotopes in sphalerite, galena, pyrite, pyrrhotite and chalcopyrite plot on both sides of the line for the mantle or between the lines for the mantle and lower crust in the lead isotope composition diagram; cobalt content of some pyrites samples is much higher than the nickel content (Co/Ni= 11.91-12.19). Some volcanic blocks and debris have been picked out from some pyritic and pyrrhotitic ores. All Zn-Pb-Cu-Fe sulfide orebodies in these deposits occur in the strata overlying metamorphic volcanic rocks in the only ore-bearing second formation. In the Jiashengpan deposit that lacks syn-sedimentary volcanic rocks in the host succession only Pb and Zn ores occur without Cu ore, but in the Dongshengmiao, Tanyaokou and Huogeqi deposits with syn-sedimentary volcanic rocks in the host succession Cu ores occur. This indicates a relatively higher ore-forming temperature. The process of synsedimentary volcanic eruption directly supplied some ore-forming elements, and resulted in secular geothermal anomaly favorable for the circulation of a submarine convective hydrothermal system, which accounts for the precipitation of deep mineralizing fluids exhaling into anoxidic basins along the syn-sedimentary fault system in the Langshan-Zha‘ertai rift. The Dongshengmiao, Tanyaokou, and Huogeqi deposits hosted in the Langshan Group appear to be a transitional type of mineral deposit between SEDEX and VMS-types but with a bias towards SEDEX, while the Jiashengpan deposit hosted in the Zha‘ertai Group is of a characteristic SEDEX type. This evidence, together with other new discoveries of Mesoproterozoic volcanic rocks and the features of lithogeny and metallogeny of the Bayun Obo deposit in the neighborhood emphasize the diversity, complexity and uniqueness of the Mesoproterozoic Langshan-Zha‘ertal-Bayun Obo ore belt.     

The Significance of Multiple Saturation Points in the Context of Polybaric Near-fractional Melting

Experimental petrologists have successfully located basalticliquid compositions parental to mid-ocean ridge basalt thatare, within experimental resolution, multiply saturated withthree-phase harzburgite or four-phase lherzolite assemblageson their liquidus at some elevated pressure. Such an experimentalresult is a necessary consequence of any paradigm in which eruptedbasalts derive from single-batch primary liquids that equilibratewith a mantle residue and undergo no subsequent magma mixingbefore differentiation and eruption. Here we investigate whether,conversely, such evidence of multiple saturation is sufficientto exclude dynamic melting models wherein increments of meltare mixed after segregation from residues, during melt transportor in magma chambers. Using two independent models of crystal–liquidequilibria to simulate polybaric near-fractional peridotitemelting, we find that aggregate liquids from such melting processescan display near-intersections of liquidus surfaces too closeto distinguish experimentally from exact multiple saturationpoints. Given uncertainties in glass compositions, fractionationcorrections, experimental temperature and pressure conditions,and achievement of equilibrium, these results suggest that polybaricmixtures can in fact masquerade as mantle-equilibrated single-batchprimary liquids. Multiple saturation points on the liquidussurfaces of primitive basalts do, however, preserve informationabout the average pressure of extraction of their constituentincrements of liquid. KEY WORDS: mantle melting; basaltic volcanism; experimental igneous petrology; thermodynamic modelling; inverse method     

Petrogenesis of Tertiary Continental Intra-plate Lavas from the Westerwald Region, Germany

Tertiary volcanic rocks from the Westerwald region range frombasanites and alkali basalts to trachytes, whereas lavas fromthe margin of the Vogelsberg volcanic field consist of morealkaline basanites and alkali basalts. Heavy rare earth elementfractionation indicates that the primitive Westerwald magmasprobably represent melts of garnet peridotite. The Vogelsbergmelts formed in the spinel–garnet peridotite transitionregion with residual amphibole for some magmas suggesting meltingof relatively cold mantle. Assimilation of lower-crustal rocksand fractional crystallization altered the composition of lavasfrom the Westerwald and Vogelsberg region significantly. Thecontaminating lower crust beneath the Rhenish Massif has a differentisotopic composition from the lower continental crust beneaththe Hessian Depression and Vogelsberg, implying a compositionalboundary between the two crustal domains. The mantle sourceof the lavas from the Rhenish Massif has higher ²⁰⁶Pb/²⁰⁴Pband ⁸⁷Sr/⁸⁶Sr than the mantle source beneath the Vogelsbergand Hessian Depression. The 30–20 Ma volcanism of theWesterwald apparently had the same mantle source as the QuaternaryEifel lavas, suggesting that the magmas probably formed in apulsing mantle plume with a maximum excess temperature of 100°Cbeneath the Rhenish Massif. The relatively shallow melting ofamphibole-bearing peridotite beneath the Vogelsberg and HessianDepression may indicate an origin from a metasomatized portionof the thermal boundary layer. KEY WORDS: continental rift volcanism; basanites; trachytes; assimilation; fractional crystallization; partial melting     

Hydrothermal alteration and tectonic evolution of an intermediate- to fast-spreading back-arc oceanic crust: Late Ordovician Solund-Stavfjord ophiolite, western Norway

Abstract The Solund‐Stavfjord ophiolite complex (SSOC) in western Norway represents a remnant of the Late Ordovician oceanic lithosphere, which developed in an intermediate‐ to fast‐spreading Caledonian back‐arc basin. The internal architecture and magmatic features of its crustal component suggest that the SSOC has a complex, multistage sea floor spreading history in a supra‐subduction zone environment. The youngest crustal section associated with the propagating rift tectonics consists of a relatively complete ophiolite pseudostratigraphy, including basaltic volcanic rocks, a transition zone between the sheeted dyke complex and the extrusive sequence, sheeted dykes, and high‐level isotropic gabbros. Large‐scale variations in major and trace element distributions indicate significant remobilization far beyond that which would result from magmatic processes, as a result of the hydrothermal alteration of crustal rocks. Whereas K₂O is strongly enriched in volcanic rocks of the extrusive sequence, Cu and Zn show the largest enrichment in the dyke complex near the dyke–volcanic transition zone or within this transition zone. The δ¹⁸O values of the whole‐rock samples show a general depletion structurally downwards in the ophiolite, with the largest and smallest variations observed in volcanic rocks and the transition zone, respectively. δ¹⁸O values of epidote–quartz mineral pairs indicate 260–290°C for volcanic rocks, 420°C for the transition zone, 280–345°C for the sheeted dyke complex and 290–475°C for the gabbros. The ⁸⁷Sr/⁸⁶Sr isotope ratios show the widest range and highest values in the extrusive rocks (0.70316–0.70495), and generally the lowest values and the narrowest range in the sheeted dyke complex (0.70338–0.70377). The minimum water/rock ratios calculated show the largest variations in volcanic rocks and gabbros (approximately 0–14), and generally the lowest values and range in the sheeted dyke complex (approximately 1–3). The δD values of epidote (?1 to ?12‰), together with the δ¹⁸O calculated for Ordovician seawater, are similar to those of present‐day seawater. Volcanic rocks experienced both cold and warm water circulation, resulting in the observed K₂O‐enrichment and the largest scatter in the δ¹⁸O values. As a result of metal leaching in the hot reaction zone above a magma chamber, Zn is strongly depleted in the gabbros but enriched in the sheeted dyke complex because of precipitation from upwelling of discharged hydrothermal fluids. The present study demonstrates that the near intact effect of ocean floor hydrothermal activity is preserved in the upper part of the SSOC crust, despite the influence of regional lower greenschist facies metamorphism.     

Deep Mechanical Background for the Cenozoic Volcanism in the Tibetan Plateau

INTRODUCTION Volcanoesaremostlyobservedinoceanicridges,hotspotsandcontinentalriftzones(Hongetal.,2003),andarerarelyobservedincontinentalinteri ors.However,sincethevolcanoeswithintheconti nentinteriorscannotbeattributedtotheplate/block marginprocess,theydr…     

The Early Cretaceous Jacuí Group,a newly discovered volcaniclastic–epiclastic accumulation at the top of the Paraná Basin,southern Brazil

The presence of volcaniclastic rocks related to the silicic magmatism within the Serra Geral Formation has been a matter of long-standing debate. In this paper, we present extensive documentation that supports the presence and abundance of these rocks in the Jacuí Group, a newly discovered volcaniclastic and epiclastic accumulation in southern Brazil. The Jacuí Group is composed of two interfingered stratigraphic units, the Volta Alegre and Tupanciretã formations, and it represents the uppermost stratigraphic unit of the Paraná Basin. The Volta Alegre Formation is primarily composed of resedimented volcaniclastic tuffites, the pyroclasts which were sourced from the Santa Maria subgroup of the Palmas-type of the Serra Geral Formation. The Tupanciretã Formation is composed of fluvial and aeolian deposits transported towards the north–northwest. Deposition of the Jacuí Group began in the Early Cretaceous (∼132 Ma) and was coeval with the acidic volcanism of the Santa Maria subgroup. This group was deposited in a probable interior sag basin that represents either the beginning of the extension in the inner part of the continent that subsequently migrated to the east or the far-field impact of extensional processes that preceded the break-up of Gondwana and the opening of the South Atlantic Ocean.     

Volcanological study of the middle Miocene Okiduse Volcanic Group,Woodlark Island (Muyuw), eastern Papua

Woodlark Island (Muyuw) is located in a tectonically complex region, one of the few places on Earth where continental breakup is occurring ahead of seafloor spreading. Rifting commenced in the late Miocene (8.8–6 Ma) and is associated with the westward-propagating Woodlark Basin Spreading Centre. The island comprises approximately 850 km² of raised Pleistocene coral reef and associated sediments with a central, moderately elevated range underlain by the middle Miocene calc-alkaline to shoshonitic Okiduse Volcanic Group (new name). It provides an exposure of upper Cenozoic geology in close proximity to the spreading centre. The Okiduse Volcanic Group is host to most of the island's historical gold and silver production and recently defined mineral resources totalling 1.75 Moz gold. This study uses facies analysis of pyroclastic deposits to develop a detailed geological map of the Okiduse Volcanic Group, with a revision and reinterpretation of the unit. Facies associations suggest that two major volcanic centres erupted synchronously during the middle Miocene (14–12 Ma), referred to as the Watou Mountain Eruptive Centre (new name) and the Uvarakoi Caldera (new name). The mafic–intermediate Watou Mountain Eruptive Centre formed during frequent small eruptions of widely varying style. Strombolian, subplinian, vulcanian and dome-related explosive eruptions occurred, alternating with extrusion of block and ash flow deposits and lava domes. Pyroclastic deposits were rapidly reworked from the steep cone, and were redeposited in a series of coalescing aprons surrounding the volcano. The felsic Uvarakoi Caldera formed during a series of violent explosive eruptions by rapid removal of magma from the underlying chamber, followed by collapse. Plinian and possibly phreatoplinian eruptions, as a result of magma–water mixing in the surface environment, resulted in widely dispersed, highly fragmented tuff deposits. The caldera was modified by widespread erosion following eruptions, resulting in fluvial, laharic and slope-wash deposits. This study highlights lithological controls (porosity and permeability) by various units within the Okiduse Volcanic Group on ore deposition.     

Geological development of Heard Island,Central Kerguelen Plateau

We report ⁴⁰Ar–³⁹Ar laser step-heating age determinations on 15 stratigraphically controlled lava flows and intrusive rocks from Heard Island, Central Kerguelen Plateau (Indian Ocean). The island history began with uplift of pelagic limestone intruded by 22 Ma gabbro sills. Subaerial and wave erosion levelled the early island, producing an unconformity onto which pillow lavas, tuffaceous sediments and shallow-water, fossiliferous marine siltstone (Drygalski Formation) were deposited, beginning in late Miocene time. Two volcanic systems then formed in the late Quaternary. Big Ben dominates the larger southeast part of the island, while Mount Dixon occupies the northwest Laurens Peninsula. Feeder dykes and the early lava flows in both systems are 400–200 ka. Lava flows with evolved compositions (trachytes, trachyandesites) erupted 100–20 ka. Well-preserved parasitic cones exposed at low elevations are 15–10 ka and younger. Mawson Peak, near the summit of Big Ben, has erupted lava flows as recently as 2007. Heard Island, and nearby active McDonald Island, are subaerial features of a larger Neogene volcanic region of Central Kerguelen Plateau that includes several large sea knolls and recently identified submarine fields of small cones. This broadly distributed volcanic activity is linked to incubation of plume material at the base of the nearly stationary overlying Central Kerguelen Plateau.     

Variable complexity of the US Continental Divide trace

Abstract

Map-view complexity of 65 contiguous segments of the conterminous US Continental Divide trace was evaluated by the divider method, with each segment’s geometry approximated by a fractal dimension (D) value, or two D values applying to fine and coarse scales of inspection. Results support a generalization that D values in the range 1.05–1.12 are typical for drainage divides viewed at regional to national scales. However about 20% of cases reviewed in this study are smoother (D = 1.01–1.04) or more complex (D = 1.13–1.18) traces. Complexities of these watershed boundary segments show no significant correlation with physiographic province or local relief. The primary influence of bedrock lithology and surface process is seen in zones of Quaternary volcanism, where uncommonly smooth and highly complex divide trace segments are more the rule than exception. Uncommonly smooth divide traces are also found descending mountain pediments in areas of parallel drainage, and some of the most tortuous traces are associated with drainage patterns disrupted by non-fluvial processes. Divide trace segments crossing terrain with uniform lithology show decreased complexity, but traces with the broadest range of complexity, including highest D values, occur in areas with moderate, not extreme, degrees of bedrock diversity.