导管架式海上风力发电支撑结构振型扩阶方法

提出1种适用于海上风力发电支撑结构的模态振型扩阶方法。该方法无需借助转换矩阵实现振型扩阶,而是依靠实测模态并通过修正有限元模型对应振型在未测试自由度的振型值而获得空间完备的模态振型,并且所发展的方法在一定程度上可以忽略有限元模型存在的建模误差,是1种直接的估算方法,计算效率相对较高。文中采用三桩导管架式海上风力发电支撑结构验证提出方法的正确性以及在低阶模态振型扩阶上的优越性。数值结果表明,该方法对传感器位置、数量依赖程度低,尤其对于海上风电结构,仅在结构的水深较浅部位布置少数传感器即可比较精确的实现低阶模态振型扩阶,具有良好的工程应用前景。     

The role of diagenesis and depositional facies on pore system evolution in a Triassic outcrop analogue (SE Spain)

This study aims at unravelling the diagenetic history and its effect on the pore system evolution of the Triassic redbeds exposed in SE Spain (TIBEM¹), an outcrop analogue of the TAGI (Trias Argilo-Gréseux Inférieur) reservoir (Berkine-Ghadames Basin, Algeria). Similar climatic, base level and tectonic conditions of aforementioned alluvial formations developed analogue fluvial facies stacking patterns. Furthermore, interplay of similar detrital composition and depositional facies in both formations resulted in analogue early diagenetic features. Petrographic observations indicate lithic subarkosic (floodplain facies) and subarkosic (braidplain facies) compositions which are considered suitable frameworks for potential reservoir rocks. Primary porosity is mainly reduced during early diagenesis through moderate mechanical compaction and formation of K-feldspar overgrowth, gypsum, dolomite and phyllosilicate cements. Early mesodiagenesis is testified by low chemical compaction and quartz cementation. Telodiagenetic calcite filling fractures and K-feldspar dissolution determined the final configuration of analysed sandstones. Mercury injection-capillary pressure technique reveals overbank deposits in the floodplain as the least suitable potential reservoirs because of their lowest open porosity (OP < 16%), permeability (k < 5 mD) and small dimensions. On the other hand, braidplain deposits show the highest values of such properties (OP up to 31.6% and k > 95 mD) and greater thickness and lateral continuity, so being considered the best potential reservoir. The accurate estimation of TIBEM microscale attributes can provide important input for appraisal and enhanced oil recovery performance in TAGI and in others reservoirs consisting on similar fluvial sandy facies.     

Experimental evaluation of reservoir quality in Mesozoic formations of the Perth Basin (Western Australia) by using a laboratory low field Nuclear Magnetic Resonance

Accurate porosity and permeability evaluation of rock formations is critical to estimate the quality and resource potential of a reservoir. In addition to directly measure the porosity and pore size distribution, low field Nuclear Magnetic Resonance (NMR) is able to measure the effective porosity and estimate the in-situ formation permeability, though its robustness is arguable and requires calibrations on cores with specific lithologies.The Mesozoic formations of the central Perth Basin (Western Australia) host hot sedimentary aquifers and recently became key targets for geothermal heat extraction. A collection of cores was retrieved from three wells intersecting these units. The characterisation of their flow properties complements the current evaluation of the Perth Basin by adding new data on effective porosity, pore size distribution, pore geometry and calibration of predictive models for the permeability according to a comprehensive facies classification scheme.This study highlights the consistency of the NMR approach when compared to conventional helium injection method. Most favourable lithologies for well production correspond to very coarse to fine sandstones of fluvial channel fill with porosities >15% and permeabilities >>1 mD. Similarly, these facies exhibit (i) the highest effective porosities, (ii) the highest pore space to pore throat ratio, and (iii) the lowest contribution of clay bound water. These aspects confirm the importance of clay occurrence in the assessment of the flow efficiency of a formation.The Yarragadee Formation presents the best reservoir quality regarding its porosity and permeability, even though high discrepancies occur locally owing to the great variability of lithofacies encountered. The scattered values observed for the Lesueur Sandstone are likely to be due to the basin architecture and fault system which generate different mechanical compaction and secondary cementation. Given an adequate facies analysis, the NMR method represents a powerful tool to estimate the flow efficiency of a reservoir.     

Deriving airborne laser scanning based computational canopy volume for forest biomass and allometry studies

A computational canopy volume (CCV) based on airborne laser scanning (ALS) data is proposed to improve predictions of forest biomass and other related attributes like stem volume and basal area. An approach to derive the CCV based on computational geometry, topological connectivity and numerical optimization was tested with sparse-density, plot-level ALS data acquired from 40 field sample plots of 500–1000 m² located in a boreal forest in Norway. The CCV had a high correspondence with the biomass attributes considered when derived from optimized filtrations, i.e. ordered sets of simplices belonging to the triangulations based on the point data. Coefficients of determination (R²) between the CCV and total above-ground biomass, canopy biomass, stem volume, and basal area were 0.88–0.89, 0.89, 0.83–0.97, and 0.88–0.92, respectively, depending on the applied filtration. The magnitude of the required filtration was found to increase according to an increasing basal area, which indicated a possibility to predict this magnitude by means of ALS-based height and density metrics. A simple prediction model provided CCVs which had R² of 0.77–0.90 with the aforementioned forest attributes. The derived CCVs always produced complementary information and were mainly able to improve the predictions of forest biomass relative to models based on the height and density metrics, yet only by 0–1.9 percentage points in terms of relative root mean squared error. Possibilities to improve the CCVs by a further analysis of topological persistence are discussed.     

扬州市江都区地热资源前景分析

江都区位于宁通隆起与苏北坳陷接合部,具有良好的地热地质开发利用前景。地热资源主要为传导型,分为孔隙型和岩溶裂隙型2个地热系统。根据地热地质条件分为北部、中部及南部3个地热资源分区。北部以孔隙型为主,中部、南部以构造裂隙型为主。预测可采地热水资源总量约11.18万m3/d,地热水温度40～68℃。     

Pore orientation of granular materials during biaxial compression

The local pore spaces in granular materials tend to be aligned parallel to the major principal stress direction upon particle mobilization. Manifestation of this response has been numerically validated in our previous studies with the aid of discrete element method modeling and image processing techniques during creep and shearing. We now extend the modeling of pore geometry, constructed with spherical particles, to assemblies of particle clumps. Two-dimensional simulations are performed for both loose and dense assemblies of spherical particles and particle clumps. Each particle packing is bound by rigid or flexible walls and subjected to biaxial compression and the particle mobilization effect on the evolution of pore orientation is explored. Randomly shaped pores surrounded by adjacent particles are geometrically quantified by Delaunay tessellation and fitted with ellipses. Results show that localization is apparent in dense assemblies, in particular for clumped particle packing, while loose assemblies exhibit diffusive failure. Small pores within well-defined shear bands tend to align either parallel to the direction of the shear band or perpendicular to the major principal stress. On the other hand, small pores within the blocks and large pores have a tendency to become elongate towards the major principal stress direction. This study reveals for the first time that pore orientation is dependent upon particle shape, pore size, and assembly conditions on the pore and global scales.     

Design of drainage blankets for leachate recirculation in bioreactor landfills using two-phase flow modeling

Drainage blankets (DB) are used for leachate recirculation in bioreactor landfills and consist of highly permeable material placed over a large area of the landfill with the leachate injection pipe embedded in the material at specified locations. DBs are generally installed at different depth levels during the waste filling operations. Very limited information is reported on performance of DBs, and that which exists is based on a small number of field monitoring and modeling studies. A rational method for the design of landfills using DBs has not been developed. This study performs a parametric analysis based on a validated two-phase flow model and presents design charts to guide the design of DBs for given hydraulic properties of MSW, the leachate injection rate and the dimensions and locations of the DB as measured from the leachate collection and recirculation system (LCRS) located at the bottom of the landfill cell. Numerical simulations were performed for the two established MSW conditions: homogeneous–isotropic and heterogeneous–anisotropic waste. The optimal levels of leachate saturation, wetted width, wetted area and developed pore water and pore gas pressures were determined, and design charts using the normalized parameters were developed. An example is presented on the use of design charts for typical field application.     

庐枞盆地泥河铁矿床成矿岩体三维形态学分析及找矿指标研究

泥河铁矿床位于长江中下游成矿带内庐枞盆地的西北部,属玢岩型铁矿床,前人对该矿床的基础地质研究已有一定成果,积累了大量的数据资料,表明泥河铁矿床的形成与辉石闪长玢岩顶面形态关系密切。本文选择泥河铁矿床闪长玢岩为研究对象,以钻孔资料为依据,采用离散光滑插值法建立成矿岩体的精细三维模型,重现了闪长玢岩体的形态特征,将三维模型离散化后提取岩体顶面并通过三维形态分析方法进行数值分析,提取了岩体表面的隆起、凹陷形态,并与已知矿体进行对比,验证了该矿床成矿岩体隆起形态与矿体位置的对应关系。本文通过多次实验确定最佳表达的滑动窗口尺寸和与成矿岩体形态有关的找矿指标,结果证明利用10×10个单元的滑动窗口可以识别80%以上矿体。本文对三维成矿预测中三维空间分析方法进行探索,证明成矿岩体三维形态分析方法的有效性,这一方法可直接应用于与泥河铁矿床类似的玢岩型铁矿床三维成矿预测中。     

面向道路网络地图示意化的线形简化方法

针对当前示意网络地图线形状简化方法中存在需要人工干预或地图认知度低的问题,本文提出自动化程度高并能保证良好地图认知的线形状简化方法.该方法通过合理设定线形状简化中所需的阈值以避免人工干预,提高了线形状简化过程的自动化程度,并通过在简化过程中应用平滑算法,以减少示意结果中线对象在方向上的转折数,从而提高了简化度和清晰度.试验表明该方法不仅可以生成清晰的示意结果,并且能够保证良好的地图认知度.     

星康吉鳗精子的超微结构研究

为探讨星康吉鳗(Conger myriaster)精子的超微结构和形态,应用扫描电镜和透射电镜对星康吉鳗精子结构进行观察。结果表明,精子由头部、中段和鞭毛3部分组成,有其独特的结构,总长度为35.75± 1.15µm。精子头部为新月形,主要由细胞核构成,细胞核内有核泡,无顶体结构。精子头部的质膜内包含单一的线粒体。精子头部长为3.33±0.16 um,头宽为1.12±0.13 um。在精子头部的凸面上,有4条从中段到头端的条纹。精子中段伸出一支根,支根位于精子的中段末端。精子中段长度为0.55±0.05 um,支根长度为1.38±0.08 um、直径为90.48±6.06 nm。精子尾部鞭毛细长,鞭毛横切面呈圆形,无侧鳍,鞭毛的轴丝结构为“9+0”型;一些鞭毛的末端呈现卷曲状,发育机制尚不明确。精子鞭毛长为31.16±1.51µm,鞭毛直径为0.17±0.01µm。通过比较分析发现精子的这些形态学特征不仅表现在星康吉鳗精子,还表现在鳗鲡目其他属的精子;表明是鳗鲡目精子的共同特征。本研究揭示了星康吉鳗精子的形态结构,为突破星康吉鳗人工繁殖技术提供了理论参考。