人工植被和流动沙丘近地面层湍流通量的计算

提出了由Ｂｕｓｉｎｇｅｒ建议的无量纲廓线通用函数形式的近地面层稳定度参数ζ的相似方程分析解。代替了以往采用数值迭代法求ζ，并应用于沙漠人工植被和裸露流动沙丘上的实例资料分析。采用目前广泛应用的空气动力学方法，分别计算了动量和热量交换系数，感热和潜热通量，并由波文比－能量平衡方法进行了验证。结果表明：采用Ｂｕｓｉｎｇｅｒ无量纲通量廓线关系形式的近地面层稳定度参数ζ的相似方程分析解，代替以往惯用的数值     

Physical,radiative, and dynamical processes within a nighttime marine stratus cloud

Observations taken by aircraft and conventional platforms are used to investigate dynamical, physical, and radiative processes within a marine stratus cloud during the Canadian Atlantic Storms Program (CASP) II field project which took place over the east coast of Canada. Stratus which formed over the ocean on February 6, 1992 during the nighttime, is studied to analyze cloud top and base processes. The cloud was supercooled during the study period. Fluctuations and fluxes are calculated along constant flight altitude legs approximately 100 km long in space. The scales of structures larger than 5 km are removed from the analysis using a running average technique. Droplet spectra obtained by a forward scattering spectrometer probe (FSSP) were used in a 1-D radiative transfer model to calculate infrared (IR) fluxes and radiative heating rates. A heat conservation equation was used to estimate vertical air velocity (w _a ) within the cloud. The results showed that, because of a warmer ocean surface, significant moisture and heat were transferred from the ocean surface to the boundary layer. The cloud base was at about 400 m height and the top was at about 1.4 km.w _a at the cloud base was estimated about 5 cm s^–1. Strong IR cooling rate at the cloud top was calculated to be 75°C day^–1 for a 100 m thick layer. Negative skewness inw _a , suggesting narrow downdrafts, was likely due to radiative cooling at the cloud top. The entrainment velocity was found to be about 1.5 cm s^–1 at cloud top. Mean moisture and heat fluxes within the cloud were estimated to be comparable to those from the ocean surface. Vertical air velocity at the cloud top due to radiative cooling was found to be about –40 cm s^–1.     

Simulation of Atmospheric Boundary Layer Characteristics during Indian Summer Monsoon using Observations from Monsoon Trough Boundary Layer Experiment at Jodhpur, India

The diurnal structure of the boundary layer during Indian summer monsoon period is studied using a one-dimensional meteorological boundary layer model and the observations collected from the Monsoon Trough Boundary Layer Experiment conducted in 1990 at Jodhpur, India. The model was initialized with the observed temperature profiles at 0530 LST on 17 July, 1990 at Jodhpur and was run for 26 hours. The study is carried out with a geostrophic wind speed of 9.5 m s⁻¹ corresponding to the strong wind simulation. The mean thermodynamic and wind structure simulated by the model are in good agreement with those observed from 30 m tower. The computed surface layer characteristics such as the surface fluxes, TKE and standard deviations of velocity components are found to be reasonably in good agreement with those based on turbulence measurements. The shear and buoyancy budget computed from the model are also compared with the turbulence measurements. The integrated cooling budget in the nocturnal boundary layer is examined.     

The impact of hurricanes on sedimenting particulate matter in the semi-arid Bahía de La Paz,Gulf of California

From 2002 through 2004, time-series sediment trap samples were collected from a depth of 410 m in Cuenca Alfonso, Bahía de La Paz, on the SW coast of the Gulf of California. The instrument recorded the impact of the local passage of hurricanes “Ignacio” (24–26 August) and “Marty” (21–23 September) in 2003. These two events accounted for 82% of the total rainfall measured in 2003, equivalent to the annual average precipitation in years without hurricanes. Mean total mass fluxes (TMFs) of 2.88 and 3.58 g m⁻² d⁻¹ were measured during the week of each hurricane as well as the following week. This may have been enough to produce a lamina in the underlying sediment with characteristics peculiar to such events. The terrigenous component was particularly abundant, with notably higher concentrations of Fe, Sc, Co and Cs and REEs. In contrast, TMFs throughout 2002–2004 (excluding the hurricane periods) averaged only 0.73 g m⁻² d⁻¹ and had a larger marine biogenic component. The extraordinary elemental fluxes during the 29 days of hurricane-influenced sedimentation represented a great proportion of the totals over an entire “normal” year: Co (67.8%) >Sc (62.6) >Fe (59.6) >Cs (53.4)>Lu (51.5)>La (51.3)>Yb (51.0)>Ce (49.5) >Tb (48.4) >Sm (44.7)>Cr (36.5) >Ca (31.0)>Eu (25.4%). The terrigenous fraction was calculated using (a) TMF minus the sum of CaCO₃, biogenic silica and organic matter and (b) the ratio of Sc in the trap samples to the average in the Earth's crust. The latter was consistently smaller, but the two methods offered similar results following hurricanes (78% vs. 63%, respectively). For normal sedimentation, however, the difference method yielded values twice as large as the Sc method (58% vs. 30%) This suggests that the mineralogy of the terrigenous fraction may also vary, with unsorted dessert soil being carried to sea by the powerful flash floods associated with hurricanes. Eolian supply of particles, particularly Sc-free quartz grains, possibly from beyond the limited fluvial drainage basin, apparently dominates normal sedimentation.     

A derived probability distribution approach to stormwater quality modeling

The closed-form analytical stormwater quality models are developed for simulating urban catchment pollutant buildup and washoff processes. By integrating the rainfall–runoff transformation with pollutant buildup and washoff functions, stormwater quality measures, such as the cumulative distribution functions (CDFs) of pollutant loads, the expected value of pollutant event mean concentrations (EMCs) and the average annual pollutant load can be derived. This paper presents methodologies and major procedures for the development of urban stormwater quality models based on derived probability distribution theory. In order to investigate the spatial variation in model parameters and its impact on stormwater pollutant buildup and washoff processes as well as pollutant loads to receiving waters, an extended form of the original rainfall–runoff transformation which is based on lumped runoff coefficient approach is proposed to differentiate runoff generation mechanisms between the impervious and pervious areas of the catchment. In addition, as a contrast to the aggregated pollutant buildup models formulated with a single lumped buildup parameter, the disaggregated form of the pollutant buildup model is proposed by introducing a number of physically-based parameters associated with pollutant buildup and washoff processes into the pollutant load models. The results from the case study indicate that analytical urban stormwater management model are capable of providing results in good agreement with the field measurements, and can be employed as alternatives to continuous simulation models in the evaluation of long-term stormwater quality measures.     

Modelling Regional Scale Surface Energy Exchanges And Cbl Growth In A Heterogeneous, Urban-Rural Landscape

Over the last decade, simple models of theconvective boundary layer (CBL) have beensuggested as an approach to inferring regionallyaveraged land-air exchanges of heat, water and tracegases, because the properties of the CBL respond toan average of the underlying small-scaleheterogeneity. This paper explores the use of anintegral CBL method to infer regionally averagedfluxes in a landscape that has at least three majorsources of heterogeneity – irrigated andnon-irrigated rural land use and a large urban area(Sacramento region, California).The first part of the paper assesses the validity ofthe simple slab model of the CBL – this isintegrated forwards in time using local-scalemeasured heat and water vapour fluxes, to predictmixed-layer depth, temperature and humidity. Of thefour different CBL growth schemes used, the Tennekesand Driedonks model is found to give the bestperformance. Evaluation of the model performancewith different weightings of heat and water vapourfluxes based on the land use characteristics in theregion suggest that the source area for theboundary-layer sonde measurements is larger thanphysically-based estimates would suggest.Finally, measured time series of potentialtemperature are used to infer regionally averagedsensible heat fluxes using an integral CBL (ICBL)method. These ICBL fluxes are compared with thosemeasured at the local scale over the three land usetypes that comprise the region of interest. They arefound to be closest to the heat fluxes calculated byappropriately weighting the measured heat fluxes inthe source area calculated for the ICBL. We concludethat the integral CBL budget method providesadequate estimates of regionally-averaged surfaceheat fluxes in a landscape that is characterised bysurface types with distinctly different surfaceenergy budgets.     

Measured And Simulated Latent And Sensible Heat Fluxes At Two Marine Sites In The Baltic Sea

In this study, turbulent heat flux data from two sites within the Baltic Sea are compared with estimates from two models. The main focus is on the latent heat flux. The measuring sites are located on small islands close to the islands of Bornholm and Gotland. Both sites have a wide wind direction sector with undisturbed over-water fetch. Mean parameters and direct fluxes were measured on masts during May to December 1998.The two models used in this study are the regional-scale atmospheric model HIRLAM and the ocean model PROBE-Baltic. It is shown that both models overestimate the sensible and latent heat fluxes. The overestimation can, to a large extent, be explained by errors in the air-water temperature and humidity differences. From comparing observed and modelled data, the estimated 8-month mean errors in temperature and humidity are up to 1 °C and 1 g kg^-1, respectively. The mean errors in the sensible and latent heat fluxes for the same period are approximately 15 and 30 W m^-2, respectively.Bulk transfer coefficients used for calculating heat and humidity fluxes at the surface were shown to agree rather well with the measurements, at least for the unstable data. For stable stratification, the scatter in data is generally large, and it appears that the bulk formulation chosen overestimates turbulent heat fluxes.     

VERTICAL STRUCTURE OF SECOND-MOMENT TURBULENT VARIABLES*

Two kinds of observational data,fluctuation and mean profile measurements,from a 325 m meteorological tower in Beijing,China,are used to evaluate local scales of velocity and temperature for higher heights by flux-gradient mean profiles and eddy-correlation techniques.A comparison of these methods each other was made in terms of vertical turbulence fluxes for momentum and beat at the same heigbt.The vertical profiles of non-dimensional second moments.such as vertical turbulent fluxes of momentum and heat.velocity and temperature standard deviations,were derived by local similarity theory.The local similarity relations expressed that the vertical distributions of non-dimensional second moment variables were found to be functions of z/Λ and z/h in the stable boundary layer and the function of z/Z_i for the convective boundary layer,where A the local Monin Obukhov(M-O) length. h the height of stable boundary layer and Z_i the height of mixed-layer.These relations are shown to agree well with the observational data.     

南海北部1987～1988年颗粒物质和硅藻通量的季节性变化:季风气候与 El Nino的响应

南海北部1987年9月～1988年10月沉积物捕获器中颗粒物质和硅藻通量的季节性变化受到季风气候的控制.颗粒物质与硅藻在东北和西南季风盛行期增加,在季风转变期减少.浅层和深层的颗粒总通量、蛋白石通量、碳酸钙通量、蛋白石/颗粒总通量比值、碳酸钙/颗粒总通量比值、有机碳/磷的比值以及浅层硅藻Thalassionema nitzschioides、Coscinodiscus excentricus、Coscinodiscus nodulifer、Nitzschia marina和Rhizosolenia bergonii的通量在东北季风期间明显地增加了,这些变化可能与1987年～1988年发生的EINino事件相关.