小剪跨比格构式混凝土墙体抗震性能试验

文章旨在研究不同剪跨比的格构式混凝土墙体抗震性能.将生产车间预制成EPS保温模块拼接成墙体模板,在横向和纵向孔洞中分别布置钢筋,然后在孔内浇筑自密实混凝土,形成“EPS新型节能”格构式混凝土墙体,然后对6个参数不同的试件进行低周反复水平荷载作用的试验.结果,墙体破坏形态为:首先墙体相邻格构柱间的连梁出现环状裂缝和“X”...     

识别天然地震和人工爆破的判据选择

从快速识别事件性质的要求出发,分析了天然地震和人工爆破的发震时间,P波初动方向,P波、S波振幅比值,P波、S波最大振幅与尾波持续时间比值等判据,得到P波初动方向和P最大振幅与S最大振幅比值是识别爆破和地震的两个有效判据,为研制“识别天然地震和人工爆破的分类决策支持系统”提供了应用依据.     

唐山M 4.8地震地磁谐波振幅比变化

针对2012年5月28日河北唐山M 4.8地震,采用地磁谐波振幅比方法,分析昌黎、静海、红山及承德地磁台2007年1月至2015年12月地磁观测数据,结果显示：各台站10 min周期的计算结果波动性明显,其他周期形态较为一致;距震中最近的昌黎地磁台Y_ZHx（NS）测向的10-40 min周期地磁谐波在下降至极低值后,开始转折时发生地震,而Y_ZHy（EW）测向未出现明显转折现象;位于河北平原地震带中部的静海地磁台对此次地震反应显著,2个测向在震前均出现下降-转折-上升的变化特征。通过对比位于不同地区的4个地磁台站地磁谐波振幅比变化,发现受大范围整体构造应力场作用的影响,计算结果具有相似的趋势性变化特征,具体到局部地区或断裂带内部,各台站之间显示出一定差异。     

对修订现行工业CT相关国家标准的建议

2012年以来我国发布了一系列关于工业CT的国家标准。虽然起到了相当的积极作用,但是仍然暴露出一些明显的不足之处。本文就名词术语标准的制定、空间分辨率的检测条件、对比度分辨率、低对比度空间分辨率、加强对于圆盘模体测定技术的研究和测定透射散射比等问题提出若干修订的建议。     

基于接收函数方法研究川滇块体东边界的地壳厚度和泊松比

本文使用沿川滇块体东边界主要断裂带(安宁河、则木河、小江断裂带)布设的37个临时台站和四川区域台网14个固定台站记录的远震波形资料,用时间域迭代反褶积方法提取接收函数,采用接收函数H-κ反演方法得到了30个台站下方的地壳厚度和泊松比。研究结果表明,川滇块体东边界的地壳厚度表现为自西向东由60km左右向华南块体(35km左右)逐渐减薄的过渡带特征:以安宁河—大凉山断裂带为界,以西地壳厚度平均在54km左右,以东作为华南块体与川滇块体的交界前缘,地壳厚度在42~48km之间。以小江断裂带与则木河断裂带交汇处为界,其南北两侧的地壳岩性和组分差异明显。小江断裂带北段泊松比值在0.20~0.27之间,表明其地壳物质组分主要为中基性岩石。而以北的安宁河、则木河及马边—盐津断裂带的泊松比值大多位于0.27~0.32之间。安宁河—则木河断裂带附近多数台站的泊松比值0.30,可能是部分熔融造成的。     

Soil–pile–structure interaction: experimental outcomes from shaking table tests

An effective way to study the complex seismic soil‐structure interaction phenomena is to investigate the response of physical scaled models in 1‐g or n‐g laboratory devices. The outcomes of an extensive experimental campaign carried out on scaled models by means of the shaking table of the Bristol Laboratory for Advanced Dynamics Engineering, University of Bristol, UK, are discussed in the present paper. The experimental model comprises an oscillator connected to a single or a group of piles embedded in a bi‐layer deposit. Different pile head conditions, that is free head and fixed head, several dynamic properties of the structure, including different masses at the top of the single degree of freedom system, excited by various input motions, e.g. white noise, sinedwells and natural earthquake strong motions recorded in Italy, have been tested. In the present work, the modal dynamic response of the soil–pile–structure system is assessed in terms of period elongation and system damping ratio. Furthermore, the effects of oscillator mass and pile head conditions on soil–pile response have been highlighted, when the harmonic input motions are considered. Copyright © 2015 John Wiley & Sons, Ltd.     

基于FEA的填充墙与隔震器协同抗震系统性能分析

隔震器与填充墙对建筑抗震性能有很大作用。为了探究填充墙布置形式及填充材料和隔震器协同作用对钢筋混凝土框架结构动力特性及抗震性能的影响,采用等效斜撑理论,对3种不同填充墙布置形式与隔震器协同作用的抗震系统方案进行对比分析,研究发现顶层不布置填充墙与隔震器协同抗震系统钢筋混凝土框架结构的抗震性能最佳。在此系统上分析了不同填充材料对钢筋混凝土框架结构抗震性能的影响,结果表明,加气混凝土砌块填充墙的钢筋混凝土框架结构抗震性能最好。     

可控震源记录中的脉冲噪声分析

噪声分析一直是地震资料信噪比得以改善的重要基础方法。可控震源向地下输入瞬时低能量信号, 易受到可控震源系统内部以及背景中的瞬时脉冲噪声(如电噪声、震动噪声等)的干扰。用于提取有效信号的相关检测方法将脉冲噪声的干扰范围扩大, 严重影响了对可控震源有效信号的提取。为了从理论上分析脉冲噪声对可控震源相关记录的干扰, 通过仿真实验, 系统分析了单点脉冲和多点脉冲噪声对相关记录中可控震源信号的干扰程度和特点。结果表明, 可控震源相关记录中的信号主要受脉冲噪声强度、所在时间位置以及可控震源非相关记录脉冲点数比例三方面因素影响, 脉冲噪声所占记录的比例大于2.5%且平均强度高于100时, 相关检测后的可控震源信号会完全被噪声淹没。     

Long-Term Observations of Isotope Ratio Accuracy and Reproducibility Using Quadrupole ICP-MS

High precision isotope ratio and trace element determination can be achieved with modern quadrupole ICP-MS provided that short and long-term instrument performance is accurately monitored. Here we present results for the isotope ratios ⁶Li/⁷Li, ¹⁴⁷Sm/¹⁴⁹Sm, ¹⁶⁰Dy/¹⁶¹Dy, ²⁰⁷Pb/²⁰⁶Pb, ²⁰⁸Pb/²⁰⁶Pb, ²⁰⁶Pb/²⁰⁴Pb and ²³⁵U/²³⁸U with which we determined long-term isotope ratio stability of relevance to both trace element and isotope determination. With respect to trace element determination, we first present long-term observations regarding oxide formation rates of Ba and Nd on light REE and heavy REE, as well as Zr on Ag. These showed good correlations and could be used to correct effectively the interference. The efficacy of this correction was demonstrated with analyses of the rock reference material BHVO-2 at both low and high oxide formation rates. Next, we studied the long-term reproducibility of a Dy isotope ratio that was measured to correct for the isobaric interference on Gd. It was found that, regardless of tuning condition, the ratio reproduced very well (0.58% RSD, 1s) and that the estimate of the Gd concentration did not suffer from the large correction (> 10%) caused by the Dy isobar. Long-term reproducibilities of Li, Sm and U isotope ratios, required for accurate mass bias correction when isotopically enriched internal standards of these elements are employed, were measured in the rock reference materials AGV-2 and JA-3 over a time period of up to 3 years. As expected, the Li isotope ratio showed the largest variability (RSD = 7%), but the other two ratios had relative external reproducibilities of only 1.01% (1s, U) and 0.67% (Sm). The mass bias-induced scatter in measurements for Sm and U was so small that the internal standard correction was effective, even for samples with high concentrations of these elements. With regard to Pb-isotope ratio determination, we also present long-term reproducibility for NIST SRM 982, run as an unknown and two accuracy tests for Pb separated from granitoids and from meteorites. It is demonstrated that the obtained ratios, including those involving ²⁰⁴Pb, are accurate relative to MC-ICP-MS determinations and of comparable precision to conventional TIMS analysis. The excellent agreement between all data sets shows the potential of modern quadrupole ICP-MS instrumentation for Pb-isotope determination, particularly for samples with very low Pb content.