Prey and plastic ingestion of Pacific Northern Fulmars (Fulmarus glacialis rogersii) from Monterey Bay,California

Marine plastic pollution affects seabirds, including Pacific Northern Fulmars (Fulmarus glacialis rodgersii), that feed at the surface and mistake plastic for prey or incidentally ingest it. Direct and indirect health issues can result, including satiety and possibly leading to inefficient foraging. Our objective was to examine fulmar body condition, identify cephalopod diet to species, enumerate and weigh ingested plastic, and determine if prey number and size were correlated with ingested plastics in beach-cast fulmars wintering in Monterey Bay California (2003, n = 178: 2007, n = 185). Fulmars consumed mostly Gonatus pyros, G. onyx, and G. californiensis of similar size for both years. We found a significant negative correlation between pectoral muscle index and average size of cephalopod beaks per stomach; a significant increase in plastic categories between 2003 and 2007; and no significant correlation between number and mass of plastic compared with number and size of prey for either year.     

Is marine debris ingestion still a problem for the coastal marine biota of southern Brazil?

The accumulation of synthetic debris in marine and coastal environments is a consequence of the intensive and continuous release of these highly persistent materials. This study investigates the current status of marine debris ingestion by sea turtles and seabirds found along the southern Brazilian coast. All green turtles (n = 34) and 40% of the seabirds (14 of 35) were found to have ingested debris. No correlation was found between the number of ingested items and turtle’s size or weight. Most items were found in the intestine. Plastic was the main ingested material. Twelve Procellariiformes (66%), two Sphenisciformes (22%), but none of the eight Charadriiformes were found to be contaminated. Procellariiformes ingested the majority of items. Plastic was also the main ingested material. The ingestion of debris by turtles is probably an increasing problem on southern Brazilian coast. Seabirds feeding by diverse methods are contaminated, highlighting plastic hazard to these biota.     

The red swamp crayfish Procambarus clarkii in Europe: Impacts on aquatic ecosystems and human well-being

Procambarus clarkii is currently recorded from 16 European territories. On top of being a vector of crayfish plague, which is responsible for large-scale disappearance of native crayfish species, it causes severe impacts on diverse aquatic ecosystems, due to its rapid life cycle, dispersal capacities, burrowing activities and high population densities. The species has even been recently discovered in caves. This invasive crayfish is a polytrophic keystone species that can exert multiple pressures on ecosystems. Most studies deal with the decline of macrophytes and predation on several species (amphibians, molluscs, and macroinvertebrates), highlighting how this biodiversity loss leads to unbalanced food chains. At a management level, the species is considered as (a) a devastating digger of the water drainage systems in southern and central Europe, (b) an agricultural pest in Mediterranean territories, consuming, for example, young rice plants, and (c) a threat to the restoration of water bodies in north-western Europe. Indeed, among the high-risk species, P. clarkii consistently attained the highest risk rating. Its negative impacts on ecosystem services were evaluated. These may include the loss of provisioning services such as reductions in valued edible native species of regulatory and supporting services, inducing wide changes in ecological communities and increased costs to agriculture and water management. Finally, cultural services may be lost. The species fulfils the criteria of the Article 4(3) of Regulation (EU) No 1143/2014 of the European Parliament (species widely spread in Europe and impossible to eradicate in a cost-effective manner) and has been included in the “Union List”. Particularly, awareness of the ornamental trade through the internet must be reinforced within the European Community and import and trade regulations should be imposed to reduce the availability of this high-risk species.     

Effects of plastic fines on the instability of sand

The effects of plastic fines on the instability of sand were studied in this article. For this purpose, the results of undrained monotonic triaxial compression tests conducted on specimens of sand with variation in fines content from 0% to 30% are presented. The specimens were prepared in two different initial dry unit densities and were subjected to two different confining pressures. The results of the tests are shown in four groups. They demonstrate that an increase in plastic fines leads to an increase in the instability, followed by a decrease with a further increase in fines content. It is also seen that the slope of the steady-state lines in p’-q space increases with increase in fines content, but after certain fines content, it begins to decrease. A reverse trend is observed for the slope of instability lines; it decreases at lower fines content, followed by an increase with a further increase in fines content.     

超高压变质岩的塑性流变：显微构造和变形机制

超高压变质岩是大陆深俯冲作用的产物。超高压变质岩在深俯冲和快速折返过程中,经历了长距离地构造搬运和构造力的作用。其构造变形主要集中在韧性剪切带中,并发生强烈地塑性流变。研究超高压变质构造岩的显微构造及其变形机制对于深入了解大陆壳岩石在深俯冲过程中的流变学行为有十分重要的意义,山东仰口的超高压韧性剪切带中榴辉岩质和花岗质糜棱岩记录了超高压变形的历史。在超高压条件下的稳定矿物绿辉石、多硅白云母、兰晶石和钾长石具有不规则波状消光、亚晶界、核幔构造和动态重结晶等显微构造特征,TEM 研究揭示了大量的位错构造,表明位错蠕变是其主要的变形机制。在花岗质糜棱岩中,金红石在刚性矿物的压力影中沉积,细粒的石榴石条带平行片理延伸,都说明超高压变形过程中有流体存在,流体助力的物质扩散迁移是又一个重要的变形机制。依据现有的流变学定律估算的流变应力应该在几十兆帕以上。     

Effect of water and stress on the lattice-preferred orientation of olivine

The influence of water and stress on the lattice-preferred orientation (LPO) of olivine aggregates was investigated through large strain, shear deformation experiments at high pressures and temperatures (P = 0.5–2.1 GPa, T = 1470–1570 K) under both water-poor and water-rich conditions. The specimens are hot-pressed synthetic olivine aggregates or single crystals of olivine. Water was supplied to the sample by decomposition of a mixture of talc and brucite. Deformation experiments were conducted up to γ (shear strain)  6 using the Griggs apparatus where water fugacity was up to  13 GPa at the pressure of 2 GPa. The water content in olivine saturated with water increases with increasing pressure and the solubility of water in olivine at P = 0.5–2 GPa was  400–1200 ppm H/Si. Several new types of LPO in olivine are found depending on water content and stress. Samples deformed in water-poor conditions show a conventional LPO of olivine where the olivine [100] axis is subparallel to the shear direction, the (010) plane subparallel to the shear plane (type-A). However, we identified three new types (type-B, C, and E) of LPO of olivine depending on the water content and stress. The type-B LPO of olivine which was found at relatively high stress and/or under moderate to high water content conditions is characterized by the olivine [001] axis subparallel to the shear direction, the (010) plane subparallel to the shear plane. The type-C LPO which was found at low stress and under water-rich conditions is characterized by the olivine [001] axis subparallel to the shear direction, the (100) plane subparallel to the shear plane. The type-E LPO which was found under low stress and moderate water content is characterized by the olivine [100] axis subparallel to the shear direction, the (001) plane subparallel to the shear plane. Observations by transmission electron microscopy (TEM) and scanning electron microscopy (SEM) show that the dislocations in water-poor samples (type-A) are curved and both b =  [100] and b = [001] dislocations have a similar population. Numerous subgrains are seen in water-poor samples in backscattered electron images. In contrast, water-rich samples (both type-B and type-C) contain mostly b = [001] dislocations and dislocations are straight and sub-grain boundaries are rare compared to those in water-poor samples. These observations suggest that (1) dominant slip systems in olivine change with water fugacity (and stress) and (2) grain boundary migration is enhanced in the presence of water. Seismic anisotropy corresponding to the fabrics under water-rich condition is significantly different from that under water-poor condition. Consequently, the relationship between seismic anisotropy and flow geometry in water-rich regions is expected to be different from that in water-poor regions in which type-A fabric dominates (i.e., the lithosphere). A few cases are discussed including anisotropy in the subduction zone and in the deep upper mantle.     

High-levels of microplastic pollution in a large,remote, mountain lake

Despite the large and growing literature on microplastics in the ocean, little information exists on microplastics in freshwater systems. This study is the first to evaluate the abundance, distribution, and composition of pelagic microplastic pollution in a large, remote, mountain lake. We quantified pelagic microplastics and shoreline anthropogenic debris in Lake Hovsgol, Mongolia. With an average microplastic density of 20,264 particles km⁻², Lake Hovsgol is more heavily polluted with microplastics than the more developed Lakes Huron and Superior in the Laurentian Great Lakes. Fragments and films were the most abundant microplastic types; no plastic microbeads and few pellets were observed. Household plastics dominated the shoreline debris and were comprised largely of plastic bottles, fishing gear, and bags. Microplastic density decreased with distance from the southwestern shore, the most populated and accessible section of the park, and was distributed by the prevailing winds. These results demonstrate that without proper waste management, low-density populations can heavily pollute freshwater systems with consumer plastics.