北秦岭华阳川地区重磁三维反演及岩浆岩特征研究

华山岩体、老牛山杂岩体等中酸性花岗岩体和华阳川韧性剪切带在北秦岭华阳川地区的成矿过程中起着重要的作用,既是构造演化的记录,又是构造—岩浆—成矿的重要指示。本文在系统研究华阳川地区地面和航空重力、磁测数据以及地面电法剖面等多种地球物理资料的基础上,完成物性统计分析、航空和地面数据融合处理,通过先验信息约束的重磁2.5D交互式反演和三维反演计算,构建了华阳川地区区域三维地质—地球物理模型,为区域地质背景和深部地质构造的研究提供地球物理依据;推断解释了华山岩体、老牛山岩体和华阳川韧性剪切带的三维形态和空间分布,探讨了华阳川韧性剪切带、老牛山岩体和华山岩体的深部接触关系,对大岩体外围接触带的铀、钼等矿床的深部找矿具有一定指导意义。     

Seismic traveltime inversion of 3D velocity model with triangulated interfaces

Seismic traveltime tomographic inversion has played an important role in detecting the internal structure of the solid earth. We use a set of blocks to approximate geologically complex media that cannot be well described by layered models or cells. The geological body is described as an aggregate of arbitrarily shaped blocks, which are separated by triangulated interfaces. We can describe the media as homogenous or heterogeneous in each block. We define the velocities at the given rectangle grid points for each block, and the heterogeneous velocities in each block can be calculated by a linear interpolation algorithm. The parameters of the velocity grid positions are independent of the model parameterization, which is advantageous in the joint inversion of the velocities and the node depths of an interface. We implement a segmentally iterative ray tracer to calculate traveltimes in the 3D heterogeneous block models. The damped least squares method is employed in seismic traveltime inversion, which includes the partial derivatives of traveltime with respect to the depths of nodes in the triangulated interfaces and velocities defined in rectangular grids. The numerical tests indicate that the node depths of a triangulated interface and homogeneous velocity distributions can be well inverted in a stratified model.     

GPS单点测速技术在海浪测量中的应用研究

分析比对了GPS单点测速技术与其他已有测波手段的不同,讨论了基于多普勒频移的GPS测速方法,并分析了各类误差对测速精度的影响。分别利用原始多普勒值和导出多普勒值进行了静态测速试验和动态测速试验,将导出多普勒测速结果与RTK（RealTimeKinematic,实时动态测量系统）位置差分测速进行了比测。结果表明,使用静态数据采用高频导出多普勒值测速的精度可以达到亚厘米级每秒,而采用原始多普勒观测值进行测速因接收机型号的不同,结果差异较大;动态测速试验中,采用导出多普勒测速的方法与RTK位置差分测速的符合精度可达cm／s。     

塔克拉玛干沙漠腹地风蚀起沙特征观测研究

利用塔克拉玛干沙漠腹地塔中气象站2009—2018年的地面观测资料,分析塔中地区的风蚀起沙特征,结果表明:(1)塔中地区临界起沙风速呈明显的季节变化特征,夏季>春季>秋季>冬季,临界起沙风速介于4.47～4.92 m/s;(2)春、夏季是风蚀事件的多发季节,春、夏季沙尘水平通量的平均值分别为2638.9、3298.9 ...     

煤岩动静力学参数关系试验研究

煤岩的动、静力学参数关系的试验研究,对研究煤岩的位移和变形特征及工程支护设计具有重要意义。将取自新河煤矿3煤的煤样加工成Φ50 mm×100 mm的圆柱体标准试件;采用500 kHz频率的纵横波换能器分别进行纵横波速度测试;在MTS815.03电液伺服试验机上进行单轴压缩试验,得到静态弹性模量和泊松比。试验结果表明:煤岩动弹性模量与横波速度相关性强于与纵波速度的相关性,煤岩介质的纵波对孔隙和裂隙发育程度的敏感程度要比横波高;煤岩试件Ed/Es比值主要集中在1.4~1.7,室内煤岩试件动、静弹性模量和动静泊松比之间存在较好的线性相关关系。     

不同温压条件下蛇纹岩和角闪岩中波速与衰减的各向异性

在实验室中研究了蛇纹岩和角闪岩样品在不同温压条件下的纵、横波速度和Q值．这两种岩样对应的主要组成矿物叶蛇纹石和普通角闪石都具有很强的晶格优选方位（LPO）．随着围压的增加,波速和Q值均增大,但是在相互正交的三个方向上（垂直或平行于层理面及线理方向）增大的速度并不相同,这与微裂隙的逐渐闭合密切相关．在600MPa的围压下升高温度直到600℃以上,由于微裂隙的热扩张受到约束,波速和Q值下降幅度很小．观测到的波速和Q值的各向异性具有不同的机理,波速各向异性主要与定向分布的微裂隙和主要矿物的LPO等构造因素有关;高围压下纵波Q值各向异性与速度各向异性正好相反,可能是由于形成层理面的定向排列的平板状矿物晶体沿不同方向边界之间接触程度不同造成的．     

东太平洋我国开辟区底层海流锚泊观测

“海洋四号”在执行ＤＹ９５－７和ＤＹ９５－９航次调查任务期间,在东太平洋我国开辟区做了２个测站的底层海流观测。观测资料分析表明,底层流的流速在１．２～１２．０ｃｍ／ｓ之间;底层流有月际和日际变化,并发现底层流存在“不活动”期。     

一次春季黄海海雾和东海层云关系的研究

结合多种观测数据和数值模拟结果对2011年3月12—13日的一次黄海海雾过程进行分析。观测数据分析表明:此次黄海海雾过程与东海层云之间存在密切的联系。地面高低压位置为水汽从层云区向北输送提供了有利的环流条件;黄海上空天气尺度下沉运动,加强了海洋大气边界层(MABL)层结的稳定性,MABL顶自南向北高度降低,有利于水汽在向北输送过程中不断向海面聚集;下沉导致的干层以及逆温层对海雾的发生发展起重要作用。模式结果进一步证明天气尺度下沉运动与MABL内的下沉在29°—30°N附近同位相叠加,使得该海区上空的下沉运动明显增强,边界层高度迅速下降。下沉可能会导致气块温度升高,云滴蒸发,来自层云区的水汽随流场向北向下输送逐渐接近冷海面凝结成雾,近海面水汽的平流输送使海雾进一步向北发展。本研究为海雾预报提供新的参考思路。     

低序级断层成像技术在c13地区的应用

低序级断层在地震剖面上,通常表现为具有微小错动,同相轴扭曲,或者振幅变弱,延伸短、断距小、识别难,描述难等特征。在对采集处理过程中影响低序级断层识别的观测系统面元网格、信噪比、频率、速度误差等因素详细分析的基础上,通过建立全波场正演地质模型,借助方查体属性技术以及井资料,研究了针对性的处理技术。同时利用相干体属性、曲率属性沿层切片、方差体等技术进行有效识别低级序断层,取得了较好的效果。     

The vertical structure of the atmospheric boundary layer over the central Arctic Ocean

The tropopause height and the atmospheric boundarylayer （PBL） height as well as the variation of inversion layer above the floating ice surface are presented using GPS （global position system ） radiosonde sounding data and relevant data obtained by Chinas fourth arctic scientific expedition team over the central Arctic Ocean （86°-88°N, 144°-170°W） during the summer of 2010. The tropopause height is from 9.8 to 10.5 km, with a temperature range between -52.2 and -54.10C in the central Arctic Ocean. Two zones of maximum wind （over 12 m/s） are found in the wind profile, namely, low- and upper-level jets, located in the middle troposphere and the tropopause, respectively. The wind direction has a marked variation point in the two jets from the southeast to the southwest. The average PBL height determined by two methods is 341 and 453 m respectively. These two methods can both be used when the inversion layer is very low, but the results vary significantly when the inversion layer is very high. A significant logarithmic relationship exists between the PBL height and the inversion intensity, with a correlation coefficient of 0.66, indicating that the more intense the temperature inversion is, the lower the boundary layer will be. The observation results obviously differ from those of the third arctic expedition zone （800-85° N）. The PBL height and the inversion layer thickness are much lower than those at 870-88° N, but the inversion temperature is more intense, meaning a strong ice- atmosphere interaction in the sea near the North Pole. The PBL structure is related to the weather system and the sea ice concentration, which affects the observation station.