混合充填骨料胶结充填强度试验与最优配比决策研究

将全尾砂作为充填料进行充填法采矿,不仅可以降低采矿成本,而且还能够实现固体废弃物资源化利用,同时将固体废弃物充填地下保护环境,维护生态平衡。由于尾砂粒径较细,需要与棒磨砂、戈壁砂混合作为充填料应用于充填采矿,有必要开展混合充填骨料的配比优化研究。首先,分别测试了棒磨砂、戈壁砂和尾砂3种骨料的粒径级配和不均匀系数。然后进行了9组配比的胶结充填体强度试验,在该基础上对试验样本进行训练,建立了神经网络预测模型。最后采用该预测模型,进行混合充填骨料正交设计方案的充填体强度预测,并分别采用极差分析和回归分析,揭示了充填体强度与混合充填骨料特征值之间的关系。研究发现,混合骨料平均粒径和不均匀系数不同,充填体早期和后期强度存在显著差异;平均粒径较小的混合骨料早期强度较高,而平均粒径较大者则更利于提高充填体的后期强度。     

渗透压-应力耦合作用下煤体常规三轴试验的颗粒流模拟

为了研究在渗透压-应力耦合作用下围压和瓦斯压力对煤体变形破坏规律的影响,借助PFC2D软件进行了340组抗压及抗拉试验模拟,建立了煤体宏观力学参数与细观参数之间的关系。利用平行黏结模型和推导得出的细观参数,对煤体进行了不同围压和瓦斯压力条件下常规三轴试验的颗粒流模拟,并将模拟结果与物理试验结果进行对比及误差分析,对煤体宏观力学参数的变化规律进行了总结。分析结果表明,经过推导得到的宏细观参数关系,可以控制模拟结果的误差在10%之内,能较好地模拟煤体的力学特征;围压增大时,煤体的抗压强度、残余强度及弹性模量呈增大趋势,泊松比以及煤体的破裂角度变小,与物理试验所得围压对煤体的刚度和强度起增强作用的结论一致;瓦斯压力的升高会导致煤体抗压强度,残余强度及弹性模量减小,泊松比以及煤体破裂角度变大,验证了物理试验中瓦斯压力对煤体强度具有劣化作用的结论。     

Factors controlling the formation of coppice dunes (nebkhas) in the Negev Desert

Due to their role in increasing fertility, coppice dunes (nebkhas) are regarded by many researchers as important contributors to aridland ecosystems. Yet, despite their frequent occurrence, little information exists regarding the rate and factors that control their formation. The goal of the current study is to examine the formation rate and factors that determine the establishment of coppice dunes in the Hallamish dune field in the western Negev Desert. The rate in which sand and fines, hereafter aeolian input (AI) was trapped and its particle size distribution (PSD) were examined by means of the solidification of 2 m × 2 m plots using surface stabilizers, and by the installation of three pairs of artificial shrubs (SH), three pairs of artificial trees (TR), and a pair of control (CT) plots. Measurements were annually conducted during June 2004 and June 2008, with monthly collection during June 2004 and May 2006. The PSD was compared to coppice dunes located on the fine‐grained playa surface. AI was trapped at SH, while it was not trapped at TR and CT. The annual rate of AI accretion under the canopy was highly variable ranging between 1405 and 13 260 g m^?2, with a four‐year average of 5676 g m^?2, i.e. 3.8 mm a^?1. It depended upon the wind power, with drift potential having a threshold velocity of U_t > 10 m s^?1 yielding the higher correlations with the monthly AI (r² = 0.59–0.84). No significant relations were obtained between the monthly AI and shrub height. Sand saltation, suspension and creep are seen responsible for mound formation, which based on the current rates of sand accretion are relatively fast with a 60 cm‐high coppice dune forming within ~150–160 years. The current data highlight the problematic design of some previous research using conventional traps and confining the measurements only to certain seasons. Copyright © 2015 John Wiley & Sons, Ltd.     

脆性颗粒材料的动态多尺度模型研究

脆性颗粒材料的多尺度模型一般包含微观尺度的基本粒子、细观尺度的颗粒和宏观尺度的颗粒堆积体3个尺度。基于离散元方法（DEM）构建多尺度模型,并将该模型应用于动态加载。首先,对多尺度模型所涉及的两种接触模型和两种黏结模型的参数进行分析,详细讨论微细观模型参数与宏观材料常数之间的联系。然后,选用Hertz-Mindlin接触模型[1]和平行键黏结模型,建造石英砂的动态多尺度模型。通过选择合适的强度和局部阻尼参数发现,模型宏细观尺度上的动态压缩响应与对石英砂的相关试验结果吻合很好。利用多尺度模型和选定的参数,探讨与动态加载密切相关的局部阻尼机制对多尺度模型各个尺度上力学响应的影响。结果表明,阻尼越大则颗粒材料对波的衰减能力越强,但过高的阻尼会使团簇强度和模型的宏观压缩曲线都表现出异常的加载速度效应（后者实际是阻尼引起的微惯性效应）。另外,高阻尼会过度衰减颗粒破碎过程产生的应力波,从而阻碍颗粒破碎。最后,应用改进的动态多尺度模型,对脆性颗粒材料的动态破碎特性进行研究,发现该模型不但能给出与试验相吻合的颗粒级配曲线,还能揭示出颗粒破碎过程中微裂纹分布的空间不均匀性,即颗粒破碎过程中波的产生机制和衰减机制相互作用导致的微裂纹聚团分布的现象。     

土结构强度模型研究

长期以来,很多学者在土的强度问题方面做了大量的研究工作,也取得了不少成果。但土的结构性对强度的影响一直是这一问题的难点。以土的颗粒连接为基本点,建立了土结构强度模型,并对其进行分析,发现土体的强度直接与颗粒之间的连接强度和连接的分布形态有关。将统计域上形成的应力强度曲线族,当作宏观分析的土体性能的代表点考察时,可以自然地得到多个曲面构成的屈服面。通过对简化的土结构形态例子的分析,当各方向的连接为均匀分布时,可以得到各向同性的应力强度模型。分析表明,当考虑到统计域的空间特性时,宏观应力在统计域上不同的局部坐标位置,会出现应力梯度对强度产生影响的现象,这是过去的经典理论中所无法解释的。由此可知,土体结构强度模型是一种分析具有结构性土体的新的、有效的方法。     

基于粒子群优化的双力偶模型振幅谱反演方法及应用

发展了一种基于全波形振幅谱的频率域双力偶震源机制反演方法. 通过理论振幅谱与观测振幅谱的拟合搜寻断层面参数, 基于粒子群优化算法可以在较短的时间内得到稳定可靠的解． 数值试验表明, 在定位误差较大, 以及台站布局较差的情况下, 振幅谱反演仍可较为准确地得到震源机制, 并且由此计算得到的最优震源深度仍比较接近真实的震源位置． 使用该方法用2010年5月17日渤海ML4.0地震的震源机制进行了检验, 结果与加权P波初动解非常一致． 应用该方法对山东半岛及近海地区2003——2010年14次MLge;4.0地震震源机制进行了估计．      

High spatial resolution mapping of surface velocities and depths for shallow overland flow

Point measurements of flow rate, depth or velocity are not sufficient to validate overland flow models, particularly when the interaction of the water with the soil surface creates a complex flow geometry. In this study, we present the coupling of two techniques obtaining spatial data of flow depths and surface velocity measurements for water depths as low as 1 mm. Overland flow experiments were performed in the laboratory at various flow rates and slopes on two surfaces. The first surface was 120 cm by 120 cm showing three undulations of sinusoidal shape with an amplitude of 1 cm and a wavelength of 20 cm, while the second was a 60 cm by 60 cm moulded reproduction of a seedbed with aggregates up to 2 cm in size. Large scale particle image velocimetry (LSPIV) was used for velocity measurements with a sub‐centimetre spatial resolution. An instantaneous‐profile laser scanner was used to map flow depths with a sub‐millimetre spatial resolution. A sensitivity analysis of the image processing of the LSPIV showed good robustness of the method. Comparison with measurements performed with hot film anemometer and salt velocity gauge showed that LSPIV surface velocities were representative of the flow. Water depths measured with the laser scanner were also in good agreement with single‐point measurements performed with a dial indicator. Spatially‐distributed flow rates could be computed by combining both presented techniques with a mean relative error less than 20%. Copyright © 2012 John Wiley & Sons, Ltd.     

The proportions and variations of the light absorption coefficients of major ocean color components in the East China Sea

The East China Sea (ECS),one of the largest continental seas,has dynamic hydrology and complex optical characteristics that make ocean color remote-sensing retrieval difficult.The distributions and proportions of the light absorption coefficients of major ocean color components based on two large-scale investigations in the ECS are presented,showing these features in typical summer and winter seasons.The absorption coefficient a CDOM,a NAP and a phy of colored dissolved organic matter,non-algal particle,and pigment of phytoplankton show a decreasing trend from the coast to the outer shelf.According to the a CDOM distribution at 440 nm,the Changjiang River plume shows an abnormal southeastward transport.An extremely high a NAP value patch at 440 nm is present in the middle coast.The chlorophyll-a-specific phytoplankton pigment absorption (a phy) is much higher in winter than in summer,which may cause serious underestimated results when applying the averaged a phy into remote-sensing algorithms for chlorophyll concentration retrieval.The importance of phytoplankton size was evident in outer shelf waters.The absorption of a CDOM (440) is a dominant component accounting for over half of the total seawater absorption in summer.The a NAP (440) accounts for 64% of the absorption of the ECS coastal area in winter.     

基于粒子群双重空间聚类的城镇地价空间分异规律挖掘

城镇地价的空间分异对其动态监测片区划定具有重要的参考作用,而空间聚类则是对该问题进行分析的一种有效方法.文中在分析空间聚类本质的基础上,设计了一种基于样本数据的粒子群双重空间聚类挖掘模型,并以北海市二手房地价空间分布挖掘为实例进行了应用.结果表明:粒子群双重空间聚类在空间聚类效果上优于传统K-均值聚类法,尤其是对于任意形状聚类簇的挖掘;然而,由于标准粒子群优化算法机理的限制,其聚类效果随聚类中心的增多而呈下降趋势.总体而言,该方法能利用有限的样本挖掘质量较好的城镇地价空间分异区,可为城镇地价动态监管提供相     

Stress-strain analysis of loess triaxial shear test by PFC3D

In order to compensate for limitations of microscopic study on loess triaxial tests, taking the loess in Longxi area as an example, the authors established the loess triaxial test model by using PFC3D software and simulating tfiaxial shear test under the different confining pressures in 0 kPa, 50 kPa and 300 kPa. Compared with laboratory triaxial shear test, the numerical simulation test has a guiding role in loess mechanical strength analysis.