冀东太平寨-娄子山太古宙麻粒岩相变质峰期流体研究

冀东太平寨-娄子山地区太古宙麻粒岩系变质峰期流体包裹体首次见于夕线石中,按形 态 和产状可分三类,均形成于峰期至其稍后阶段。它们成分相似。特征是:①富碳质,XC　O2+C　H4=0.64～0.93; ②含少量H2O,XH 2O=0～0.22,且与峰期矿物 组合平衡热力学计算的水活度(aH2O=0.04～0.31)和含量( XH2O=0.03～0.22)完全吻合; ③有时含一定量H2S和SO2; ④盐水溶液 中阴离子总量极低(0.12～0.61mol/L)。石英和石榴石中也有特征相同的这期包裹体。峰 期包裹体中C　O 2均一温度多数 为-28℃～-22℃,密度为0.96～1.06g/cm3,包裹体整体密度应稍高,相应的压力为0.60 ～0.70G Pa。流体的氧逸度lgfO2在-17～-15之间。峰期流体上述各种特征在空间上较 均匀,相邻的不同岩石类型中aH2O值相似,结合地质和原岩特 征分析,认为流体中C　O2可能为深部地幔来源,其成因与基性岩浆底侵及其结晶作 用有关。     

Mechanical transitional behavior of binary mixtures via DEM: Effect of differences in contact-type friction coefficients

This report presents a numerical investigation of the shear behavior of binary mixtures via a two-dimensional discrete element method. The effect of the coarse particle content on the peak shear strength of mixtures is investigated for different contact-type friction coefficients. A detailed analysis on the anisotropies enables us to understand the microscopic mechanisms that result in the dependency of the peak shear strengths on the coarse particle content. The contributions of different contact types to the peak shear strength are quantified. Lastly, the inter-particles structures are examined when the binary mixtures become coarse-particle-supported structures.     

渤海湾西岸全新世海面变化

在讨论海面标志点基本定义的基础上,从渤海湾西岸534个原始数据中获得了136个指示高水位、潮间带或低水位的海面变化标志点,并重建了它们的相对海平面时空分布,进而获得了渤海湾西岸全新世相对海平面变化带.约10cal.ka B.P. 时,相对海平面变化带达到-25m,以约6m/1000a(即约6mm/a)的平均速率上升,在6cal.ka B.P. 前后达到现代海面的高度; 6cal.ka B.P. 至今,变化带的高度介于+1m~-2m之间,未发现中全新世相对高海面.再搬运海相贝类和陆相泥炭类样品的 14C 年龄,分别存在约600年和660年的驻留时间.经过驻留时间校正的新海面变化年代学序列,将渤海湾相对海平面达到现代高度的时间点确定为约6cal.ka B.P.,从而与全球海面变化的对比更为准确.渤海湾盆地的长期稳定下沉和沉积自重压实的共同作用,可能抵消了冰川均衡调整(GIA)引起的中全新世数米高的相对高海面.     

大型基坑工程水平位移监测与预测结果分析

以银川大世界商务广场的基坑为例,介绍了大型基坑工程水平位移监测的实施方案,给出了水平位移监测方法的精度,并对监测成果进行了分析。在此基础上,分别用多项式拟合和时间序列分析模型两种方法进行建模,对基坑水平位移进行预测,结果表明,该基坑水平位移较小,在规范规定的要求之内,说明基坑是稳定的;时间序列分析模型的预测精度要高于多项式拟合模型的精度。     

Optimum design and application of non‐traditional tuned mass damper toward seismic response control with experimental test verification

A variant type of tuned mass damper (TMD) termed as ‘non‐traditional TMD (NTTMD)’ is recently proposed. Mainly focusing on the employment of TMD for seismic response control, especially for base‐isolated or high‐rise structures, this paper aims to derive design formulae of NTTMDs based on two methodologies with different targets. One is the fixed points theory with the performance index set as the maximum magnitude of the frequency response function of the relative displacement of the primary structure with respect to the ground acceleration, and the other is the stability maximization criterion (SMC) to make the free vibration of the primary structure decay in the minimum duration. Such optimally designed NTTMDs are compared with traditional TMDs by conducting both numerical simulations and experiments. The optimum‐designed NTTMDs are demonstrated to be more effective than the optimum‐designed traditional TMDs, with smaller stroke length required. In particular, the effectiveness of the TMDs combined with a base‐isolated structure is investigated by small‐scale model experimental tests subjected to a time scaled long period impulsive excitation, and it is demonstrated that the SMC‐based NTTMD can suppress structural free vibration responses in the minimum duration and requires much smaller accommodation space. Additionally, a small‐scale shaking table experiment on a high‐rise bending model attached with a SMC‐based NTTMD is conducted. This study indicates that NTTMD has a high potential to apply to seismic response control or retrofit of structures such as base‐isolated or central column‐integrated high‐rise structures even if only a limited space is available for accommodating TMDs. Copyright © 2015 John Wiley & Sons, Ltd.     

GNSS授时原理及其精度分析

地震仪授时的准确程度直接影响地震定位能力。目前地震仪均采用卫星定位导航系统进行卫星授时。地震仪中的授时模块易受射频干扰,进而导致地震仪授时不准。研究认为高频元件、电源模块、线路设计及地线部署是产生射频干扰的主要原因。本文在实验的基础上发现,增设隔离板、替换元件、优化线路设计及调整地线部署可以稳定地降低地震仪系统对授时模块的电磁干扰,所用技术可应用于提升地震仪的授时准确度。     

A new approach of selecting real input ground motions for seismic design: The most unfavourable real seismic design ground motions

This paper presents a new way of selecting real input ground motions for seismic design and analysis of structures based on a comprehensive method for estimating the damage potential of ground motions, which takes into consideration of various ground motion parameters and structural seismic damage criteria in terms of strength, deformation, hysteretic energy and dual damage of Park & Ang damage index. The proposed comprehensive method fully involves the effects of the intensity, frequency content and duration of ground motions and the dynamic characteristics of structures. Then, the concept of the most unfavourable real seismic design ground motion is introduced. Based on the concept, the most unfavourable real seismic design ground motions for rock, stiff soil, medium soil and soft soil site conditions are selected in terms of three typical period ranges of structures. The selected real strong motion records are suitable for seismic analysis of important structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake, as they can cause the greatest damage to structures and thereby result in the highest damage potential from an extended real ground motion database for a given site. In addition, this paper also presents the real input design ground motions with medium damage potential, which can be used for the seismic analysis of structures located at the area with low and moderate seismicity. The most unfavourable real seismic design ground motions are verified by analysing the seismic response of structures. It is concluded that the most unfavourable real seismic design ground motion approach can select the real ground motions that can result in the highest damage potential for a given structure and site condition, and the real ground motions can be mainly used for structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake. Copyright © 2007 John Wiley & Sons, Ltd.     

基于分数阶时间导数的黏弹性衰减VTI介质中平面波传播

目前在地震勘探频带范围内通常假设品质因子Q与频率无关,且呈衰减各向同性.事实上,相比较速度各向异性,介质的衰减各向异性同样不可忽视.本文将衰减各向异性和速度各向异性二者与常Q模型相结合,建立了黏弹性衰减VTI介质模型,并基于分数阶时间导数理论,给出了对应的本构关系和波动方程.利用均匀平面波分析和Poynting定理,推导出准压缩波qP、准剪切波qSV和纯剪切波SH的复速度、相速度、能量速度以及品质因子的解析表达式.对模型的正确性进行了数值验证,并分析了qP,qSV和SH波在介质中的传播特性.数值试验结果表明：本模型能够实现理想的恒定Q行为,表现了品质因子和速度的各向异性特征,显示出黏弹性增强将导致能量速度和相速度的频散曲线变化剧烈;速度和衰减各向异性参数与传播角度之间的耦合效应对qP,qSV和SH波的速度和能量影响明显;qP,qSV和SH波的频散曲线和波前面随着衰减各向异性强度的改变发生显著变化,其中耦合在一起的qP和qSV波变化趋势相同,而SH波与它们呈现相反的变化规律.本研究为从常Q模型角度分析地震波在衰减各向异性黏弹性介质中的传播特征奠定了理论基础.

     

超声波测风仪设计中几个问题的探讨

通过比较Gill仪器的Winsonic 2D测风仪和螺旋浆式风速风向计05103L的实测效果,分析了超声波测风仪测风的特点.进而分析了几种超声波测风的检测机理、系统组成和设计的注意事项;同时探讨了如何解决超声波测风仪目前使用中存在的一些问题(如:全天候使用、环境影响补偿等).最后讨论了超声波的传输特性和大气中的杂质对风速、风向测量的影响.