多通道瞬变电磁法频率域比值算法及视电阻率计算研究

视电阻率在电磁法勘探中起重要作用,可以作为初步解释结果,多通道瞬变电磁法通过大地脉冲响应的峰值时刻定义视电阻率.鉴于传统方法计算峰值时刻视电阻率需要恢复完整大地脉冲响应,本文通过研究大地脉冲响应及其频谱特征,提出一种新的频率域比值法.利用参考谱及其与一般谱的伸缩因子计算一般谱的峰值时刻,进而得到视电阻率.该方法只需大地脉冲响应单个频点幅度谱,从而不用估计整个大地脉冲响应.实际计算时,可以用大地脉冲响应多个频点幅度谱得到平均视电阻率.模拟数据与实测数据结果表明,在一维介质中,频率域比值法可以得到合理的视电阻率.     

南海北部地震危险性分析

在建立了比较可靠的南海北部地震目录以后,采用编制中国地震动参数区划图（2001）的方法,重新划分了南海北部海域的潜在震源区和调整了相关的地球物理参数,最终计算了南海北部海域50年超越概率10％的地震动峰值加速度。南海北部的地震动峰值加速度可分成东部高值区和西部低值区。东区的地震动峰值加速度在0．160g以上,西区大部分海域的地震动峰值加速度小于0．114g,并且与它们北侧的陆区大致相似。     

中国东北及邻区竖直向地震动强度包络函数参数的确定及其衰减关系

选用2008—2019年中国东北及邻区27次地震竖直向105条强震动记录,以三段式强度包络函数模型为目标,利用加权最小二乘回归方法,尝试建立了东北及邻区竖直向地震动时程强度包络函数参数的衰减公式,以使我国的地震动区域划分更具有普遍性。同以往的研究类似,上升段持时t₁和平稳段持时t_s的确定方法采用了70%能量持时法。所选地震的震级为3.3—5.8级,最大震中距为371 km。基于土层场地的竖直向记录,通过与我国目前常用的时程强度包络函数参数的衰减关系进行对比分析发现,t₁与震级之间有明显的相关性,实际应用中应考虑震级对t₁的影响;地震整体持时较短造成t_s上升趋势随距离的增加而变缓;下降段由衰减系数c的变化可见,记录整体衰减较快。     

2012年唐山4.8级地震强震动记录特征及场地相关特性分析

2012年5月28日河北省唐山市古冶区与滦县交界发生4.8级地震, 国家强震动台网中心在河北、 天津和北京的94个强震动台站记录到了本次地震的加速度。 本文给出了获取记录的强震动台站分布及强震动记录结果, 统计了强震动记录数量随震中距的变化, 给出了3个较小震中距台站记录到的加速度时程; 绘制了空间地震动峰值加速度等值线图及周期0.2 s、 2.0 s加速度反应谱值的等值线, 发现峰值加速度等值线与长周期加速度反应谱等值线极值分布具有明显地域差异, 分析认为是由于厚沉积层对长周期地震动具有放大作用造成的。 通过强震动记录与适用于本区的三个衰减关系对比, 分析了此次地震的峰值加速度衰减特征, 同时研究了周期0.2 s、 2.0 s加速度反应谱值的衰减特征, 周期2.0 s反应谱值随震中距的衰减与衰减关系能较好地对应, 然而在震中距100～130 km沉积层较厚的集中地区, 表现出了实际记录较衰减关系值偏大的现象, 认为同样是由于厚沉积层对地震动加速度反应谱长周期的放大作用导致的。 研究了震中距差别不大的情况下, 场地类型与沉积层厚度对反应谱特征周期的影响, 对比基岩台站与软弱地基土层台站的强震动记录反应谱, 发现软弱土层台站的土层对地震动有一定的放大作用, 导致中长周期地震动被放大, 对比位于沉积层较薄的隆起区台站与位于沉积层较厚的凹陷区台站强震动记录反应谱, 发现厚的沉积层不仅对反应谱长周期有放大的作用, 同时也会使得反应谱特征周期值变大。     

Optimal design of SDOF envelope systems for the responses of MDOF dynamic systems

The concept of envelope system for a given dynamic system is proposed in this paper which refers to those systems whose module of transfer function in the whole range of frequency domain is always bigger than that of a given system. This concept opens a new way to study the problems of robust design and modelling for dynamic systems. The condition that an envelope system has to satisfy is rendered as the determination of the positiveness of a real polynomial function and Sturm's sequence method is used to establish an easily implemented criterion for evaluating the positiveness of the polynomial in terms of its coefficients. The optimization for the envelope system is expressed as the minimization of the 2-norm of its transfer function and simplex method is employed to search for the optimal solution. Two dynamic systems are used to illustrate the optimal design for the envelope systems of some of their responses. © 1998 John Wiley & Sons, Ltd.     

A modified method to estimate chain inverse catenary profile in clay based on chain equation and chain yield envelope

Offshore floating facilities are fixed by anchoring systems embedded in seabed soils through chains or ropes. The chain inverse catenary profile embedded in soils influences both the anchor failure mechanism and the anchor holding capacity. The chain mobilizes varying soil normal and tangential resistances during motion, hence it is with difficulty to depict the chain profile. The present work proposed a modified method to estimate the chain inverse catenary profile with high accuracy based on the chain equations and the chain yield envelope. A testing arrangement with three load cells and two MEMS (Micro-electromechanical systems) accelerometers included was designed in model tests. By model tests, the loading combinations of the soil tangential and normal resistances on the chain were obtained and the yield envelopes for both chain and rope were determined. In addition, supplemental model tests were performed to validate the modified method proposed in this study, and the testing results indicated that the estimated chain inverse catenary profile was in good agreement with the actual one. Moreover, the testing arrangement is beneficial in investigating the chain-soil-anchor interaction.     

Behavior of drag anchor in clay with linearly increasing shear strength under unidirectional and combined loading

Drag anchor is a widely used economical anchor option for offshore floating structures. The anchor behavior under unidirectional loading and combined loading is important for anchor selection. The anchor behavior under combined loading, characterized by the yield envelope, can also be used for the prediction of anchor installation, which is still an issue in anchor design. However, most existing studies on anchor capacity are for plate anchors which focused only on the anchor pullout capacity in soil with uniform shear strength. The behavior of drag anchor under unidirectional and combined loading in soil with linearly increasing shear strength profile is seldom investigated. The current 2D finite element studies investigate the anchor behavior for a horizontal anchor fluke in clay with linearly increasing shear strength under unidirectional vertical, horizontal and rotational loadings first. Then based on the results of anchor unidirectional loading behavior, the yield envelopes for anchor under combined loading for both shallow and deep embedded flukes are studied. The effect of anchor embedment depth, soil non- homogeneity, soil overburden pressure and the soil/anchor interface breakaway conditions are studied to provide insight for drag anchor design.     

山脊线与坡度和峰值速度放大系数的相关性研究

地形效应是地震工程和地震学的重要研究内容.数值方法是研究地形效应的重要工具.然而以往关于地形特征对地形效应的影响的研究大多是基于二维简单模型.对三维真实地形特征和地震动放大的关系缺乏详细的研究.为了更好地描述三维地形特征,本文将地形用不同的地形特征因子来描述,并用算法将它们从地形数据中提取出来.从而使地形和放大系数的相关性的研究转换为不同地形特征因子和放大系数的相关性的研究上.本文中,我们选择芦山地区作为研究对象,用算法提取出特征因子山脊线和坡度.它们分别表征了山脊形态和山体的陡峭程度.我们又用谱元法分别模拟三种不同主频Ricker子波的地震波在起伏地表和水平地表模型中的传播,并得到了它们各自的峰值速度(PGV)放大系数.通过分析三个主频的PGV放大系数在山脊线上分布,我们发现放大系数幅值在山脊线上分布不均匀.放大系数较高的地方位于山脊线弯曲或宽度发生变化的附近.我们又统计了三个放大系数在滑动平均坡度上分布,并得到了放大系数均值和坡度的正相关曲线.结果表明坡度和放大系数两者在幅值分布上具有正相关性.