History of faulting in the Northern Hastings Block,southern New England Orogen

Brittle failure is common in the Devonian to Permian rocks in the Northern Hastings Block (NHB) and is manifested by faults of different orientation and kinematic histories, but the timing of fault movement is not well defined. In this study, faults in the NHB were analysed with the map pattern of cross-cutting faults used to estimate the relative time of movement and relationship to other faults. We defined five episodes of faulting or fault reactivation that affected the NHB. The Yarras Fault System on the southwestern side of the NHB and the Parrabel Fault and related faults on the eastern side of the NHB are the two major fault systems responsible for transporting and rotating the NHB in the late Carboniferous. Faults on the eastern, northeastern and northern part of Parrabel Dome started and stopped moving after emplacement of the Hastings Block and before the intrusion of the Werrikimbe Triassic granitoids. We suggested that the movement on the major bounding faults is related to the accommodation of the NHB to the folding and cleavage development in the adjoining Nambucca Block, and is associated with the earliest part of the Hunter–Bowen Orogeny. Limited dextral movement on the extensions of the Taylors Arm Fault System caused minor displacements in the northeastern part of the NHB during the Late Triassic. Some small faults cut the Triassic granitoids or Triassic Lorne Basin sediments indicating tectonic activity continued post-Triassic.     

The Mesozoic structural evolution of the Gorgon Platform,North Carnarvon Basin,Australia

The Gorgon Platform is located on the southeastern edge of the Exmouth Plateau in the North Carnarvon Basin, North West Shelf, Australia. A structural analysis using three-dimensional (3D) seismic data has revealed four major sets of extensional faults, namely, (1) the Exmouth Plateau extensional fault system, (2) the basin bounding fault system (Exmouth Plateau–Gorgon Platform Boundary Fault), (3) an intra-rift fault system in the graben between the Exmouth Plateau and the Gorgon Platform and (4) an intra-rift fault system within the graben between the Exmouth Plateau and the Exmouth Sub-basin. Fault throw-length analyses imply that the initial fault segments, which formed the Exmouth Plateau–Gorgon Platform Boundary Fault (EG Boundary Fault), were subsequently connected vertically and laterally by both soft- and hard-linked structures. These major extensional fault systems were controlled by three different extensional events during the Early and Middle Jurassic, Late Jurassic and Early Cretaceous, and illustrate the strong role of structural inheritance in determining fault orientation and linkage. The Lower and Middle Jurassic and Upper Jurassic to Lower Cretaceous syn-kinematic sequences are separated by unconformities.     

CINRAD/SA(B)发射机高压打火组件级故障诊断

新一代天气雷达技术保障中,发射机高压负载打火导致的综合故障的诊断和定位是比较复杂的,具有故障点多、故障涉及组件多、故障修复时间长等特点,是新一代天气雷达故障维修的难点。依据发射机高压控制和监控信号流程,提出了发射机高压打火组件级故障诊断流程。通过发射机组件级故障诊断流程快速修复发射机高压负载打火综合故障过程,表明发射机高压打火组件级故障诊断流程在雷达维修中具有规范化和适用性维修效果,进一步显示出故障分析诊断流程在新一代天气雷达技术保障中的重要作用。     

ZQZ TF型风传感器冻结故障自动检测装置设计

近年来我国大部分地区在冬、春两季多遭受冻雨灾害,自动气象站的风向风速传感器容易因冻结而无法正常工作。针对冻结故障的实时检测问题,本文设计了一种基于ZQZ-TF型风传感器的故障自动检测装置。该装置通过检测风传感器的工作电压和工作电流,实现对传感器实时状态的监控。同时,结合具体的故障诊断算法,能够快速判断风传感器是否被冻结。系统的核心硬件电路、软件算法可分别集成在自动气象站风向风速数据采集电路和嵌入式软件中,具有结构紧凑、操作简单的特点。经验证,该装置能够实时检测风传感器冻结故障,且工作稳定,检测精度高。     

Impact of sub-pixel heterogeneity on modelled brightness temperature for an agricultural region

Knowledge of sub-pixel heterogeneity, particularly at the passive microwave scale, can improve the brightness temperature (and ultimately the soil moisture) estimation. However, the impact of surface heterogeneity (in terms of soil moisture, soil temperature and vegetation water content) on brightness temperature in an agricultural setting is relatively unknown. The Soil Moisture Active Passive Validation Experiment 2012 (SMAPVEX12) provided an opportunity to evaluate sub-pixel heterogeneity at the scale of a Soil Moisture Ocean Salinity (SMOS) or the Soil Moisture Active Passive (SMAP) radiometer footprint using field measured data. The first objective of this study was to determine if accounting for surface heterogeneity reduced the error between estimated brightness temperature (T_b) and T_b measured by SMOS. It was found that when accounting for variation in surface soil moisture, temperature and vegetation water content within the pixel footprint, the error between the modelled T_b and the measured T_b was less than if a homogeneous pixel were modelled. The correlation between the surface parameters and the error associated with not accounting for surface heterogeneity were investigated. It was found that there was low to moderate correlation between the error and the coefficient of variance associated with the measured soil moisture, soil temperature and vegetation volumetric water content during the field campaign. However, it was found that the correlations changed depending on the stage of vegetation growth and the amount of time following a precipitation event. At the start of the field campaign (following a precipitation event), there was strong correlation between the error and all three surface parameters (r ≥ 0.75). Following a precipitation event close to the middle of the field campaign (during which there was rapid growth in vegetation), there was strong correlation between the error and the variability in vegetation water content (r = 0.89), moderate correlation with soil moisture (r = 0.61) and low correlation with soil temperature (r = 0.26).     

Field evidence for normal fault linkage and relay ramp evolution: the Kırkağaç Fault Zone,western Anatolia (Turkey)

Linking of normal faults forms at all scales as a relay ramp during growth stages and represents the most efficient way for faults to lengthen during their progressive formation. Here, I study the linking of normal faulting along the active K?rka?aç Fault Zone within the west Anatolian extensional system to reconstruct fault interaction in time and space using both field- and computer-based data. I find that (i) connecting of the relay zone/ramp occurred with two breaching faults of different generations and that (ii) the propagation was facilitated by the presence of pre-existing structures, inherited from the ?zmir-Bal?kesir transfer zone. Hence, the linkage cannot be compared directly to a simple fault growth model. Therefore, I propose a combined scenario of both hangingwall and footwall fault propagation mechanisms that explain the present-day geometry of the composite fault line. The computer-based analyses show that the approximate slip rate is 0.38 mm/year during the Quaternary, and a NE–SW-directed extension is mainly responsible for the recent faulting along the K?rka?aç Fault Zone. The proposed structural scenario also highlights the active fault termination and should be considered in future seismic hazard assessments for the region that includes densely populated settlements.     

Hydrogen sulfide measurements in air by passive/diffusive samplers and high-frequency analyzer: A critical comparison

In this study, hydrogen sulfide (H₂S) measurements in air carried out using (a) passive/diffusive samplers (Radiello^® traps) and (b) a high-frequency (60 s) real-time analyzer (Thermo^® 450i) were compared in order to evaluate advantages and limitations of the two techniques. Four different sites in urban environments (Florence, Italy) and two volcanic areas characterized by intense degassing of H₂S-rich fluids (Campi Flegrei and Vulcano Island, Italy) were selected for such measurements. The concentrations of H₂S generally varied over 5 orders of magnitude (from 10⁻¹–10³ μg/m³), the H₂S values measured with the Radiello^® traps (H₂S_R) being significantly higher than the average values measured by the Thermo^® 450i during the trap exposure (H₂S_Ta), especially when H₂S was <30 μg/m³. To test the reproducibility of the Radiello^® traps, 8 passive/diffusive samplers were contemporaneously deployed within an 0.2 m² area in an H₂S-contaminated site at Mt. Amiata (Tuscany, Italy), revealing that the precision of the H₂S_R values was ±49%. This large uncertainty, whose cause was not recognizable, is to be added to that related to the environmental conditions (wind speed and direction, humidity, temperature), which are known to strongly affect passive measurements. The Thermo^® 450i analyzer measurements highlighted the occurrence of short-term temporal variations of the H₂S concentrations, with peak values (up to 5732 μg/m³) potentially harmful to the human health. The Radiello^® traps were not able to detect such temporal variability due to their large exposure time. The disagreement between the H₂S_R and H₂S_Ta values poses severe concerns for the selection of an appropriate methodological approach aimed to provide an accurate measurement of this highly toxic air pollutant in compliance with the WHO air quality guidelines. Although passive samplers may offer the opportunity to carry out low-cost preliminary surveys, the use of the high-frequency H₂S analyzer is preferred when an accurate assessment of air quality is required. In fact, the latter provides precise real-time measurements for a reliable estimation of the effective exposure to hazardous H₂S concentrations, giving insights into the mechanisms regulating the dispersion of this air pollutant in relation to the meteorological parameters.     

郯庐断裂带张八岭隆起段晚中生代岩浆岩继承锆石U-Pb年代学:源区属性及构造意义

大别与苏鲁造山带之间的郯庐断裂带张八岭隆起段,构成了华北与扬子板块之间的断裂边界。该边界带的深部结构状态长期以来存在着不同的认识。本文利用张八岭隆起带沿线出露的晚中生代岩浆岩中继承锆石U-Pb年代学信息,结合地球物理资料及Nd、Pb、Hf同位素资料,分析了其深部的岩浆源区属性及结构状态。张八岭隆起带北段晚中生代岩浆岩继承锆石年龄以1.9~2.7Ga为主,最大峰值年龄为2.5Ga;南段继承锆石年龄以2.2~2.6Ga为主,峰值年龄也为2.5Ga;郯庐断裂带庐江段则以含大量新元古代锆石为特征,在0.7Ga形成显著的分布峰值,并有早元古和少量太古代年龄信息。分析结果表明,张八岭隆起带北段的晚中生代岩浆岩源区为华北下地壳,南段的源区兼有华北和扬子陆壳的信息,而更南部庐江段则以扬子地壳源区为特征。电法剖面揭示,郯庐断裂主边界在张八岭隆起带下向南东倾斜,从而深部存在华北地壳;而南部庐江段转变为向北西陡倾,从而深部皆为扬子地壳。郯庐断裂深部产状特征支持其印支期应为斜向汇聚边界。而其中三叠纪继承锆石的缺失指示隆起带上变质岩应为原地岩石,而非来自大别造山带。     

Present-day Block Movement and Fault Activity on the Eastern Margin of the Tibetan Plateau

The geology and tectonics in the eastern margin of Tibetan Plateau are complex. The main tectonic framework is composed of blocks and faults. Using discontinuous global positioning system survey data for 2008–2014, the velocity field for the Eurasia reference framework was obtained. Based on the velocity field, the present-day velocities of the blocks and boundary faults were estimated. The results reveal that the movement rates of the Chuan-Qing, South China, Chuan-Dian and Indo-China blocks are(17.02±0.60) mm/a,(8.77±1.51) mm/a,(13.85±1.31) mm/a and(6.84 ± 0.74) mm/a, respectively, and their movement directions are 99.5°, 120.3°, 142.9° and 153.3°, respectively. All blocks exhibit clockwise rotation. The displacement rates of the Xianshuihe, Longmenshan, Anninghe, Zemuhe, Xiaojiang and Red River faults are(7.30±1.25–8.30±1.26) mm/a,(10.07±0.97–11.79±0.89) mm/a,(0.96±0.74–2.98±1.73) mm/a,(2.03±0.49–3.20±0.73) mm/a,(3.45±0.40–6.02±0.50) mm/a and(6.23±0.56) mm/a, respectively. The Xianshuihe, Anninghe, Zemuhe and Xiaojiang faults show leftlateral strike-slip movement, while the Longmenshan and Red River faults show right-lateral strikeslip. These characteristics of the blocks and faults are related to the particular tectonic location and dynamic mechanism.     

Late-Quaternary Slip Rate and Seismic Activity of the Xianshuihe Fault Zone in Southwest China

The Xianshuihe fault zone is a seismo-genetic fault zone of left-lateral slip in Southwest China. Since 1725, a total of 59 Ms ≥ 5.0 earthquakes have occurred along this fault zone, including 18 Ms 6.0–6.9 and eight Ms ≥ 7.0 earthquakes. The seismic risk of the Xianshuihe fault zone is a large and realistic threat to the western Sichuan economic corridor. Based on previous studies, we carried out field geological survey and remote sensing interpretation in the fault zone. In addition, geophysical surveys, trenching and age-dating were conducted in the key parts to better understand the geometry, spatial distribution and activity of the fault zone. We infer to divide the fault zone into two parts: the northwest part and the southeast part, with total eight segments. Their Late Quaternary slip rates vary in a range of 11.5 mm/a –(3±1) mm/a. The seismic activities of the Xianshuihe fault zone are frequent and strong, periodical, and reoccurred. Combining the spatial and temporal distribution of the historical earthquakes, the seismic hazard of the Xianshuihe fault zone has been predicted by using the relationship between magnitude and frequency of earthquakes caused by different fault segments. The prediction results show that the segment between Daofu and Qianning has a possibility of Ms ≥ 7.0 earthquakes, while the segment between Shimian and Luding is likely to have earthquakes of about Ms 7.0. It is suggested to establish a GPS or In SAR-based real-time monitoring network of surface displacement to cover the Xianshuihe fault zone, and an early warning system of earthquakes and post seismic geohazards to cover the major residential areas.