砂金粒度特性研究

本文介绍砂金粒度分析采用筛析-镜测的联合粒度分析方法,并提出砂金粒度的分级意见。     

A numerical model for shore-normal sediment size variation on a macrotidal beach

This paper describes a computer simulation model which is designed to predict the selective shore-normal sorting of grain sizes in the nearshore environment. The model simulates wave shoaling, wave height attenuation due to frictional losses and breaking, using linear theory up to the break point and a breaker decay model in the surf zone. Peak horizontal orbital velocities at the bed are calculated from Stokes second-order wave theory. The peak onshore and offshore velocities are used with the threshold expression of Komar and Miller (1975) to generate a spatial pattern of size variation of threshold grain diameter along a profile normal to the shore from deep water to the swash zone. The predicted grain size is used in an hydraulic interpretation of grain size distribution on the intertidal profile, based on the hydrodynamic variations over a tidal cycle on a macrotidal beach. The model is successful in predicting the broad pattern of increasing grain size in the onshore direction which has been observed in nature. Comparisons between measured and predicted grain size distributions indicate that the predictions of the model are better than those of previous models, but the model is more successful at predicting sediment size distributions than at predicting mean sizes on a beach profile.     

On the distribution of physical and chemical particle properties in the atmospheric aerosol

Consideration of sources and growth dynamics of aerosols has led to the conclusion that there may be a distribution or variation of chemical composition and physical structure among atmospheric aerosol particles as a function of size, and within a narrow size range as well. A mathematical representation of these particle properties in terms of an additional dimension to the number size distribution is described. Examples of the relevance of this aspect of aerosol characterization for physical and chemical processes in the atmosphere are discussed. A review of the available techniques shows that several methods are available which can and have provided quantitative results on the distribution of particle properties. Examples of data from the literature have been selected and are presented as three-dimensional distributions illustrating the wide range of particle properties which may exist in narrow size intervals. An evaluation of these results reiterates the value of taking the distribution of particle properties in the atmosphere into account for sampling and modeling purposes.     

Crystallization of microlites during magma ascent: the fluid mechanics of 1980–1986 eruptions at Mount St Helens

Eruptions of Mount St Helens (Washington, USA) decreased in intensity and explosivity after the main May 18, 1980 eruption. As the post-May 18 eruptions progressed, albitic plagioclase microlites began to appear in the matrix glass, although the bulk composition of erupted products, the phenocryst compositions and magmatic temperatures remained fairly constant. Equilibrium experiments on a Mount St Helens white pumice show that at 160 MPa water pressure and 900°C, conditions deduced for the 8 km deep magma storage zone, the stable plagioclase is An₄₇. The microlites in the natural samples, which are more albitic, had to grow at lower water pressures during ascent. Isothermal decompression experiments reported here demonstrate that a decrease in water pressure from 160 to 2 MPa over four to eight days is capable of producing the albitic groundmass plagioclase and evolved melt compositions observed in post-May 18 1980 dacites. Because groundmass crystallization occurs over a period of days during and after decreases in pressure, microlite crystallization in the Mount St Helens dacites must have occurred during the ascent of each magma batch from a deep reservoir rather than continuously in a shallow holding chamber. This is consistent with data on the kinetics of amphibole breakdown, which require that a significant portion of magma vented in each eruption ascended from a depth of at least 6.5 km (160 MPa water pressure) in a matter of days. The size and shape of the microlite population have not been studied because of the small size of the experimental samples; it is possible that the texture continues to mature long after chemical equilibrium is approached. As the temperature, composition, crystal content and water content of magma in the deep reservoir remained approximately constant from May 1980 to at least March 1982, the spectacular decrease in eruption intensity during this period cannot be attributed to changes in viscosity or density of the magma. Simple fluld mechanical considerations indicate, however, that the observed changes in mass flux of magma can be modelled by a five-fold decrease in conduit radius from 35 to 7 m, produced perhaps by plating of magma along the conduit walls. The decreased ascent rates which accompanied the decrease in conduit radius can explain the change from closed-system to open-system degassing and the shift from explosive to effusive eruptions during 1980.     

中国的地区企业进入与退出关联研究

企业的进入退出存在显著的前后关联,关联机制可以分解为竞争效应与乘数效应。本文探讨了1998-2013年间中国制造业企业的空间格局演化过程,发现地级市尺度的企业动态存在明显的时空关联。16年间,企业动态空间格局发生了剧烈演变,逐渐表现出同类型地区集聚现象。利用差分GMM的动态面板模型验证了企业动态在时间上的前后依赖关系。前期的进入与退出对本期企业动态有不同的影响,竞争效应决定企业的进入,乘数效应决定企业的退出。前期企业动态对后期进入的影响会立即显现出来并随时间衰减,而对退出的影响则存在明显滞后效应,在两年之后达到峰值。同时,产业动态关联机制存在显著的空间差异,其中东部地区显示出更强的竞争效应。不同发展水平的地区应采取差别化的政策来指导地区的产业发展,实现产业更新、结构升级和区域经济的可持续发展。东部地区应建立企业准入门槛,降低低效企业退出壁垒;西部地区应该积极吸引新企业进入,并保护在位企业,防止企业退出导致的连锁性萧条。     

Segmentation of contacting soil particles in images by modified watershed analysis

Image-based soil particle size and shape characterization relies on computer methods to process and analyze the images. For contacting particles spread on a flat surface this requires delineation of particle boundaries through shape-based image segmentation. The traditional method using watershed analysis fails for particles that have constrictions (are peanut-shaped). The oversegmentation interprets such particles as being two, thereby underestimating the long particle dimension by about 50% and overestimating particle sphericity by about a factor of two. This paper presents a solution to the problem of oversegmentation through morphologic reconstruction. The key to this improvement is distinguishing the necks in peanut shaped particles from actual contacts between particles. A parameter α is defined to quantify the necks and contacts. Approximately 220,000 particles in a range of 2.0–35.0 mm having various shapes and angularities were studied to find typical α values for necks and contacts. An algorithm is proposed to correct the oversegmentation based on α. The results show that this improved watershed analysis accurately segments sand particles at contacts while preserving the continuity of peanut shaped particles. Example lab tests demonstrate the significance of the problem and its solution.     

塔克拉玛干沙漠石英氧同位素与粒级关系的研究

沙漠与黄土的物源联系是黄土研究关注的问题之一。石英氧同位素可示踪物源,粒度被用以分析沉积环境,但在沙漠物源研究中将二者结合应用的报道尚不多。本文测定了塔克拉玛干沙漠沙丘沙和沙丘剖面中河湖相沉积物的粒度及不同粒级的石英氧同位素,结果显示:1沙丘沙以极细砂和细砂为主,粉砂和黏土含量很低;河湖相沉积物以粉砂和黏土为主,砂含量低于5%。2各粒级石英δ~(18)OSMOW值介于13.8‰~19.7‰,其中沙丘沙为13.8‰~19.7‰,河湖相沉积物为15.6‰~17.6‰;沙丘沙石英δ~(18)O值随粒级增大未呈现减小趋势,同一粒级石英的δ~(18)O值存在一定变异。3经比较,塔克拉玛干沙漠砂和粉砂粒级的石英δ~(18)O值均高于中国其他沙漠,且20μm的石英δ~(18)O值与黄土高原的马兰黄土、洛川黄土—古土壤序列20μm的石英δ~(18)O值并无显著性差异。     

应用扫描电镜-X射线衍射-电子探针研究北山斑岩铜矿区绢英岩中白色云母的特征

绢英岩化蚀变带是近地表寻找斑岩型铜矿的重要矿物学标志之一。公婆泉和白山堂铜矿是甘肃北山成矿带中典型的斑岩型矿床,本文应用偏光显微镜、扫描电镜、X射线衍射仪和电子探针等技术,研究矿区绢英岩化蚀变带中白色云母的结构与化学特征,探讨其成矿指示意义。结果表明,绢英岩中的云母集合体呈边缘不规则的细小花瓣状、扭折板片状和平直板片状等形态;公婆泉矿区云母晶体化学式中四次配位Si原子数为3.04~3.37,白山堂矿区为3.03~3.35,绢英岩中的白色云母结构为1M型普通绢(白)云母与2M1型热液成因的多硅白云母共存。不同多型的云母具有不同的b0值,二者共存的温度和酸度条件,揭示了斑岩铜矿成矿过程中流体从较高温、强酸性快速向低温、弱酸性演化的现象。     

机载光阵探头探测期间云粒子的破碎

机载光阵探头探测时,云粒子(液态和固态)进入二维光阵探头的采样区前,会因与探头探测臂发生机械碰撞,或者与探头外壳产生的湍流和风切变相互作用而破碎。破碎程度与粒子类型、大小、粒子密度、探头入口设计以及飞行空速等有关。利用2008年7~9月探测飞机(Y-12)在山西省太原地区的航测资料并对飞机采样期间的云粒子破碎现象进行介绍和分析,分析结果表明,粒子到达时间间隔分布具有双模态特征:长时间模态是粒子空间分布的真实结构,短时间模态则是云粒子破碎的结果。提出用粒子到达时间间隔阈值作为粒子破碎的判定标准,给出适用于2008年太原地区航测资料的粒子破碎识别阈值,其中适合于探头云粒子成像仪(CIP)的阈值是2×10-5 s,而探头降水粒子成像仪(PIP)的阈值是1×10-4 s。所提的阈值对于以Y-12为机载探测平台,以CIP和PIP探头为探测仪器所获取的其它航次云微物理图像资料的粒子破碎处理也是有一定的参考使用价值。