装有铅橡胶复合阻尼器结构的减震研究

本文在普通铅芯橡胶垫的基础上,提出了一种新型阻尼器－铅橡胶复合阻尼器,并介绍了其构造与工作原理,建立了铅橡胶复合阻尼器结构的分析模型,并对铅橡胶复合阻尼器的减震效果进行了初步分析。结果表明,铅橡胶复合阻尼器具有很好的减震效果具有广阔的应用前景。     

The importance of energetic particle precipitation on the chemical composition of the middle atmosphere

An assessment is made of the relative contribution of certain classes of energetic particle precipitation to the chemical composition of the middle atmosphere with emphasis placed on the production of odd nitrogen and odd hydrogen species and their subsequent role in the catalytic removal of ozone. Galactic cosmic radiation is an important source of odd nitrogen in the lower stratosphere but since the peak energy deposition occurs below the region where catalytic removal of O₃ is most effective, it is questionable whether this mechanism is important in the overall terrestrial ozone budget. The precipitation of energetic solar protons can periodically produce dramatic enhancement in upper stratospheric NO. The long residence time of NO in this region of the atmosphere, where catalytic interaction with O₃ is also most effective, mandates that this mechanism be included in future modelling of the global distribution of O₃. Throughout the mesosphere the precipitation of energetic electrons from the outer radiation belt (60°70°) can sporadically act as a major local source of odd hydrogen and odd nitrogen leading to observable O₃ depletion. Future satellite studies should be directed at simultaneously measuring the precipitation flux and the concomitant atmosphere modification, and these results should be employed to develop more sophisticated models of this important coupling.     

A Lagrangian stochastic model for the trajectories of particle pairs and its application to the prediction of concentration variance within plant canopies

A simple Lagrangian stochastic model for the trajectories of particle pairs in high Reynolds-number turbulent flows is presented. In this model, the velocities of particle pairs are initially correlated but subsequently each particle moves independently. The independent single-particle trajectories are simulated using Thomson's model [J. Fluid Mech. 180, 529–556, 1987]. This two-particle model exactly satisfies the well-mixed condition for Gaussian turbulence when length scales, characterizing the two-point Eulerian velocity correlation function, vanish. Temperature variances, due to heat released as a passive scalar from an elevated plane source, within a model plant canopy (Coppin et al. Boundary Layer Meteorol. 35, 167–191, 1986) are shown to be well predicted by the model. It is suggested that for strongly inhomogeneous flows, the two-point Eulerian velocity function is of secondary importance in determining the simulated trajectories of particle pairs compared to the importance of ensuring satisfaction of the two-to-one constraint (Borgas and Sawford. J. Fluid Mech. 279, 69–99, 1994); i.e ensuring that one-particle statistics obtained from the two-particle model are the same as those obtained from the corresponding one-particle model. Limitations of this modelling approach are discussed.     

Further discussion on the intercomparison of the trace metal concentrations and particle size of fluvial sediment recovered from two centrifuge systems

A single large volume water sample taken at the mouth of the Upper Rhone River on Lake Geneva was processed directly in parallel through two continuous flow centrifuges, a Westphalia and an Alfa-Laval. Sediment was recovered from the Westphalia, and separately from the bowl and brass core of the Alfa-Laval. The three sediment samples were analyzed for particle size and the following elements: Zn, Cu, Mn, Cr, P, Co, B, V, Be, Sr, Na, Pb, Ni, Ba, Fe, Ca, and Mg. Results indicate that the particle size recovery of both machines is similar when sediment from the brass core and bowl of the Alfa-Laval are combined, and that the recovery for all elements other than Cu, V, B, and Pb are the same when the particle size differences are taken into account. Sediment from the Alfa-Laval brass core is clearly contaminated by Cu, B and is also elevated in V and Pb but not to a significant extent. The sediment recovered from the bowl of the Alfa-Laval is contaminated only with Cu, with a 10 ppm increase over the 52 ppm recovered in the Westphalia sediment. Operating procedures involve the discarding of the brass core sediment and the mixing of the Alfa-Laval bowl sediment with that from the Westphalia. The consequent increase in Cu is estimated at less than 5 ppm or within the confidence level of the analysis. These procedures are recommended to all operators of non modified Alfa-Laval units.     

Sheath effects on DEMETER ion drift measurements

The “Instrument d’Analyse du Plasma” on DEMETER includes an ion drift meter used to measure the direction of the incoming ram plasma ( [Berthelier et al., 2006a] and [Berthelier et al., 2006b]). Given the velocity of the satellite, and expected flow velocities of plasma along DEMETER's orbit, it is estimated that at mid latitudes, the direction of incident plasma as measured by IAP should be within approximately 2° of the ram direction. Yet, significantly larger angular deviations are measured routinely. An important assumption made in the interpretation of onboard instruments, such as IAP, is that neither the spacecraft nor the instrument significantly perturb the plasma that is being measured. In view of the large observed angular deviations, this paper examines the possible effect of the electrostatic sheath surrounding IAP. This is done with the 3D PIC simulation code PTetra. The model uses a full 3D particle in cell code with unstructured tetrahedral mesh capable of accurately representing the satellite geometry. The mesh is also adaptive so as to provide a fine spatial resolution in the vicinity of the particle sensor where it is needed, and a coarse resolution in regions where plasma parameters vary over a longer scale length. Calculation results show that while particle deflection associated with the electrostatic sheath near IAP can account for appreciable angular deflections for representative ionospheric plasmas, they are typically smaller than the ones observed. Additionally, the model is unable to reproduce the latitudinal dependence of the observed large deflection angles. It is concluded that sheath effects may cause appreciable distortions on the IAP type of ion flow meter instruments, and on other particle sensors in general. The larger observed deviations and their latitudinal dependence, however, must be attributable to other physical processes not accounted for in the model.     

基于图像测速的波浪破碎两相速度场测量方案探讨

针对波浪破碎试验中气泡区速度与水体速度无法同时测量的难题,基于实验室条件,搭建了粒子图像测速（PIV）和气泡图像测速（BIV）系统,采用声学多普勒测速仪（ADV）对PIV测量精度和不同场景下BIV测量精度进行了细致的验证,并设计多种试验方案以期实现BIV与PIV的同步耦合测量。试验结果表明,7W激光+后置灯的优化照明方案,其耦合测量的气泡区速度代表参数与标准BIV照明方案的结果误差小于5%,且耦合测量的气泡区下方水质点的速度曲线与标准PIV测量结果吻合,表明该改进方案满足PIV与BIV耦合测量的条件。本文实现的PIV与BIV耦合测量有利于优化测量和分析工作,减小破碎波浪重复生成的影响,有利于提高测量精度,为大范围波浪破碎速度场的快速测量提供了新的方案。     

广西寒露风开始期短期气候预测方法研究

利用1951-2013年广西90个气象观测站气温资料、国家气候中心74项指数和美国National Oceanic and Atmospheric Administration（NOAA）的Climate Prediction Center（CPC）60项指数以及海温和陆地雪盖资料、美国国家冰雪研究中心（NSIDC）的两极海冰资料,使用相关分析方法得到广西寒露风开始期气候影响因子,利用逐步回归和神经网络方法进行寒露风开始期的预测。结果表明：寒露风开始期与前一年9-10月北极海冰面积、当年3月南极海冰面积、前一年6月欧亚雪盖、当年5月北美雪盖、北半球雪盖的相关显著。与前一年9月北半球极涡面积指数、前一年10月亚洲区极涡面积指数、前一年3月热带印度洋海温偶极子等指数相关显著。粒子群-神经网络方法预测误差低于逐步回归方法,预报能力有明显提高。     

岩石颗粒破碎的尺寸效应

固体颗粒破碎强度的尺寸效应是一种普遍存在的现象,冰块、岩石颗粒、陶瓷和混凝土块等的破碎强度都表现出随颗粒直径增加而减小的现象,分形模型为解释固体颗粒破碎强度的尺寸效应提供了可行的方法。本文采用Steacy和Sammis分形模型模拟了岩石颗粒压碎特征,分析岩石颗粒破碎后的颗粒分布规律,给出颗粒破碎分维的确定方法,建立颗粒压碎强度与粒径的理论关系,颗粒破碎强度与颗粒粒径的关系用分维D表示为fdD-3。已有的颗粒破碎分布的数据表明,岩石颗粒破碎的分维大约为2.50～2.60,颗粒破碎强度符合用分维表示的尺寸效应。     

Pore orientation of granular materials during biaxial compression

The local pore spaces in granular materials tend to be aligned parallel to the major principal stress direction upon particle mobilization. Manifestation of this response has been numerically validated in our previous studies with the aid of discrete element method modeling and image processing techniques during creep and shearing. We now extend the modeling of pore geometry, constructed with spherical particles, to assemblies of particle clumps. Two-dimensional simulations are performed for both loose and dense assemblies of spherical particles and particle clumps. Each particle packing is bound by rigid or flexible walls and subjected to biaxial compression and the particle mobilization effect on the evolution of pore orientation is explored. Randomly shaped pores surrounded by adjacent particles are geometrically quantified by Delaunay tessellation and fitted with ellipses. Results show that localization is apparent in dense assemblies, in particular for clumped particle packing, while loose assemblies exhibit diffusive failure. Small pores within well-defined shear bands tend to align either parallel to the direction of the shear band or perpendicular to the major principal stress. On the other hand, small pores within the blocks and large pores have a tendency to become elongate towards the major principal stress direction. This study reveals for the first time that pore orientation is dependent upon particle shape, pore size, and assembly conditions on the pore and global scales.