盐卤硼酸盐化学Ⅹ Ⅹ Ⅴ Ⅱ盐湖卤水酸化过程中硼酸生长速率

本文提出了一种用激光散射跟踪溶液中粒子粒度在不同时间的分布，求取粒子生长速率的简便而可行的方法，得到了大柴旦盐湖卤水在硫酸酸化过程中硼酸晶体的生长速率，并提出解决酸法提础工艺中所得硼酸晶体粒度太小的方法。     

THE FLUCTUATING CHARACTERISTICS OF HYDRODYNAMIC FORCES ON BED PARTICLE

ＴＨＥＦＬＵＣＴＵＡＴＩＮＧＣＨＡＲＡＣＴＥＲＩＳＴＩＣＳＯＦＨＹＤＲＯＤＹＮＡＭＩＣＦＯＲＣＥＳＯＮＢＥＤＰＡＲＴＩＣＬＥ￥ＷＡＮＧＸｉｎｇｋｕｉａｎｄＡＮＦｅｎｇｌｉｎｇ（ＴｈｅＦｉｎａｎｃｅｗａｓＳｕｐｐｏｒｔｅｄｂｙＮａｔｉｏｎａｌＳｃｉｅｎ...     

极隙区粒子和电流的观测和研究

处于高纬向日面的极隙区是太阳风能量、动量和质量可以直接进入地球磁场并到达地球的近地空间的区域。本文简要介绍了极隙区的观测和研究，综述了极隙区的粒子沉降、场向电流、等离子体对流和电离层电流的特征。     

A factor analytic approach to the identification of geomorphic processes from soil particle size characteristics

Q-mode factor analysis of soil particle size data is used to identify the three dominant geomorphic processes responsible for the spatial variability of particle size in a catchment on the basaltic Darling Downs landsurface. Three factors are shown to account for 95 per cent of the textural variability of a suite of transported and sedentary materials. The spatial characteristics of groups of samples associated with the three factors suggests that the three factors are associated with suspended sediment transport and deposition, weathering, and bedload transport and deposition respectively. These interpretations are supported by the detailed graphical analysis of the cumulative particle size curves. The spatially variable influence of the three factors and related processes is given by their respective factor loadings which are mappable for the surface layer materials.     

Approaches for modeling longitudinal dispersion in pore-networks

The purpose of this study is to quantify the dispersivity in the longitudinal direction by upscaling pore scale mixing over a network domain and to verify the dispersivity with that obtained through the more rigorous upscaling technique, the Brownian particle tracking model (BPTM). We model a porous medium with a network of pore-units that are comprised of pore bodies and bonds of finite volume. Such a pore-unit is assumed to be a mixing cell with the steady state flow condition for a single fluid. Dispersivity can be obtained by solving the mixing cell model (MCM) for the concentration in each pore-unit and by averaging the concentrations for a large number of pore units (as a function of time and space). A minimal size of network that ascertains an asymptotic value of dispersivity was determined and verified with large size pore networks. This numerically computed dispersivity is compared with the results from the BPTM for the same porous medium and flow conditions. We show that the dispersivity obtained from the MCM is equally reliable for the heterogeneous pore-networks and can be estimated as a function of pore size heterogeneity. For homogeneous networks with the MCM, the iteration time step plays an important role. On the other hand, for networks with the BPTM, the assumption of intra-bond velocity profile affects the results.     

Pb and Th in settling particles in the western Northwest Pacific Ocean: Particle flux and scavenging

A mooring of three conical time-series sediment traps was deployed at two sites in the western Northwest Pacific Ocean for 9 months. Total mass fluxes and activities of ²¹⁰Pb and ²³⁰Th were determined for the settling particles to elucidate their scavenging and transport processes. Sediment samples also were analyzed for ²¹⁰Pb activities. Total mass fluxes, ²¹⁰Pb fluxes and ²³⁰Th fluxes showed large seasonal variations and their weighted mean fluxes tended to increase with depth, with an especially large increase near-bottom. The ratios of the observed ²¹⁰Pb fluxes to the ²¹⁰Pb deficiency fluxes in the upper traps at the two sites were only 0.02 and 0.12, and were attributable to advective export of ²¹⁰Pb from the surface waters. Those ratios in the near-bottom traps ranged between 1.22 and 2.63. This suggests that these high ratios are due to effective particle scavenging, large lateral ²¹⁰Pb import and input of resuspended particles that have not become incorporated into the sediments. The mean total ²³⁰Th fluxes at the near-bottom traps were 4.2–6.7 times higher than that expected from production in the overlying water column. The ²¹⁰Pb activities in the surficial sediments were much lower than those in the near-bottom traps. The ²¹⁰Pb accumulation rates estimated from the excess ²¹⁰Pb inventory in the sediment column were 40–70% higher than the mean ²¹⁰Pb fluxes at the near-bottom traps. The ratios of the ²¹⁰Pb accumulation rates to the ²¹⁰Pb deficiency fluxes at the near-bottom traps ranged between 2.0 and 3.7. The high fluxes of particulate ²¹⁰Pb and ²³⁰Th at the near-bottom traps reflected a combination of enhanced scavenging of dissolved nuclides and the lateral redistribution of particulate matter by downslope and alongshore transports. However, it was not possible to discriminate among the various processes contributing to high nuclide fluxes.     

Evaluation of the method of collecting suspended sediment from large rivers by discharge-weighted pumping and separation by continuous-flow centrifugation

A method for collecting suspended sediment samples has been developed that pumps a discharge-weighted volume of water from fixed depths at four to 40 locations across a river and separates the suspended sediment in the sample using a continuous-flow centrifuge. The efficacy of the method is evaluated by comparing the particle size distributions of sediment collected by the discharge-weighted pumping method with the particle size distributions of sediment collected by depth integration and separated by gravitational settling. The pumping method was found to undersample the suspended sand sized particles (> 63 μm) but to collect a representative sample of the suspended silt and clay sized particles (< 63 μm). The centrifuge separated the silt and clay sized particles (< 63 μm) into three fractions. Based on the average results of processing 17 samples from the Mississippi River and several of its large tributaries in 1990, about 10% of the silt and clay sized material was trapped in a centrifuge bowl-bottom sealing unit containing the nozzle and consisted of mostly medium and coarse silt from 16 to 63 μm. About 74% was retained on a Teflon liner in the centrifuge bowl and consisted of sizes from 0–1 to 63 μm. About 9% was discharged from the centrifuge in the effluent and was finer than 0–1 μm. About 7% was lost during the processes of removing the wet sediment fractions from the centrifuge, drying and weighing. The success of the discharge-weighted pumping method depends on how homogeneously the silt and clay sized particles (< 63 μm) are distributed in the vertical direction in the river. The degree of homogeneity depends on the composition and degree of aggregation of the suspended sediment particles.     

Salt transport on islands in the Okavango Delta: Numerical investigations

This study uses a numerical model to investigate the groundwater flow and salt transport mechanisms below islands in the Okavango Delta. Continuous evapotranspiration on the islands results in accumulation of solutes and the formation of a saline boundary layer, which may eventually become unstable. A novel Lagrangian method is employed in this study and compared to other numerical methods. The numerical results support the geophysical observations of density fingering on Thata Island. However, the process is slow and it takes some hundreds of years until density fingering is triggered. The results are sensitive to changes of the hydraulic gradient and the evapotranspiration rate. Small changes may lead to different plume developments. Results further demonstrate that density effects may be entirely overridden by lateral flow on islands embedded in a sufficiently high regional hydraulic gradient.     

“资源一号”卫星星内粒子探测器对扰动事件的观测

本文比较了在太阳平静和扰动时期“资源一号”卫星星内粒子探测器对卫星舱内高能粒子的观测结果，发现在平静时期观测结果很好地反映了辐射带高能粒子在该高度上的分布情况.在扰动时期，粒子探测器观测到高能粒子分布出现重大变化，本文进一步讨论了影响高能粒子在近地空间分布的可能因素.     

颗粒破碎对煤矸石渗透性能的影响

采用标准试验方法求得筑坝用煤矸石的最大干密度和相应的最优含水量。试验结果表明,击实作用使煤矸石的粗大颗粒发生破碎,导致其粒度组成改变,颗粒级配进一步趋于良好,有利于碾压密实。当粗粒质量分数大于60%时,煤矸石的破碎程度明显提高。当粗粒质量分数小于40%时,煤矸石的工程特性主要由细颗粒的性质决定。煤矸石的渗透系数和孔隙比之间存在指数关系。随细颗粒含量的增加,煤矸石的渗透性将显著降低。