Study of the liquefaction resistance of a saturated sand reinforced with Geosynthetics

This article presents various tests using a cyclic triaxial instrument, on samples of saturated Hostun RF sand, reinforced with circular sheets of geosynthetic material. Tests performed with different types of geosynthetics of different compressibility, rigidity and roughness characteristics indicate a significant increase in liquefaction resistance for samples reinforced with compressible, non-woven geotextiles. The undrained behaviour of saturated Hostun RF sand reinforced with non-woven geotextiles is analysed on the basis of different test series. This analysis highlights the influence of reinforcement compressibility on interstitial pressure distribution in the sample, thus showing the role of this type of inclusion in the increase in liquefaction resistance.     

珊瑚礁工程地质研究的内容和方法

珊瑚礁工程地质研究的主要内容为珊瑚礁自然地质条件、珊瑚礁岩土物理力学性质和珊瑚礁混凝土料问题。除了通常的工程地质研究方法外, 着重介绍珊瑚礁工程地质研究的钻探、触探和地球物理勘测方法。     

榆林风沙滩区水资源可持续利用对策与建议

本文在对榆林风沙滩区内水资源条件、开发利用现状及存在问题等调查研究资料进行深入分析的基础上,结合国民经济各业未来发展对水资源的需求情况,确定了未来不同水平年的需水量和供水量,并通过供需平衡分析,提出了解决水资源短缺的途径和实现水资源合理开发利用的建议.     

A model for grain-size sorting over tidal sand ridges

A model was developed and analyzed to quantify the effect of graded sediment on the formation of tidal sand ridges. Field data reveal coarse (fine) sediment at the crests (in the troughs), but often phase shifts between the mean grain-size distribution and the bottom topography occur. Following earlier work, this study is based on a linear stability analysis of a basic state with respect to small bottom perturbations. The basic state describes an alongshore tidal current on a coastal shelf. Sediment is transported as bed load and dynamic hiding effects are accounted for. A one-layer model for the bed evolution is used and two grain size classes (fine and coarse sand) are considered. Results indicate an increase in growth and migration rates of tidal sand ridges for a bimodal mixture, whilst the wavelength of the ridges remains unchanged. A symmetrical externally forced tidal current results in a grain-size distribution which is in phase with the ridges. Incorporation of an additional external M₄ tidal constituent or a steady current results in a phase shift between the grain-size distribution and ridge topography. These results show a general agreement with observations. The physical mechanism responsible for the observed grain-size distribution over the ridges is also discussed.Responsible Editor: Jens Kappenberg     

Comparison of hydraulic geometry between sand‐ and gravel‐bed rivers in relation to channel pattern discrimination

A comparison has been made between the hydraulic geometry of sand‐ and gravel‐bed rivers, based on data from alluvial rivers around the world. The results indicate a signi?cant difference in hydraulic geometry among sand‐ and gravel‐bed rivers with different channel patterns. On this basis, some diagrams for discrimination of meandering and braided channel patterns have been established. The relationships between channel width and water discharge, between channel depth and water discharge, between width–depth ratio and water discharge and between channel slope and water discharge can all be used for channel pattern discrimination. The relationship between channel width and channel depth can also be used for channel pattern discrimination. However, the accuracy of these relationships for channel pattern discrimination varies, and the depth–discharge relationship is a better discriminator of pattern type than the classic slope–discharge function. The cause for this difference has been explained qualitatively. To predict the development of channel patterns under different natural conditions, the pattern discriminator should be searched on the basis of independent or at least semi‐independent variables. The relationship between stream power and bed material grain size can be used to discriminate channel patterns, which shows a better result than the discriminator using the slope–discharge relationship. Copyright © 2004 John Wiley & Sons, Ltd.     

Modelling transverse dunes

Transverse dunes appear in regions of mainly unidirectional wind and high sand availability. A dune model is extended to two‐dimensional calculation of the shear stress. It is applied to simulate dynamics and morphology of three‐dimensional transverse dunes. In the simulations they seem to reach translational invariance and do not stop growing. Hence, simulations of two‐dimensional dune ?elds have been performed. Characteristic laws were found for the time evolution of transverse dunes. Bagnold's law of the dune velocity is modi?ed and reproduced. The interaction between transverse dunes led to the interesting conclusion that small dunes can travel over bigger ones. Copyright © 2004 John Wiley & Sons, Ltd.     

沈阳地区沙尘天气分析

本文总结了沈阳地区沙尘天气的时空分布特点，从天气条件、地表自然条件(沙源)两方面分析了沈阳地区沙尘天气的成因，总结了沈阳地区预报沙尘天气时应参考的5个因素。     

草炭土路基处理方法研究

为选择合适的草炭土路基处理方法，通过理论分析，对工程实例中遇到的草炭土路基，拟定塑料排水板法和砂桩挤密法处理措施，并对两种方法的处理效果进行了对比。研究结果表明砂桩挤密法无论是从提高固结度，加快草炭土路基固结，还是减小工后沉降，保证路基运营稳定方面都要优于塑料排水板法。砂桩挤密法更适用于草炭土路基处理。     

Seismic horizontal pullout capacity of shallow vertical anchors in sand

The concept of the equivalent free surface has been extended to determine the seismic horizontal pullout capacity of shallow vertical strip plate anchors buried in sand. The analysis has been done rigorously by using the method of stress characteristics. The results have been expressed in the form of non-dimensional charts. The pullout resistance has been found to reduce quite extensively with increase in the magnitude of horizontal earthquake acceleration. The results were compared with the previously published data, and it was seen that the computed pullout resistance with the proposed method was found to be lowest. This revised version was published online in July 2006 with corrections to the Cover Date.     

Evaluating accuracy for two empirical methods in predicting settlement of drilled shafts

Several theoretical, empirical and semi-empirical methods are available in the literature to predict settlement of drilled shafts in sandy soils. In the Arabian Gulf countries, specifically in the United Arab Emirates, equations and procedure from the rest of the world are being used in analysis and design of drilled shafts without proper validation. It is the aim of this study to assess the applicability and evaluate the accuracy of two well known, and commonly used methods for pile prediction in the United Arab Emirates (UAE), namely Vesic (1977) and Poulos (1979), via comparison with data from field pile load tests conducted on shafts drilled in the region. Some of these tests were conducted for the purpose of this study, while others were made available through the courtesy of International Piling Contractors who are active in the region (e.g. Bauer International and Swiss Borings). Pile load test data were analyzed to back-calculate the model parameters related to settlement under different loading stages. Geological data and soil properties were obtained from studies conducted at the relevant sites. An effort is made to correlate soil properties with the prediction models. Statistical analysis is conducted to assess the accuracy of the results obtained from the two methods at different stages of loading via those obtained from pile load tests. Moreover, a detailed parametric study is conducted to assess the effect of the related parameters on the predicted pile settlement and the estimated settlement at different stages of loading. The study concluded with a recommendation of the most appropriate models and procedures to be followed for predicting the settlement of drilled shafts in the UAE, together with useful charts and correlation relations. Results showed that settlement values predicted by Vesic (1977) and Poulos (1979) overestimates the true values. This revised version was published online in July 2006 with corrections to the Cover Date.