Cenozoic paleo-environmental evolution of the Pamir–Tien Shan convergence zone

The retreat of the Tethys Sea and the uplift of the Tibetan Plateau play the critical roles in driving Asian climatic changes during the Cenozoic. In the Pamir–Tien Shan convergence zone, over 3000 m of Cenozoic successions, consisting of marine deposits in the lower, continental clay and fine sand in the middle, and molasse in the upper part, record the evolution of the Tethys Sea, the Asian aridification, and the deformation of the Pamir. In this work, the existing biostratigraphic subdivisions and new electronic spinning resonance dating results were used to assign ages to formations within the Ulugqat section. Sedimentary facies analysis and multi-proxy indices were used to reconstruct the paleo-environmental evolution. The results show: (1) the Pamir–Tien Shan convergence zone has undergone progressive environmental changes from shallow marine before ∼34 Ma to arid land at ∼23 Ma and finally to inter-mountain basin by ∼5.3 Ma; (2) the overall increase in mean size of grains, decrease in redness, in magnetic susceptibility, and in proportion of the ultrafine component of the sediments studied revealed a long-term strengthening in potential energy to transporting medium, cooling, and enhanced continental aridity, respectively; (3) the easternmost edge of the Tethys Sea prevailed in the western Tarim Basin from late Cretaceous to early Cenozoic, and finally retreated from this region around the Eocene–Oligocene transition, which in turn strengthened the Asian aridification; (4) accumulation of molasse with an upper age of ∼1 Ma suggests that the deformation front of the Pamir migrated to this area at or before that time.     

Re-examining urban region and inferring regional function based on spatial–temporal interaction

Urban system is shaped by the interactions between different regions and regions planned by the government, then reshaped by human activities and residents’ needs. Understanding the changes of regional structure and dynamics of city function based on the residents’ movement demand are important to evaluate and adjust the planning and management of urban services and internal structures. This paper constructed a probabilistic factor model on the basis of probabilistic latent semantic analysis and tensor decomposition, for purpose of understanding the higher order interactive population mobility and its impact on urban structure changes. First, a four-dimensional tensor of time (T)?×?week (W)?×?origin (O)?×?destination (D) was constructed to identify the day-to-day activities in three time modes and weekly regularity of weekday/weekend pattern. Then we reclassified the urban regions based on the space clustering formed by the space factor matrix and core tensor. Finally, we further analysed the space–time interaction on different time scales to deduce the actual function and connection strength of each region. Our research shows that the application of individual-based spatial–temporal data in human mobility and space–time interaction study can help to analyse urban spatial structure and understand the actual regional function from a new perspective.     

Evaluation of active and passive seismic earth pressures considering internal friction and cohesion

The Log-Spiral-Rankine (LSR) model, which is a generalized formulation for assessing the active and passive seismic earth pressures considering the internal friction and cohesion of backfill soil, is reviewed and improved in this study. System inconsistencies in the LSR model are identified, which result from an inaccurate assumption on the vertical normal stress field (σ_z=γz) in a general c–ϕ soil medium, and from omitting the effect of soil cohesion when solving for the stress states along the failure surface. The remedies to the said inconsistencies are presented, and local and global iteration schemes are introduced to solve the resulting highly coupled multivariate nonlinear system of equations. The modified LSR model provides a more complete and accurate solution for earth retaining systems, including the geometry of the mobilized soil body, the stress state along the failure surface, as well as the magnitude and the point of application of the resultant earth thrust.     

Space,time, and situational awareness in natural hazards: a case study of Hurricane Sandy with social media data

ABSTRACT

Various methods have been developed to investigate the geospatial information, temporal component, and message content in disaster-related social media data to enrich human-centric information for situational awareness. However, few studies have simultaneously analyzed these three dimensions (i.e. space, time, and content). With an attempt to bring a space–time perspective into situational awareness, this study develops a novel approach to integrate space, time, and content dimensions in social media data and enable a space–time analysis of detailed social responses to a natural disaster. Using Markov transition probability matrix and location quotient, we analyzed the Hurricane Sandy tweets in New York City and explored how people’s conversational topics changed across space and over time. Our approach offers potential to facilitate efficient policy/decision-making and rapid response in mitigations of damages caused by natural disasters.     

Yield–reliability analysis for rural domestic water supply from combined rainwater harvesting and run-of-river abstraction

Abstract

In many rural areas, reticulated water supply from large water resources schemes does not exist and many households obtain water from groundwater (GW), rainwater harvesting (RWH), run-of-river (ROR) flow, or combinations of these. While comprehensive yield–reliability analysis for large water resource systems is the norm, typical rural water supply analysis unrealistically aggregates data into monthly or annual time steps and does not incorporate reliability. A daily time-step simulation of household supply and frequency analysis of the number of days supplied in each year is used herein to: (a) demonstrate a realistic approach of yield–reliability analysis for RWH, ROR and combined RWH and ROR supply; and (b) show how combined utilization of the two can lead to improved supply. Integration of RWH and ROR supply has been found to improve yield and reliability substantially. The limitations of using the simpler mass curve analysis and the effect of applying a monthly time step are demonstrated.

Citation Ndiritu, J., Odiyo, J. O., Makungo, R., Ntuli, C. & Mwaka, B. (2011) Yield–reliability analysis for rural domestic water supply from combined rainwater harvesting and run-of-river abstraction. Hydrol. Sci. J. 56(2), 238–248.     

Chemical composition of rock-forming minerals in granitoids associated with Au–Bi–Cu,Cu–Mo,and Au–Ag mineralization at the Freegold Mountain,Yukon, Canada: magmatic and hydrothermal fluid chemistry and petrogenetic implications

The chemical compositions of rock-forming minerals have been determined for both altered and least-altered igneous rocks spatially associated with numerous mineralized zones (Nucleus Au–Bi–Cu–As deposit, Revenue Au ± Cu and Stoddart Cu–Mo ± W mineral occurrences, and Laforma Au–Ag deposit) across the Freegold Mountain area, Yukon, Canada. Within the study area, K-feldspar has a narrow compositional range (89.4–91% Or), whereas plagioclase spans a wide range (4.4–70.07% An). In all of the investigated samples, T _Ab = T _An = T _Or, suggesting that magmatic equilibrium between the coexisting plagioclase and K-feldspar was maintained. Igneous amphibole phenocrysts from hypabyssal dikes are typically calcic, whereas the Stoddart Cu–Mo ± W, Laforma Au–Ag, and Goldy Au mineralization are associated with Mg-enriched primary amphibole of edenite composition, and Au–Bi–Cu–As mineralization from Nucleus is related to Al-enriched primary amphibole of ferropargasite composition. Primary biotite phenocrysts across the Freegold Mountain area re-equilibrated with oxidized magma (f(O₂) values between 10–13 and 10–11.5 bars, lying between the Ni/NiO and the magnetite/haematite buffers). However, biotite and amphibole phenocrysts from Stoddart, Goldy, Laforma, and the Highway zones crystallized from a more oxidized magma, as indicated by their elevated X _Mg up to 0.65, relative to biotite and hornblende from Nucleus and Revenue characterized by a lower X _Mg (typically < 0.50). This suggests that various sources and (or) rapid emplacement were involved in magma genesis, as further supported by the considerable variation of pressure (1.8–7.3 kb) of amphibole crystallization and of the total Al content in least-altered biotite (2.6–2.9 afu) within the Freegold Mountain area. Biotite and apatite equilibrated within the T range of 520–780°C, consistent with temperatures of equilibration between ilmenite and magnetite, and their compositions indicate that they formed from an oxidized I-type magma. Magma differentiated by fractional crystallization (indicated by the presence of normally zoned plagioclase with Ca-rich cores and Na-enriched outer rims) and multiple magma mixing (supported by the presence of reversed zoned plagioclase and coexistence of normally and reversely zoned plagioclase). Lower X _Mg biotite associated with the mineralized (Cu–Mo ± W) potassic alteration incorporated more F and Cl relative to least-altered biotite with higher X _Mg. In both Nucleus and Revenue Au–Cu mineralizations, secondary biotite composition varies with respect to the associated alteration mineral assemblages. Although secondary biotite in the skarn re-equilibrated with F-poor fluids, secondary biotite from the pervasive biotitization is related to F- and Cl-enriched fluids, and secondary biotite from the phyllitic zone is related to F-, Cl-, and Mg-depleted fluids, thus consistent with a change in mineralizing fluid composition during mineralization.     

Holocene volcanic activity in Anjouan Island (Comoros archipelago) revealed by new Cassignol-Gillot groundmass K–Ar and 14C ages

The Comoros archipelago has attracted renewed attention since 2018 due to the submarine volcano growing east of the island of Mayotte and the associated ongoing seismic crisis. However, the origin of Comorian magmatism remains controversial, as it is either interpreted as related to a hotspot trail, to a fracture zone, or to a plate boundary. Lying in the central part of the archipelago, Anjouan is a key island to better understand the relationship between volcanism and geodynamics. Together with a careful selection of published whole-rock K–Ar ages, our new set of 13 groundmass K–Ar ages on lava flows and one radiocarbon age on a charcoal from a strombolian deposit, allow us to reassess the volcano-tectonic evolution of Anjouan Island. New groundmass K–Ar ages lie within the last 1 Ma, i.e. from 899 ± 14 to 11 ± 1 ka. They suggest that most of the subaerial volcanism in Anjouan is much younger than previously inferred, and occurred as pulses at 900–750 ka, perhaps 530 ka, 230–290 ka, and since 60 ka, with erosional periods in between. Among our new data, one ¹⁴C age of 7513–7089 yrs calBCE (9.3 ± 0.2 ka) and five K–Ar ages younger than 60 ka show that recent volcanism occurred in Anjouan. Moreover, the concentration of eruptive vents along a N150° alignment, parallel to the maximum horizontal stress, suggests a strong link between regional tectonics and volcanism. Considering the presence of active volcanoes on both the western and eastern extremities of the Comoros archipelago, our discovery of Holocene activity on Anjouan provides strong arguments against a chronological progression of volcanism along the archipelago, and therefore contradicts the hotspot hypothesis for the origin of volcanism.Finally, this study provides a robust geochronological timeframe of the different volcanic stages of Anjouan. It demonstrates that Anjouan is an active island and suggests that volcanism and tectonics can both resume at any time.     

利用水汽总量资料诊断入梅时间的方法

梅雨期是江淮流域从春季到夏季一个重要的过渡时期。传统诊断入梅的方法主要根据雨日和温度及副热带高压位置等来确定。由于雨日的不连续, 天气形势的多变, 常会引起诊断入梅日期的分歧。利用长江三角洲地区地基GPS网所反演的连续的大气水汽总量 (GPS/PWV) 资料详细分析了长江三角洲地区2002—2005年入梅情况, 发现GPS/PWV资料可以反映出入梅前后大气中水汽发生显著季节性跳跃的特征, 总结出利用大气中水汽变化特征来诊断入梅时间的方法 (PWV方法)。采用1980—2000年的历史探空资料计算的大气水汽总量 (PWV) 资料, 对该方法进行了检验:21年中有13年的入梅日期与历史上传统方法诊断的入梅日期相吻合; 对两种方法诊断的入梅日期相差较大的3年的入梅情况进行的分析表明, PWV方法诊断出的入梅日比原定入梅日更合理。该方法在2006年入梅诊断的应用也得到验证。     

Arsenic accumulation in the roots of Helianthus annuus and Zea mays by irrigation with arsenic-rich groundwater: Insights from synchrotron X-ray fluorescence imaging

The aim of this study was to investigate the accumulation of arsenic (As) in and on roots of Zea mays (maize) and Helianthus annuus (sunflower) by means of synchrotron-based micro-focused X-ray fluorescence imaging (μ-XRF). Plant and soil samples were collected from two field sites in the Hetao Plain (Inner Mongolia, China) which have been regularly irrigated with As-rich groundwater. Detailed μ-XRF element distribution maps were generated at the Fluo-beamline of the Anka synchrotron facility (Karlsruhe Institute of Technology) to assess the spatial distribution of As in thin sections of plant roots and soil particles. The results showed that average As concentrations in the roots (14.5–27.4 mg kg⁻¹) covered a similar range as in the surrounding soil, but local maximum root As concentrations reached up to 424 mg kg⁻¹ (H. annuus) and 1280 mg kg⁻¹ (Z. mays), respectively. Importantly, the results revealed that As had mainly accumulated at the outer rhizodermis along with iron (Fe). We therefore conclude that thin crusts of Fe-(hydr)oxides cover the roots and act as an effective barrier to As, similar to the formation of Fe plaque in rice roots. In contrast to permanently flooded rice paddy fields, regular flood irrigation results in variable redox conditions within the silty and loamy soils at our study site and fosters the formation of Fe-(hydr)oxide plaque on the root surfaces.     

CFD modelling of a small–scale fixed multi–chamber OWC device

Wave Energy Converters (WECs) have excellent potential as a source of renewable energy that is yet to be commercially realised. Recent attention has focused on the installation of Oscillating Water Column (OWC) devices as a part of harbor walls to provide advantages of cost–sharing structures and proximity of power generation facilities to existing infrastructure. In this paper, an incompressible three–dimensional CFD model is constructed to simulate a fixed Multi–Chamber OWC (MC–OWC) device. The CFD model is validated; the simulation results are found to be in good agreement with experimental results obtained from a scale physical model tested in a wave tank. The validated CFD model is then used for a benchmark study of 96 numerical tests. These investigate the effects of the PTO damping caused by the power take–off (PTO) system on device performance. The performance is assessed for a range of regular wave heights and periods. The results demonstrate that a PTO system with an intermediate damping can be used for all chambers in the MC–OWC device for most wave period ranges, except for the long wave periods. These require a higher PTO damping. An increased incident wave height reduces the device capture width ratio, but there is a noticeable improvement for long wave periods.