村镇空间结构特征分析

以平原村镇香河县、山地村镇密云县和水乡村镇昆山市为研究区, 分析了村镇空间结构的特征。建立基于网格的村镇选址及空间范围模型, 采用GIS空间分析和建模技术实现; 此外, 空间范围模型根据泰森多边形模型的思想, 提出用土地效益的概念代替距离来确定村镇的空间范围。由于考虑因素更全面, 更具体, 这两个模型可以更好地为村镇的选址与空间范围的确定提供参考。此研究为村镇规划工作提供帮助。     

混合式全球网格划分方法及编码研究

根据基于多面体剖分的球面网格划分方案和基于地理坐标的等间隔网格划分方案的优缺点及地图投影的特点,提出了一种混合式全球网格划分方法。这种划分方法将全球分成了六个面片,每个面片的每一边都是90°,其中四个面片处于南北纬45°之间,以等距离圆柱投影为基础,采用矩形网格覆盖;两个面片处于高纬地区,以极地正方形变换为基础,采用不规则四边形网格覆盖。详细地阐述了网格的编码策略及存储方式,并给出了网格编码与地理坐标之间的相互转换方法。     

无人机倾斜摄影与LiDAR融合监测技术

本文以成都市环城生态区生态修复项目为依托,利用飞马D200无人机实现了倾斜摄影和LiDAR技术的融合监测,通过三维模型制作、大比例尺地形图生产、点云处理、方格网计算、精度评定等步骤,验证了倾斜摄影和机载LiDAR协同监测方式可以满足1∶500地形图和方格网测量的精度,对后期无人机测绘实际生产具有指导意义。     

一种基于信息网格的空间数据分解算法

针对空间数据库数据海量且分布的特点,为了能从这些空间数据中更加有效的收集信息和发现知识,介绍了基于信息网格的空间数据挖掘计算模型,在分析空间数据划分一般原则和方法的基础上,针对该计算模型给出了一个数据划分的初步算法,并通过模拟实验对算法的时间性能进行了评价与分析。     

球面退化四叉树格网的剖分及变形分析

为有效解决经纬度格网与四元三角网(QTM)在全球空间数据管理与操作中存在的不足,提出一种新的全球离散格网剖分方法——球面退化四叉树格网(DQG),给出该格网的剖分原理与编码规则,并对其进行几何变形计算与分析。结果表明:DQG既具有经纬度格网结构简单的特征,又具有QTM几何变形稳定等优点。     

水平分辨率对DEM流域特征提取的影响

选取石质山地与黄土丘陵过渡区宛川河流域作为研究区,利用1∶5万、水平分辨率10~100 m栅格DEM提取流域特征参数进行分析。结果表明:DEM水平分辨率对数字河网的提取精度有影响,提取的流域面积差别很小,河流长度、河道总长、河道坡度以及河网密度有偏差,流域平均坡度变化明显,长度和坡度特征参数的变化导致流域汇流时间及滞时不一致。     

Low-pressure granulite facies metamorphism in the Larsemann Hills area, East Antarctica; petrology and tectonic implications for the evolution of the Prydz Bay area

ABSTRACT Thermobarometric studies on various granulite facies areas along the Prydz Bay coast, East Antarctica (73°-79°E, 68°-70°S), show that, at around 1100 Ma, during a late Proterozoic orogeny, the rocks of the Larsemann Hills suffered a lower pressure metamorphic peak than the surrounding areas. Along the Prydz Bay coast, the rocks affected by this event include parts of the Vestfold Hills block plus all of the Rauer Group, the Larsemann Hills and the Munro Kerr Mountains. The dykes in the south-west corner of the Vestfold Hills were recrystallized during this event with little deformation at temperatures not quite as high as in the areas further south-west (650°C, 6.5 kbar) (Collerson et al., 1983), the Rauer Group was metamorphosed at 800°C and 7.5 kbar (Harley, 1987a), the Larsemann Hills at 750°C and 4.5 kbar, and the Munro Kerr Mountains probably at around 850°C and 5 kbar. Retrograde equilibration in the different areas occurred during decompression to about 10 km depth in all areas, followed by isobaric cooling at this depth. This paper shows that the peak metamorphism in the Larsemann Hills occurred at a pressure which is too low to have been the consequence of thermal relaxation of overthickened crust with normal mantle heat flow. Although other areas in Prydz Bay were metamorphosed at sufficiently high pressures so that their decompression paths are not inconsistent with a continental collision model, the inferred pre-metamorphic peak histories and the requirement of consistency with the Larsemann Hills, make it unlikely that collision followed by erosion-driven decompression is an appropriate model. We suggest that the thermal regime of the crust in the Larsemann Hills region was controlled by a perturbation in the asthenosphere, with magma invasion of the crust. We suggest that the 500 Ma event, represented in Prydz Bay by granitic outcrops at Landing Bluff and by several K/Ar ages from the Larsemann Hills area, was responsible for the final excavation of the terrane.     

我国月降水和气温网格点资料的处理和分析

用逐步搜索逼近法的客观分析技术计算出１９５１－１９９２年中国月降水量和月平均气温的格点资料，并利用图象识别原理对格点值和站点观测值进行了比较。     

An introduction to ultrahigh-pressure metamorphism

Abstract Ultrahigh-pressure (UHP) metamorphism refers to mineralogical and structural readjustment of supracrustal protoliths and associated mafic-ultramafic rocks at mantle pressures greater than ∼ 25 kbar (80-90 km). Typical products include metapelite, quartzite, marble, granulite, eclogite, paragneiss and orthogneiss; minor mafic and ultramafic rocks occur as eclogitic-ultramafic layers or blocks of various dimensions within the supracrustal rocks. For appropriate bulk compositions, metamorphism at great depths produces coesite, microdiamond and other characteristic UHP minerals with unusual compositions. Thus far, at least seven coesite-bearing eclogitic terranes and three diamond-bearing UHP regions have been documented. All lie within major continental collision belts in Eurasia, have similar supracrustal protoliths and metamorphic assemblages, occur in long, discontinuous belts that may extend several hundred kilometers or more, and typically are associated with contemporaneous high-P blueschist belts. This paper defines the P-T regimes of UHP metamorphism and describes mineralogical, petrological and tectonic characteristics for a few representative UHP terranes including the western gneiss region of Norway, the Dora Maira massif of the western Alps, the Dabie Mountains and the Su-Lu region of east-central China, and the Kokchetav massif of the former USSR. Prograde P-T paths for coesite-bearing eclogites require abnormally low geothermal gradients (approximately 7°C/km) that can be accomplished only by subduction of cold, oceanic crust-capped lithosphere ± pelagic sediments or an old, cold continent. The preservation of coesite inclusions in garnet, zircon, omphacite, kyanite and epidote, and microdiamond inclusions in garnet and zircon during exhumation of an UHP terrane requires either an extraordinarily fast rate of denudation (up to 10 cm/year) or continuous refrigeration in an extensional regime (retreating subduction zone).     

Mineral composition variation in Alpine Schist, Southern Alps, New Zealand: Implications for recrystallization and exhumation

Abstract Compositional variation of silicates (plagioclase, K-feldspar, epidote, titanite, garnet, white mica, biotite, chlorite), ilmenite, carbonates (calcite, ankerite) and apatite, in quartzofeldspathic lithologies of the Alpine Schist, New Zealand, is discussed in terms of increasing metamorphic grade and possible isograd-producing reactions. The mineral data, in conjunction with geological considerations, are used to determine polychronous P-T arrays of an early high P/T event (c. 16°C/kb; 5°C/km) overprinted by a lower P/T event (c. 50°C/kb; 15°C/km) that provides an estimation of Mesozoic and Cenozoic exhumation of schist of 11 to 13 km and 19 to 22 km respectively. The effects of possible shear heating and recrystallization to form K-feldspar zone schist near the Alpine Fault is consistent with movement along a mid to lower crustal detachment surface during Cenozoic shortening, and near isothermal exhumation of the schists to form the Southern Alps.