基于矩形网格的有限差分走时计算方法

对于大多数速度场，地震波沿射线传播的初至波走时，可以用有限差分外推的方法在二维或三维数值网格上计算出来. 在保证精度的条件下，为提高计算效率和适应性，本文推导了基于任意矩形网格和局部平面波前近似的有限差分初至波走时计算方法. 另外，该方法对首波和散射波做了合适的处理，而且不会碰到传统射线法存在的阴影区和焦散区等问题. 简单模型和复杂的Marmousi模型试算的结果表明，该方法精度较高并适用于强纵、横向变速的复杂介质. 基于该方法的Kirchhoff叠前深度偏移, 在主要构造和目的层位置的成像效果上基本达到了波动方程法叠前深度偏移的位置成像效果. 由于未考虑续至波等有效能量，在成像的保幅性上不如波动方程法叠前深度偏移的效果，但其计算效率则明显高于全格林函数法和波动方程法.      

新疆西南天山木扎尔特一带低压麻粒岩相变质作用P-T轨迹及其地质意义

本文首次报道在新疆西南天山木扎尔特一带发现了二辉石麻粒岩和麻粒岩相变质的堇青石榴矽线石片麻岩。二辉石麻粒岩的矿物组合为单斜辉石-斜方辉石-黑云母-角闪石-斜长石-石英。堇青石榴矽线石片麻岩矿物组合为堇青石-矽线石-石榴石-黑云母-斜长石-石英。岩石学和矿物学特征表明它们是典型的低压麻粒岩相变质岩石，其变质作用经历了两期演化：a．峰期麻粒岩相变质，T=681～705℃，P=5．4～5．8kbar；b．峰后角闪岩相退变阶段，T：571～637℃．P=4．7～5．3kbar。其变质作用P-T轨迹具有逆时针近等压降温(IBC)的特点，代表该地区可能为塔里木板块向伊犁．中天山板块俯冲过程中，在陆壳一侧所产生的陆源岩浆弧区域，由于受到下部岩浆热源的影响，在拉伸环境下出现低压麻粒岩相变质。通过分析低压麻粒岩相岩石与其南部高压一超高压变质带的大地构造位置和年代关系，我们认为该地区的低压麻粒岩相变质岩石可能与其南部的西天山高压一超高压变质带组成了双变质带。     

大别山太湖地区榴辉岩峰期变质条件与构造意义

大别山太湖地区曾被作为“冷”、“热”榴辉岩带的交界处所在，我们对大别山太湖地区的进行了1：10000地质填图，并详细研究了该地区榴辉岩的岩相学和矿物成分变化，以及KD值、峰期变质P-T条件。研究表明榴辉岩自南向北可分为三类：①朱家冲型榴辉岩；②大坝型榴辉岩；③金河桥型榴辉岩。其中朱家冲型榴辉岩和金河桥型榴辉岩显示出明显的温度、压力差异，它们形成的P-T条件分别为：P=2．14GPa、T=563℃和P=3．76GPa、T=791℃。大坝型榴辉岩的峰期变质P-T条件差别较大，在柯石英-石英相变线附近徘徊，变质环境相当于高压一超高压过渡环境。朱家冲型榴辉岩与大坝型榴辉岩分别对应于前人所划分的“冷”、“热”榴辉岩，并且两者在峰期，变质温、压条件上是连续变化的，没有明显的温、压间断。因此，我们认为本区所谓的“冷”、“热”榴辉岩带界线是不存在的。     

Silica depleted melting of pelites. Petrogenetic grid and application to the Susqueda Aureole, Spain

Metapelitic rocks in the low pressure contact metamorphic aureole around the Susqueda igneous complex, Spain show a number of features that make them an ideal testing ground for the modelling of silica‐undersaturated melting. Rocks in the aureole experienced localized depletion in silica by the segregation of quartz veins during a pre‐anatectic, regional cordierite‐andalusite grade metamorphic event. These rocks were then intruded by gabbroic to dioritic rocks of the Susqueda igneous complex that formed a migmatitic contact metamorphic aureole in the country rocks. This migmatisation event caused quartz‐saturated hornfels and restite formation in rocks that had experienced no quartz vein segregation in the previous regional metamorphic event, but silica‐undersaturated melting in those rocks that were previously depleted in silica. Silica‐undersaturated melting is investigated using a new petrogenetic P–T projection and equilibrium pseudosections calculated in the KFMASH and NCKFMASH systems, respectively. The grid considers quartz absent equilibria and a range of phases that form typically in silica‐undersaturated bulk compositions, for example corundum. It is shown that the quartz‐rich precursors in the Susqueda contact aureole produced about 10% melt during contact metamorphism. However, most of this melt was extracted leaving behind rocks with restitic bulk compositions and minor leucosome segregation. It is suggested that the melt mixed with the host igneous rocks causing an apparent magmatic zoning from diorite in the centre of the complex to tonalite at the margins. In contrast, the quartz‐poor precursors (from which the quartz veins segregated) melted in the silica‐undersaturated field producing a range of assemblages including peritectic corundum and spinel. Melting of the silica‐undersaturated rocks produced only negligible melt and no subsequent melt loss.     

空间信息网格中动态复制策略的研究

空间信息网格项目数据量大，用户遍及各地，对数据文件的请求延时大、占大量带宽。复制可以节省带宽、减少时延、均衡负载、改善系统可靠性。采用动态复制技术可以使用户有效地获得所需的数据。详细地论述了动态复制策略以及空间信息网格中的复制管理机制、复制服务流程和具体实施。     

浅析网格化测量标志巡查信息直报技术

测量标志巡查是加强测量标志管护的重要手段。本文采用网格化理念设计,集成应用网络、智能移动终端、工作流、地图网络化服务等技术提出了一种测量标志巡查信息直报技术,可实现全省测量标志巡查信息的采集、实时在线或事后离线(WIFI等)巡查信息报送、审核、入库、应用等业务的网络化、准实时化、一体化,提高了测量标志巡查工作的科学化和规范化。     

基于等高线隔断线确定DEM适宜分辨率的方法研究

分辨率是等高线数据插值生成格网DEM数据过程中需要考虑的一个重要参数,适宜的分辨率既能将等高线高程信息尽可能保留,又不会因插值造成数据冗余及误差。基于对格网DEM生成方式的理解,提出了等高线隔断线的相关概念,分析了基于地形图矢量化的等高线数据插值生成格网DEM数据,由不同长度等高线隔断线频率统计来确定格网适宜分辨率参考值的方法。同时,不同长度等高线隔断线的长度与其频率相乘得到标准长度,以及等高线隔断线中心点生成的密度分析图,均可在频率特征决定适宜分辨率参考值时起到一定的参考作用。通过样区实验验证,实现简便,可度量性强,与其他相关研究具有一致性,对确定适宜格网分辨率参考值具有一定的借鉴意义。     

基于SDOG-ESSG的地球系统元胞自动机框架及其应用试验

元胞自动机结构简单且具备模拟复杂系统的能力,已被广泛应用于大气、流体力学、地球物理等领域。然而,现有元胞自动机以欧氏空间为约束进行地球系统过程模拟,忽略了地球重力等天然约束,导致计算过程中元胞状态的传递方向与真实运动的趋势方向不相符,一定程度上扭曲了最终的模拟结果。本文提出了地球系统元胞自动机这一概念,并从元胞表达及构建、邻居模型等方面设计了基于SDOG-ESSG格网的地球系统元胞自动机框架。由于演化规则取决于不同的应用,因此本文进一步以地壳的热传递为例,通过对热力学方程离散化设计了相应的演化规则。最后,借助公开的数据源开展了地壳热传递元胞自动机模拟的初步试验,并与一定区域下的数值模拟结果展开了比对。试验表明,与数值模拟方法相比,本文方法的模拟结果相对误差控制在27%以内,具备一定程度的可行性,可作为地球系统过程模拟的一种新思路。     

A hybrid approach to modeling territorial control in violent armed conflicts

Territorial control is central to the understanding of violent armed conflicts, yet reliable and valid measures of this concept do not exist. We argue that geospatial analysis provides an important perspective to measure the concept. In particular, measuring territorial control can be seen as an application of calculating service areas around points of control. The modeling challenge is acute for areas with limited road infrastructure, where no complete network is available to perform the analysis, and movements largely occur off road. We present a new geospatial approach that applies network analysis on a hybrid transportation network with both actual road data and hexagon‐fishnet‐based artificial road data representing on‐road and off‐road movements, respectively. Movement speed or restriction can be readily adjusted using various input data. Simulating off‐road movement with hexagon‐fishnet‐based artificial road data has a number of advantages including scalability to small or large study areas and flexibility to allow all‐directional travel. We apply this method to measuring territorial control of armed groups in Sub‐Saharan Africa where inferior transport infrastructure is the norm. Based on the Uppsala Conflict Data Program's (UCDP) Georeferenced Event Data (GED) as well as spatial data on terrain, population locations, and limited transportation networks, we enhance the delineation of the specific areas directly controlled by each warring party during civil wars within a given travel time.