Martian Topography: Scaling, Craters, and High-Order Statistics

The high-order structure functions of Mars topography reveal three specific ranges of scales: (1) scaling range at small scales where the structure functions exhibit scaling behavior; (2) transition range where the structure functions continue to grow but do not reveal scaling; and (3) saturation range at large scales where the structure functions saturate. The scaling and saturation ranges are explored in detail in respect to scaling and intermittency. Analysis of the Mars Orbiter Laser Altimeter (MOLA) data and computer simulations suggest that there are two potential contributors to the small-scale scaling: (i) scale-invariant surface formation; and (ii) effects of discrete morphological forms such as craters. The crater effect also provides an explanation for the large-scale intermittency revealed using the normalized structure functions within the saturation range, which cannot be explained by the ‘scale-invariant’ concept. Overall, the obtained results suggest that the “crater” contribution to the structure function behavior often dominates over the effect of the scale-invariant surface formation.     

Validating the ability of the discontinuous deformation analysis method to model normal P‐wave propagation across rock fractures

The effects of fractures on wave propagation problems are increasingly abstracting the attention of scholars and engineers in rock engineering field. This study aims to fully validate the ability of discontinuous deformation analysis (DDA) to model normal P‐wave propagation across rock fractures. The effects of a single fracture and multiple parallel fractures are all tested. The results indicate that DDA can accurately reflect the fracture effects, including the fractures stiffness, the fracture spacing and the fracture number, and the effects of incident wave frequency on one‐dimensional P‐wave propagation problems. Thus, DDA is able to deal well with normal incident P‐wave propagation problems. Copyright © 2017 John Wiley & Sons, Ltd.     

Elastic lateral dynamic impedance functions for a rigid cylindrical shell type foundation

Elastic lateral dynamic impedance functions are defined as the ratio of the lateral dynamic force/moment to the corresponding lateral displacement/rotation at the top ending of a foundation at very small strains. Elastic lateral dynamic impedance functions have a defining influence on the natural frequencies of offshore wind turbines supported on cylindrical shell type foundations, such as suction caissons, bucket foundations, and monopiles. This paper considers the coupled horizontal and rocking vibration of a cylindrical shell type foundation embedded in a fully saturated poroelastic seabed in contact with a seawater half‐space. The formulation of the coupled seawater–shell–seabed vibration problem is simplified by treating the shell as a rigid one. The rigid shell vibration problem is approached by the integral equation method using ring‐load Green's functions for a layered seawater‐seabed half‐space. By considering the boundary conditions at the shell–soil interface, the shell vibration problem is reduced to Fredholm integral equations. Through an analysis of the corresponding Cauchy singular equations, the intrinsic singular characteristics of the problem are rendered explicit. With the singularities incorporated into the solution representation, an effective numerical method involving Gauss–Chebyshev method is developed for the governing Fredholm equations. Selected numerical results for the dynamic contact load distributions, displacements of the shell, and lateral dynamic impedance functions are examined for different shell length–radius ratio, poroelastic materials, and frequencies of excitation. Copyright © 2016 John Wiley & Sons, Ltd.     

Geochronological and petrological constraints from the evolution in the Saxon Granulite Massif,Germany, on the Variscan continental collision orogeny

Controversy over the plate tectonic affinity and evolution of the Saxon granulites in a two‐ or multi‐plate setting during inter‐ or intracontinental collision makes the Saxon Granulite Massif a key area for the understanding of the Palaeozoic Variscan orogeny. The massif is a large dome structure in which tectonic slivers of metapelite and metaophiolite units occur along a shear zone separating a diapir‐like body of high‐P granulite below from low‐P metasedimentary rocks above. Each of the upper structural units records a different metamorphic evolution until its assembly with the exhuming granulite body. New age and petrologic data suggest that the metaophiolites developed from early Cambrian protoliths during high‐P amphibolite facies metamorphism in the mid‐ to late‐Devonian and thermal overprinting by the exhuming hot granulite body in the early Carboniferous. A correlation of new Ar–Ar biotite ages with published P–T–t data for the granulites implies that exhumation and cooling of the granulite body occurred at average rates of ~8 mm/year and ~80°C/Ma, with a drop in exhumation rate from ~20 to ~2.5 mm/year and a slight rise in cooling rate between early and late stages of exhumation. A time lag of c. 2 Ma between cooling through the closure temperatures for argon diffusion in hornblende and biotite indicates a cooling rate of 90°C/Ma when all units had assembled into the massif. A two‐plate model of the Variscan orogeny in which the above evolution is related to a short‐lived intra‐Gondwana subduction zone conflicts with the oceanic affinity of the metaophiolites and the timescale of c. 50 Ma for the metamorphism. Alternative models focusing on the internal Variscan belt assume distinctly different material paths through the lower or upper crust for strikingly similar granulite massifs. An earlier proposed model of bilateral subduction below the internal Variscan belt may solve this problem.     

一种精确估计区域北斗接收机硬件延迟的方法

提出了一种精确估计区域北斗接收机硬件延迟(DCB)的方法。该方法不需要传统复杂的电离层模型,在已知一个参考站接收机硬件延迟的条件下,利用正常情况下电离层延迟量和卫星-接收机几何距离强相关这一特点,采用站间单差法来精确估计区域内BDS接收机的硬件延迟。试验结果表明,该方法单站估计的单站北斗接收机连续30d的硬件延迟RMS在0.3ns左右。通过GEO卫星双频观测值扣除已知卫星DCB和本文方法估计的接收机DCB,计算对应穿刺点一天的VTEC并和GIM格网内插结果并进行比对分析,二者大小和变化趋势均符合较好,进一步验证了本文提出的方法具有可靠性。     

Fourier-based multi-scale representation and progressive transmission of cartographic curves on the internet

ABSTRACT

Automatic generation of multi-scale representations from the same spatial data source has been the research focus in map generalization for a long time. Based on the Fourier technique, this paper proposes a continuous, multi-scale representation model for progressive transformation of cartographic curves on the Internet. In our method, all the curves, whether closed or open, are depicted as periodical functions which are further expressed as Fourier series. The convergence degrees of the Fourier series are explored for different kinds of curves, and truncating frequencies are derived based on the similarity between the original and reconstructed curves. Using information theory and the Radical Law in cartography, the relationship between map scales and Fourier frequencies is established. Based on the proposed multi-scale model, we also introduce the principles and implementation of a progressive transmission method. Our method is evaluated using the contours from a topographic map. The results show that our model is a valid approach to multi-scale representation of cartographic curves.     

Effect of sensor modelling methods on computation of 3-D coordinates from Cartosat-1 stereo data

The orbital and the rational polynomial coefficients (RPC) models are the two most commonly used models to compute a three-dimensional coordinates from an image stereo-pair. But it is still confusing that with the identical user provided inputs, which one of these two models provides more accurate digital elevation model (DEM), especially for mountainous terrain. This study aimed to find out the answer by evaluating the impact of used models on the vertical accuracy of DEM extracted from Cartosat-1 stereo data. We used high-accuracy photogrammetric DEM as the reference DEM. Apart from general variations in statistics, surprisingly in a few instances, both the DEMs provided contrasting results, thus proving the significance of this study. The computed root mean square errors and linear error at 90% (LE90) were lower in case of RPC DEM for various classes of slope, aspect and land cover, thus suggesting its better relative accuracy.     

二连盆地与地沥青密切相关的砂岩型铀矿床微观矿物特征及成因分析

内蒙古二连盆地产在下白垩统碎屑岩系中的砂岩型铀矿床,其矿化与地沥青密切相关,有铀矿物存在之处必有地沥青;岩石中也普遍含地沥青。笔者通过蚀刻α径迹示踪,对铀含量在(200~1770)×10~(-6)的碎屑岩进行扫描电镜分析,采用分子量计算方法确定了该地区含铀碎屑岩中的铀是以多种超显微铀矿物形式存在。其中,以赛汉高毕铀矿床为代表,铀主要形成复成分磷钙铀矿。其它铀矿床也普遍有复成分磷钙铀矿产出:巴彦乌拉矿床样品因钙含量低、硅含量高,则铀石多于复成分磷钙铀矿;道尔苏矿床以铀石和磷铀矿为主,有少量沥青铀矿及复成分磷钙铀矿;哈达图矿床主要是沥青铀矿,未见复成分磷钙铀矿。除了地沥青之外,各矿床中与铀矿物共生的主要矿物还有草莓状、鲕粒状黄铁矿。由此推断,铀矿床的可能成因是:来自盆地深部的UH_3、PH_3、CaH_2、SiH_4、FeH_2、H_2S等在伴随油气向上运移过程中,由于温度、压力降低和氧化作用而发生分解及凝聚,形成草莓状、鲕粒状黄铁矿;同时派生出含U、P、Si、Ca等的氧化物的低温热水溶液,并最终结晶析出铀矿物,形成有大量黄铁矿共生的铀矿体;而油气经过长期挥发,最终演变成地沥青,成为铀矿物的载体。     

三江源区大气可降水量时空特征及其与降水关系

利用1979—2016年欧洲中期天气预报中心(ECMWF) ERA-Interim (1°×1°)再分析资料中的经、纬向水汽通量和大气可降水量(precipitation water vapor,PWV)数据,采用相关性分析、趋势分析法、累积距平、IDW等方法,分析三江源地区PWV与水汽通量的时空分布特征、降水转化率(precipitati-on conversion efficiency,PCE)变化规律。结果表明:过去的38 a,经、纬向多年平均水汽通量分别为50. 2、196. 7 kg·m-1·s^(-1),纬向水汽通量气候倾向率比经向大。南边界为纬向主要水汽输入边界,东边界为经向主要水汽输出边界,纬向水汽输送大于经向输送。多年平均PWV为1998. 3 mm,近38 aPWV呈现微弱增加趋势,1979—1997年,PWV呈下降趋势,1998年后PWV呈增加趋势,同期降水也在增加,说明该时段三江源地区气候转湿。PWV与水汽通量的年际变化趋势和转折年相一致。三江源区多年平均PCE为24. 57%,1989年PCE最高,达32. 76%,各季节平均PCE空间分布与年平均PCE分布一致,均表现出南部、东南部高,西部、东北部低的变化特征,各季节PCE大小差异明显,春季多年平均PCE为15. 92%,夏季25. 67%,秋季21. 01%,冬季仅7. 03%。