东昆仑得尔龙地区华力西期花岗岩地质地球化学特征及构造环境分析

东昆仑得尔龙地区花岗岩体侵位于二叠纪—三叠纪早期,岩石类型为黑云母花岗闪长岩、黑云母二长花岗岩、二云母二长花岗岩。早期次的黑云母花岗闪长岩中含有暗色的镁铁质矿物包体。SiO2含量为65.04%~73.47%,全碱含量为5.29%~8.52%,K2O/Na2O平均值为0.70,Al2O3平均为14.79%;亏损高场强元素Ta,Nb;∑REE平均为142.9×10-6,轻稀土元素相对富集,(La/Yb)N平均为17.15,δEu平均为0.71,表现为弱亏损。研究表明得尔龙地区花岗岩属次铝-过铝(高钾)钙碱性S型花岗岩,形成于后造山环境;岩浆源区的物质是多源的,主要为地壳物质的重熔,其次为幔源岩浆的底侵。     

福建平潭青峰老红砂物源示踪分析

本研究分别在平潭青峰、坛南湾和闽江口琅岐岛采集18个老红砂样品、19个海滩砂样品以及40个河滩砂样品,并对这些样品进行粒度和稀土元素(REE)测量。结果发现老红砂与闽江口琅岐岛河口砂的稀土元素含量特征十分接近;分别对老红砂与闽江河口砂REE数据以及坛南湾海滩砂与闽江口砂(REE)进行了判别函数分析,老红砂的∑REE平均值为84.25μg/g,琅岐岛河口砂的∑REE平均值为89.81μg/g,相似性明显;坛南湾海滩砂的∑REE平均值为16.41μg/g,与闽江河口砂含量差别较大。研究表明:青峰老红砂沉积物主要来源于闽江口河口砂,末次间冰期暖湿气候下闽江输砂量增大,河口外沿岸流增强,大量河砂进入海坛海峡,在强劲的季风搬运下,沉积于平潭岛北部,形成以青峰为代表的平潭岛北部老红砂;而坛南湾海滩砂代表海洋波浪搬运的泥沙,不是老红砂的物源。     

免烧粉煤灰滤料的制备及其性能的研究

为了扩大粉煤灰的应用范围,减少其对环境的污染,并且寻求一种新的水处理滤料的配方与制备方法,以粉煤灰、粘土为主要原料,以生石灰、石膏、水泥为激发剂,以H₂O₂（双氧水）、NaHCO₃为发泡剂,经搅拌、成型、自然冷却等工艺在实验室制备了免烧粉煤灰滤料.结果表明,如果以孔隙率作为主要的性能评价指标,制备免烧粉煤灰滤料的最佳质量配比为：粉煤灰46.30%,粘土13.89%,生石灰18.52%,水泥13.89%,石膏1.85%,纯H₂O₂ 5.55%,此时所制滤料的孔隙率为72.24%.     

磨抛光合成新材料在岩矿制片中的应用

作者利用所研制出来的磨抛光合成新材料与传统磨抛光工艺进行了对比试验。通过对多种最常使用的矿物或岩石的反复试验,结果表明合成新材料不仅大大提高了工作效率,还具有抛光速度快(所需时间仅为传统工艺的1/3~1/2),而且抛光效果极佳(基本无糙面或麻点),经久耐用,耗材极低和基本无巴盘打片现象。     

Calcium,Na, K and Mg Concentrations in Seawater by Inductively Coupled Plasma‐Atomic Emission Spectrometry: Applications to IAPSO Seawater Reference Material,Hydrothermal Fluids and Synthetic Seawater Solutions

We report a measurement procedure to determine simultaneously the major cation concentrations (Na, Ca, K and Mg) of seawater‐derived solutions by inductively coupled plasma‐atomic emission spectrometry. The best results were obtained when the IAPSO (‘standard’) seawater reference material was diluted by thirty times with Milli‐Q^® water. We obtained an average reference value r_K (the ratio of the mass fraction of potassium to that of chlorine, i.e., (g kg^?1)/(g kg^?1)) for IAPSO seawater of 0.0205 ± 0.0006 (2.9% RSD), not significantly different from 0.0206 ± 0.0005 (2.4% RSD) for seawater composition reported in the literature. The measured Na, Ca and Mg concentrations correspond to r_Na, r_Ca and r_Mg values of 0.5406 ± 0.0026 (0.5% RSD), 0.02192 ± 0.00048 (2.2% RSD) and 0.06830 ± 0.00047 (0.7% RSD), respectively, in line with previous values measured by wet‐chemistry and atomic absorption spectrophotometry or wet‐chemical titration. Our measurement procedure was used successfully on synthetic seawater solutions and high‐temperature hydrothermal fluids.     

辽宁西丰一带侵入岩形成环境和成因探讨

西丰一带侵入岩即以前所说的西丰大岩体,是布列亚-张广才岭巨型花岗岩带组成部分.该巨型花岗岩带记录了造山带从古亚洲洋板块开始俯冲、洋盆闭合到增生造山演化过程的基本信息.现在已经将规模宏大的西丰大岩体进行了详细解体,重新归并成4个侵入期次,划分为11个侵入序次,统称辽宁省西丰一带侵入岩.在详细解体、重新归并和划分的基础上,进一步探讨了各序次侵入岩形成的温压条件、构造环境、物质来源与成因.早二叠世第一序次、第二序次侵入岩以及中侏罗世第一序次侵入岩为I型花岗岩,晚白垩世第三序次(闪长玢岩)也为I型,主要物质来源是地壳中岩浆岩重熔的成分.其余各序次侵入岩均为S型花岗岩,主要物质来源是地壳中沉积岩重熔的成分.西丰一带,早二叠世第一个序次侵入岩为火山弧型深成岩,早二叠世第二个序次侵入岩为火山弧型与同碰撞型的过渡类型.早二叠世第三序次至中侏罗世第各序次侵入岩和晚白垩世各序次侵入岩为同碰撞型和碰撞后型花岗岩.这些特征与古亚洲洋晚期的消减、闭合和增生造山演化序列基本吻合.     

西秦岭舒家坝地区泥盆纪舒家坝群碎屑锆石LA-ICP-MS U-Pb年龄：源区特征与形成时代

以西秦岭舒家坝地区泥盆纪舒家坝群碎屑岩为研究对象,进行碎屑锆石LA-ICP-MS U-Pb年龄研究,探讨其形成时代、物源组成和构造背景。所测样品最小锆石年龄组的年龄加权平均值为413Ma,代表了舒家坝群的沉积下限,结合前人研究的古生物资料将其形成时代限定为中泥盆世。所获碎屑锆石年龄可划分为4个谱段：震旦纪—古生代年龄谱段619~409Ma,峰值为445Ma;新元古代年龄谱段930~735Ma,峰值为849Ma;中元古代年龄谱段1760~1033Ma;新太古代—古元古代年龄谱段3095~2478Ma。综合研究认为,舒家坝群的物源具多元性,包括西秦岭北缘构造带、北祁连造山带东段和华北板块基底,其中北祁连造山带东段和西秦岭北缘构造带是舒家坝群沉积的主要物源区,且后者占主导地位。结合区域地质资料,根据其物源组成特征判断,舒家坝群形成于陆—陆或弧—陆碰撞后由挤压转换为伸展环境的局部裂陷盆地。     

云南建水水草冲铜矿矿床地质特征及成矿物质来源

本文通过研究云南建水水草冲铜矿地质特征、围岩玄武岩和矿石矿物的微量元素、S、C、O同位素的组成,示踪了该矿床的成矿物质来源和性质。研究结果表明,云南建水水草冲铜矿位于滇东南哀牢山变质体北侧,容矿围岩为峨眉山玄武岩,矿体受北东向逆断层及其次级断裂控制,延深大于延长,形状不规则,矿体内多夹灰岩角砾及矿化玄武岩角砾,矿石矿物主要为黄铜矿,矿化蚀变以硅化、碳酸盐化、绿泥石化为主。水草冲铜矿黄铜矿与黄铁矿稀土元素具有相同的稀土元素组成与含量,ΣREE平均为1.901×l0-6,富集轻稀土元素,轻重稀土元素比(LREE/HREE)平均为8.188,（La/Yb）N值平均为10.259;δEu值平均为0.977;Ce呈现弱负异常,δCe值平均为0.808。黄铁矿中的Co/Ni比值为0.835,显示水草冲铜矿床为中温热液矿床;黄铁矿的Y/Ho比值平均为38.23,表明水草冲铜矿床的成矿流体为混合来源。结合黄铁矿的稀土微量元素特征,推断水草冲铜矿床的成矿流体是Cl多于F的流体。S的来源复杂,黄铁矿δ34SCDT（‰）的变化范围（18.3~29.4）与海水硫酸盐(海相蒸发岩)的δ34S值接近或略低;黄铜矿δ34SCDT（‰）变化范围是-0.5~10.1,表明有深部硫的参与。δ13C V-PDB（0.9‰~2.6‰）,δ18O V-SMOW（14.3‰~15.9‰）反映了方解石流体可能为热液循环萃取沉积岩地层混合形成。综上,推测成矿物质为后期构造热液萃取围岩（玄武岩和灰岩等）所得,其中铜主要来自于玄武岩本身,而硫的来源以地层硫为主。     

Genesis study of high abundant 17a（H）-diahopanes in Lower Cretaceous lacustrine source rocks of the Lishu Fault Depression,Songliao Basin,Northeast China

Relatively abundant 17α（H）-diahopanes have been detected in the lower cretaceous lacustrine source rocks from the Lishu Fault Depression in the Songliao Basin Northeast China. Rich long chain tricyclic terpanes （carbon number up to C35） and gammacerane have been observed in those source rocks with relatively abundant 17α（H）-diahopanes, which is rarely seen in previous reports. In this paper, the formation of 17α（H）-diahopanes has been discussed from three aspects including maturity, oxidation-reduction nature of depositional environment and parent material composition by the GC/MS analyses. The results reveal that maturity and oxidation-reduction nature of depositional environment have little effect on the formation of 1 7α（H）-diahopanes in the investigated area. How- ever, the positive correlation between long-chain tricyclic terpanes and 17α（H）-diahopanes argues strongly for a common origin, and the origin is related to the algaes in saline water environment. The algaes in saline water envi- ronment may be a kind of origin of 1 7α（H）-diahopanes.     

An enhanced constitutive model for crushable granular materials

Studies in the past have tried to reproduce the mechanical behaviour of granular materials by proposing constitutive relations based on a common assumption that model parameters and parameters describing the properties, including gradation of individual grains are inevitably linked. However successful these models have proved to be, they cannot account for the changes in granular assembly behaviour if the grains start to break during mechanical loading. This paper proposes to analyse the relation between grading change and the mechanical behaviour of granular assembly. A way to model the influence of grain breakage is to use a critical state‐based model. The influence of the amount of grain breakage during loading, depending on the individual grain strength and size distribution, can be introduced into constitutive relations by means of a new parameter that controls the evolution of critical state with changes in grain size distribution. Experimental data from a calcareous sand, a quartz sand, and a rockfill material were compared with numerical results and good‐quality simulations were obtained. The main consequences of grain breakage are increased compressibility and a gradual dilatancy disappearance in the granular material. The critical state concept is also enriched by considering its overall relation to the evolution of the granular material. Copyright © 2009 John Wiley & Sons, Ltd.