矿产开发与环境保护

通过国内多个矿区实例，较系统地叙述了矿产资源开发导致的生态环境破坏和污染状况。表明矿产开发中对环境污染的途径包括河流、土壤、等。最后简要介绍了国内、国外几种对采矿污染比较有效的防治措施。     

The Rotational Structure along the Eastern Segment of the Altyn Tagh Fault and Its Implications in Dynamics

As a result of the left-lateral strike-slipping of the Altyn Tagh fault in Neotectonic period, a contra-rotational structure, namely the Zhaobishan vortex structure, has developed at the juncture of the main Altyn Tagh fault and the northern fringe fault of the Qilian Mountains.Preliminary analysis on the deformation and evolution of the Zhaobishan vortex structure. In combination with the previous data, suggests that the tectonic transform between the Altyn Tagh fault and the northern fringe fault of the Qilian Mountains attributes to the deformation of the rotational structure. The existence of a series of rotational structures along the Altyn Tagh fault and on the northeastern edge of the Qinghai-Xizang(Tibet) plateau indicate that as the substance in the northern Qinghal-Xizang (Tibet) plateau moves clockwise around the eastern tectonic knot of the Himalayas, rotational structures become the principal mode on the northern marginal zone of the Plateau of transforming and absorbing tectonic deformation.     

天山山区近40a年降水变化特征与南、北疆的比较

本文分析了天山山区近40 a来年降水变化的基本特征，并与南疆、北疆进行了比较，所得的主要结果如下：(1)天山山区在年降水量干湿变化阶段上与北疆的相似性强于南疆。(2)年降水量的空间分布的同步变化性以北疆为最好，南疆最差，天山山区居中，而年降水量的空间分布的反向变化性，以天山山区为最大，北疆最小，南疆居中。(3)天山山区与南疆从60年代到90年代，年降水均表现出了持续的增加的趋势，北疆年降水从60年代到90年代，除70年代外，不断增多。     

晋北区中小地震活动与晋冀蒙交界区6级地震的关系

分析了晋北区中小地震(3.0≤ML≤5.0)的活动特征。统计发现,在1989 年山西大同-阳高6.1、1996年内蒙包头6.4和1998年河北张北6.2 级中强地震前1~2 年内晋北地区的中小地震活动年频次有明显的增强-衰减-发震这一特征;震前主震近场区的地震条带活动对主震位置有预示意义,而较远场的地震活动仅反映主震前应力水平的增强。并有震前活动向未来强震区靠近的特征。     

An approach for quantifying geomorphological impacts for EIA of transportation infrastructures: a case study in northern Spain

A methodological proposal for the assessment of impacts due to linear infrastructures such as motorways, railways, etc. is presented. The approach proposed includes a series of specific issues to be addressed for each geomorphological feature analysed—both ‘static’ and ‘dynamic’—as well as a series of steps to be followed in the process.Geomorphic characteristics potentially affected were initially identified on the basis of a conceptual activities/impacts model that helps to single out geomorphic impacts related to environmental concerns for the area. The following issues were addressed for each individual impact: nature of potential effects; indicators that can be used to measure impacts; criteria of ‘geomorphologic performance’; procedure for measurement/prediction of changes; translation of geomorphologic impacts into significant terms from the viewpoint of human concerns; possible mitigation and/or compensation measures.The procedure has been applied to a case study corresponding to a new motorway in the Basque Country, northern Spain. Geomorphological impacts considered in this analysis included: (1) consumable resources; (2) sites of geomorphological interest; (3) land units with high potential for use, high productivity or value for conservation; (4) visual landscape; (5) slope instability processes. The procedure has been designed for implementation in a Geographic Information System (GIS) environment. Details are given on the application of the method to each individual impact analysed and results are presented in both numerical and map form.Impacts assessed were initially expressed by means of heterogeneous magnitudes, depending on the geomorphological feature considered. Those geomorphological impacts were then translated into significant terms and homogeneous magnitudes. Integration was carried out on the basis of impact values thus obtained. Final integrated results were also expressed in numerical and map form.The method proposed enables comparison of alternatives as well as ‘prediction’ and assessment of impacts in terms directly related to geomorphic characteristics. It also facilitates the expression of those impacts in terms that allow integration with other types of environmental impacts.     

Late Quaternary systematic stream offsets caused by repeated large seismic events along the Kunlun fault, northern Tibet

The Kunlun fault is one of the largest strike-slip faults in northern Tibet, China. In this paper, we focus upon the Kusai Lake–Kunlun Pass segment of the fault to understand the geomorphic development of offset streams caused by repeated large seismic events, based on tectono-geomorphic analysis of high-resolution satellite remote sensing images combined with field studies. The results indicate that systematic left-lateral stream offsets appear at various scales across the fault zone: Lateral offsets of small gullies caused by the 2001 M_w 7.8 Kunlun earthquake vary typically from 3 m to 6 m, meanwhile streams with cumulative offsets of 10 m, 25–30 m, 50–70 m, 250–300 m and 750–1400 m have resulted from repeated large seismic events during the late Quaternary. An average slip rate of 10 ± 1 mm/year has been estimated from the lateral stream offsets and ¹⁴C ages of alluvial fan surfaces incised by the streams. A three-dimensional model showing tectono-geomorphic features along a left-lateral strike-slip fault is also presented. The Kusai Lake–Kunlun Pass segment provides an opportunity to understand the relationship between geomorphic features produced by individual large seismic events and long-term geomorphic development caused by repeated large seismic events along a major strike-slip fault.     

中国北方地区秋季植被变化及对气候变化的响应研究

基于1982~2006年的AVHRR GIMMS NDVI数据,使用一元线性回归和分段线性回归等方法,通过对中国北方地区植被变化及其与气候因子的关系研究,揭示该地区近25年来在不同时段的植被变化趋势及对气候变化的响应规律,从而为该地区的生态环境变化研究提供理论依据。研究结果表明:1)中国北方地区秋季植被在25年时间内整体呈上升趋势。秋季NDVI在秋季温度断点之前以上升趋势为主,秋季NDVI在秋季温度断点之后仍以上升趋势为主,但上升趋势有所放缓。2)通过分段线性回归方法和相关分析研究得出中国北方地区秋季温度是秋季NDVI变化的主要驱动力。在秋季温度断点之后,秋季温度仍呈上升趋势而降水呈显著减少的面积增多,从而在温度和降水双重影响下的干旱胁迫导致植被下降;当秋季温度下降而秋季降水增多时干旱发生概率变小,从而使秋季NDVI呈上升趋势。     

Fault geometry and mechanics of marly carbonate multilayers: An integrated field and laboratory study from the Northern Apennines,Italy

Sealing layers are often represented by sedimentary sequences characterized by alternating strong and weak lithologies. When involved in faulting processes, these mechanically heterogeneous multilayers develop complex fault geometries. Here we investigate fault initiation and evolution within a mechanical multilayer by integrating field observations and rock deformation experiments. Faults initiate with a staircase trajectory that partially reflects the mechanical properties of the involved lithologies, as suggested by our deformation experiments. However, some faults initiating at low angles in calcite-rich layers (θ_i = 5°–20°) and at high angles in clay-rich layers (θ_i = 45°–86°) indicate the important role of structural inheritance at the onset of faulting. With increasing displacement, faults develop well-organized fault cores characterized by a marly, foliated matrix embedding fragments of limestone. The angles of fault reactivation, which concentrate between 30° and 60°, are consistent with the low friction coefficient measured during our experiments on marls (μ_s = 0.39), indicating that clay minerals exert a main control on fault mechanics. Moreover, our integrated analysis suggests that fracturing and faulting are the main mechanisms allowing fluid circulation within the low-permeability multilayer, and that its sealing integrity can be compromised only by the activity of larger faults cutting across its entire thickness.     

History of faulting in the Northern Hastings Block,southern New England Orogen

Brittle failure is common in the Devonian to Permian rocks in the Northern Hastings Block (NHB) and is manifested by faults of different orientation and kinematic histories, but the timing of fault movement is not well defined. In this study, faults in the NHB were analysed with the map pattern of cross-cutting faults used to estimate the relative time of movement and relationship to other faults. We defined five episodes of faulting or fault reactivation that affected the NHB. The Yarras Fault System on the southwestern side of the NHB and the Parrabel Fault and related faults on the eastern side of the NHB are the two major fault systems responsible for transporting and rotating the NHB in the late Carboniferous. Faults on the eastern, northeastern and northern part of Parrabel Dome started and stopped moving after emplacement of the Hastings Block and before the intrusion of the Werrikimbe Triassic granitoids. We suggested that the movement on the major bounding faults is related to the accommodation of the NHB to the folding and cleavage development in the adjoining Nambucca Block, and is associated with the earliest part of the Hunter–Bowen Orogeny. Limited dextral movement on the extensions of the Taylors Arm Fault System caused minor displacements in the northeastern part of the NHB during the Late Triassic. Some small faults cut the Triassic granitoids or Triassic Lorne Basin sediments indicating tectonic activity continued post-Triassic.     

阿尔泰-准噶尔北缘铬铁矿- Cu- Au- Pb- Zn- Ni成矿带主要成矿地质特征及潜力分析

阿尔泰-准噶尔北缘铬铁矿-Cu-Ni-Au-Pb-Zn-Ni成矿带是全国重点部署找矿勘查工作的16个重点成矿区带之一,是全球阿尔泰巨型成矿带位于中国境内的一部分。文章根据全国矿产资源潜力评价成果,结合新的成矿理论和找矿进展,对该成矿带的边界进行了新的修定;从大地构造演化历史出发,分析总结了该带区域成矿地质背景和有利成矿地质条件,进一步修订了成矿带的成矿谱系;总结了成矿带内次级成矿单元的成矿特征;对带内矿床的主要成因类型和相应的典型矿床的成矿特征进行了总结;分析了成矿带的资源潜力,并在此基础上,确定了Cr、Mo、Cu、Au、Ni、Pb、Zn、Ag为本带下一步勘查部署的主攻矿种,划分了9个远景区,其中3个为重点远景区,6个为一般远景区。此项工作对本成矿区带内下一步矿产勘查工作部署有着重要指导意义和参考价值。