复合注浆法在基础加固中的应用

复合注浆法是将静压注浆法和高压旋喷注浆法进行时序上的结合，分别发挥两种注浆加固方法各自的优点，又可克服各自的技术和工艺缺陷的一种基础加固新方法，它可以较好地对既有建筑物地基和新建建筑基础出现质量问题进行加固处理。简述了复合注浆法的加固作用机理、设计及计算模型，在此基础上通过工程实例介绍其施工技术并分析其加固效果和经济性。     

A new interpretation of terraces in the Taranto Gulf: the role of extensional faulting

The Taranto Gulf of southern Italy provides an excellent case where it is possible to document the importance of normal faults in displacing terraced deposits. The study area is located at the front of the southern Apennines, that is a fold-and-thrust belt developed following the closure of the Mesozoic Tethys Ocean, and the deformation of the Adriatic passive margin during Tertiary and Quaternary times. The outer, eastern parts of the belt were structured in Quaternary, i.e. up to Middle Pleistocene times.The front of the chain is partially sealed by Pliocene–Pleistocene foredeep deposits, which represent the infill of the Bradanic Trough. The upper portion of the middle Pleistocene succession consists of marine sands and conglomerates that in the previous literature have been arranged in several orders of terraces. Analysis of aerial photographs and geomorphological mapping has shown the occurrence of prominent geomorphic lineaments, which appear to control the local drainage pattern. Some of these structures coincide with the map trace of normal faults that produce vertical offsets of the marine terrace surfaces in the order of ca. 10 m each. Many of the fault escarpments reduce their elevation and terminate laterally. In other cases fault escarpments are laterally continuous and can be traced for up to 3–4 km. Scarp height is between 2 and 10 m. Their mean trend ranges from NNE–SSW to ENE–WSW and defines an arcuate pattern that mimics the present coastline.An accurate geomorphological, sedimentological and stratigraphic analysis has been carried out in a selected area of the Bradanic Trough (Pisticci transect) to investigate in detail the relationships between normal faults and the development of the terraces. This analysis allowed us to recognise five facies associations related to the upper and lower beachface and to the neritic clays which represent the substratum of the terraces. More importantly, we observed that all the terraced deposits in the Pisticci transect could be referred to a single sedimentary body displaced by faults. The terraced deposits are related to an event of beach progradation, of Middle Pleistocene age, which has been documented in other areas of the Italian peninsula. These results outline an intimate relationship between the arcuate trend of the recognised fault set and the present coastline pattern. The development of the normal faults can be related to large-scale gravitational processes developed after the general tilting towards the SE of the Bradanic Trough.     

Dynamic theory of rigid-plasticity

This paper deals with an analysis method for the response and motion of soil-like rigid-plastic bodies under seismic loading conditions. A continuity condition to determine the acceleration distribution within the rigid-plastic body when the failure occurs during seismic motions is proposed. Combining this continuity condition of acceleration and the ‘Generalized Limit Equilibrium Method (GLEM)’, the responses of the earth structure during seismic motions as well as the permanent displacements can be obtained, where GLEM is one of the limit equilibrium methods proposed by the authors for static problems and providing the approximate solution for Kötter's equation. The theoretical formulation of the method, the illustrative examples, and some comparisons between the analytical and experimental results are demonstrated.     

Experimental and theoretical study of stability of dense hydrous magnesium silicates in the deep upper mantle

Fluid-undersaturated experiments were conducted to determine the phase relations in the simplified peridotite system MgO-SiO₂-H₂O (MSH) at 11.0-14.5 GPa and 800-1400 °C. Stability relations of dense hydrous magnesium silicates (DHMSs) under fluid-undersaturated conditions were experimentally examined. From the fluid-absent experimental results, we retrieved thermodynamic data for clinohumite, phase A, phase E, and hydrous wadsleyite, consistent with the published data set for dry mantle minerals. With this new data set, we have calculated phase equilibria in the MSH system including dehydration reactions. The dehydration reactions calculated with lower water activities of 0.68-0.60 match the fluid-present experiments of this study above 11.0 GPa and 1000 °C, indicating that considerable amounts of silicate component were dissolved into the fluid phase. The calculated phase equilibria illustrate the stability of the post-antigorite phase A-bearing assemblages. In the cold subducting slab peridotite, phase A + enstatite assemblage survives into the transition zone, whereas phase A + forsterite + enstatite assemblage forms hydrous wadsleyite at a much shallower depth of about 360-km. The slab is subducted with no dehydration reactions occurring when entering the transition zone. The phase equilibria also show the high temperature stability of phase E. Phase E is stable up to 1200 °C at 13.5 GPa, a plausible condition in the mantle of relatively low temperature, i.e., beneath subduction zones. Phase E is a possible water reservoir in the mantle as well as wadsleyite and ringwoodite.     

致密砂岩的形成机制及其地质意义——以塔里木盆地英南2井为例

砂质岩的孔隙和喉道被网格状粘土矿物和次生加大矿物充填成微细孔喉状结构时,形成具有较高毛细管压力的致密砂岩。它与地层水发生水锁效应,可大大降低渗透率,成为致密砂岩盖层。当含水饱和度在50%以下时,束缚水饱和度比较低,致密砂岩储层可以产气;当含水饱和度在50%～90%区间时,具有较高的束缚水饱和度,相对渗透率非常低,它既不能产气也不能产水,反映为渗透率瓶颈区(具有盖层性质);当含水饱和度大于90%以上时,致密砂岩储层仅微量产水。塔里木盆地英南2井侏罗系气藏盖层由致密砂岩构成,不含水时的气体渗透率在(0.027～0.081)×10-3μm2,不能构成封堵;当含水饱和度达到60%以上时,相对渗透率几乎为零,构成有效盖层。     

DEM-based morphometry of range-front escarpments in Attica, central Greece, and its relation to fault slip rates

In this paper, we apply current geological knowledge on faulting processes to digital processing of Digital Elevation Models (DEM) in order to pinpoint locations of active faults. The analysis is based on semiautomatic interpretation of 20- and 60-m DEM and their products (slope, shaded relief). In Northern–Eastern Attica, five normal fault segments were recognized on the 20-m DEM. All faults strike WNW–ESE. The faults are from west to east: Thriassion (THFS), Fili (FIFS), Afidnai (AFFS), Avlon (AVFS), and Pendeli (PEFS) and range in length from 10 to 20 km. All of them show geomorphic evidence for recent activity such as prominent range-front escarpments, V-shaped valleys, triangular facets, and tilted footwall areas. However, escarpment morphometry and footwall geometry reveal systematic differences between the “external” segments (PEFS, THFS, and AVFS) and the “internal” segments (AFFS and FIFS), which may be due to mechanical interaction among segments and/or preexisting topography. In addition, transects across all five escarpments show mean scarp slope angles of 22.1°±0.7° for both carbonate and metamorphic bedrock. The slope angle equation for the external segments shows asymptotic behaviour with increasing height. We make an empirical suggestion that slope angle is a function of the long-term fault slip rate which ranges between 0.13 and 0.3 mm/yr. The identified faults may rupture up to magnitude 6.4–6.6 earthquakes. The analysis of the 60-m DEM shows a difference in fault patterns between Western and Northern Attica, which is related to crustal rheology variations.     

Normal faulting as a control on the stratigraphic development of shallow marine syn-rift sequences: the Nukhul and Lower Rudeis Formations, Hammam Faraun fault block, Suez Rift, Egypt

Tectono-stratigraphic analysis of the East Tanka fault zone (ETFZ), Suez Rift, indicates that the evolution of normal fault segments was an important control on syn-rift depositional patterns and sequence stratigraphy. Sedimentological and stratigraphic analysis of the Nukhul Formation indicates that it was deposited in a narrow (ca 1–2 km), elongate (ca 5 km), fault-bounded, tidally influenced embayment during the low subsidence rift-initiation phase. The Nukhul Formation is composed of transgressive (TST) and highstand (HST) systems tract couplets interpreted as reflecting fault-driven subsidence and the continuous creation of accommodation in the hangingwall to the ETFZ. The overlying Lower Rudeis Formation was deposited during the high subsidence rift-climax phase, and is composed of forced regressive systems tract (FRST) shallow marine sandbodies, and TST to HST offshore mudstones. Activity on the ETFZ led to marked spatial variability in stratal stacking patterns, systems tracts and key stratal surfaces, as footwall uplift, coupled with regressive marine erosion during deposition of FRST sandbodies, led to the removal of intervening TST–HST mudstone-dominated units, and the amalgamation of FRST sandbodies and the stratal surfaces bounding these units in the footwall. This study indicates that the evolution of normal fault segments over relatively short (i.e. <1 km) length-scales has the potential to enhance or suppress a eustatic sea-level signal, leading to marked spatial variations in stratal stacking patterns, systems tracts and key stratal surfaces. Crucially, these variations in sequence stratigraphic evolution may occur within time-equivalent stratal units, thus caution must be exercised when attempting to correlate syn-rift depositional units based solely on stratal stacking patterns. Furthermore, local, tectonically controlled variations in relative sea level can give rise to syn-rift stacking patterns which are counterintuitive in the context of the structural setting and perceived regional subsidence rates.     

Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia

Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage.     

Geologic and geotechnical effects of an impact caused by an airplane crash

A Turkish Airlines (THY) Boeing 737-400 plane crashed into alluvial soils creating an approximately 13 m deep and 30 m wide crater near the village of Adatepe, Ceyhan in southern Turkey. Effects of the impact on the soils in and around the crater were investigated from both the geological and soil mechanics point of view.

The results show that the impact caused severe deformations in the soils in and around the crater. The soils deformed similar to metamorphic rocks seen at many terrestrial hypervelocity impact craters around the world and became overconsolidated up to a distance of about 10 m from the crater wall as a result of the impact.

Also, the crash was recorded as a 2.7 magnitude earthquake by a nearby microtremor seismograph which provided both the location (epicenter) and time of the crash which was not known immediately after the crash.