一种新型测向传感器——磁通门罗盘

本文对磁通门罗盘的基本工作原理、实验线路以及主要技术指标和一些测量数据作简要介绍,最后对仪器的误差进行简单分析并提出一些减小误差的改进措施。     

A New Pursuit Mode of Nonlinear Wave Surface

The numerical mode of nonlinear wave transformation based on both the Laplace equation for water field and the Bemoulli equation for water surface is a kind of time-domain boundary problem with initial conditions. And the basis for establishing the numerical mode of nonlinear wave in time domain is to trace the position of wave free surface and to calculale the instantaneous surface height and surface potential function. This paper firstly utilizes the ‘0-1‘ combined BEM to separate the boundary by means of discretization of Green‘ s integral equation based on the Laplace equation, then separates the free surface of wave with FEM and derives the FEM equation of wave surface that satisfies the nonlinear boundary conditions. By jointly solving the above BEM and FEM equations, the wave potential and surface height could be obtained with iteration in time domain. Thus a new kind of nonlinear numerical mode is established for calculating wave transformation. The wave test in the numerical wave tank shows that the numerical simulation with this mode is of high accuracy.     

河口涨落潮槽水动力特征及河槽类型判定

在前人对河口冲刷槽研究的基础上,选择长江口南支、新桥水道、南小泓和南港主槽作为典型涨、落潮槽研究对象,以2001年洪季和2003年枯季实测资料为根据,比较分析了长江口涨落潮槽的水流、泥沙、优势流和优势沙等动力特征,结果表明用单一因子分析河槽性质不够全面.提出了一个(无量纲因子)河槽类型系数(λ)来综合表述河槽的多种水文泥沙特征,可以较全面地用多个影响因子来合理地判断河槽类型.     

Oligocene sequence stratigraphy and basin development in the Danish North Sea sector based on log interpretations

Five sequences are defined in the Oligocene succession of the Danish North Sea sector. Two of the sequences, 4.1a and 4.3, have been identified onshore Denmark.Two types of prograding lowstand deposits are recognized. Sand-dominated deposits occur proximally, comprising sharp-based forced regressive deposits covered with prograding low-stand deposits. Clay-dominated prograding lowstand deposits occur distally in the sequences. The highstand deposits are proximally represented by thick prograding sandy deposits and distally by thin and condensed intervals.The main sediment input direction was from the north and the northeast. A succession oif lithofacies, from shallow marine facies dominated by sand to outer shelf facies dominated by clay, is mapped in each of the sequences. An overall southward progradation of the shoreline took place during the Oligocene, interrupted only by minor shoreline retreats.     

南沙西部海域伸缩型右旋走滑双重构造系统及其动力学过程

万纳断裂带为一典型的右旋走滑系统,由其南段前锋的拉奈—沙捞越走滑－收缩叠瓦扇、北段尾端的南海西南次海盆西南端走滑－伸展叠瓦扇和中段的万安盆地走滑－拉分双重构造所组成,其动力主要源自中生代末以来华南—印支陆缘岩石圈的拆沉作用和南海海底扩张,它的走滑拉分作用直接导致了万安盆地的产生,对该海域油气等资源的形成与聚集起了重要的控制作用。     

Observation of clouds and solar radiation over the Pacific Ocean as relation to global climate

ＯｂｓｅｒｖａｔｉｏｎｏｆｃｌｏｕｄｓａｎｄｓｏｌａｒｒａｄｉａｔｉｏｎｏｖｅｒｔｈｅＰａｃｉｆｉｃＯｃｅａｎａｓｒｅｌａｔｉｏｎｔｏｇｌｏｂａｌｃｌｉｍａｔｅ￥ＦａｒｎＰａｒｕｎｇｏ；ＣｌａｒｅｎｃｅＮａｇａｍｏｔｏ；ＣｅｃｉｌｉａＭ．Ｉ．Ｒ．Ｇｉ...     

关于Mckenzie沉积盆地初始沉降公式的修正

根据Airy均衡原理对Mckenzie沉积盆地初始沉降公式进行了修正,并导出了公式的正确表达式 S=(a[(ρ_o-ρ_c)t_c/a(1-(aT_1t_c)/(2a))-(aT_1ρ_o)/2](1-1/β))/(ρ_o(1-aT_1)-ρ_w)     

Fractal Determination of Coastal Types Based on GIS--A Case Study of China

The probability of fractal determination of coastal types based on GIS is preliminarily discussed with China as an example. Finally, some significant conclusions are drawn: (1) The fractal dimension of coastline of the bedrock coast is larger than that of the plain coast on the same scale map; (2) As far as the bedrock coast is concerned, the larger fractal dimension of coastline of the bedrock coast on the same scale map indicates that the bedrock coast is probably not typical; (3) As far as the plain coast is concerned, the smaller fractal dimension of coastline of the plain coast on the same scale map indicates that it is probably the silt plain coast; (4) The different substantial compositions affect the fractal dimensions of coastlines of different coastal types. In general, the coast which lies in the north of the Hangzhou Bay consists of sand mainly, its surface is flat, and it is connected with the coastal plain, its landform is broad shoal, its total change is comparatively homogenous in the tidal dynamic process, and thus, the relatively smaller fractal dimension of coastline results from this. For the bedrock coast, there is more bedrock, the coastline is comparatively smooth and straight, being affected by the faults and ocean dynamic process, which result in the larger fractal dimension.     

Rifting to Spreading Process along the Northern Continental Margin of the South China Sea

Understanding the development from syn-rift to spreading in the South China Sea (SCS) is important in elucidating the western Pacific's tectonic evolution because the SCS is a major tectonic constituent of the many marginal seas in the region. This paper describes research examining the transition from rifting to spreading along the northern margin of the SCS, made possible by the amalgamation of newly acquired and existing geophysical data. The northernmost SCS was surveyed as part of a joint Japan-China cooperative project (JCCP) in two phases in 1993 and 1994. The purpose of the investigation was to reveal seismic and magnetic characteristics of the transitional zone between continental crust and the abyssal basin. Compilation of marine gravity and geomagnetic data of the South China Sea clarify structural characteristics of its rifted continental and convergent margins, both past and present. Total and three component magnetic data clearly indicate the magnetic lineations of the oceanic basin and the magnetic characteristics of its varied margins. The analyses of magnetic, gravity and seismic data and other geophysical and geological information from the SCS led up to the following results: (1) N-S direction seafloor spreading started from early Eocene. There were at least four separate evolutional stages. Directions and rates of the spreading are fluctuating and unstable and spreading continued from 32 to 17 Ma. (2) The apparent difference in the present tectonism of the eastern and western parts of Continent Ocean Boundary (COB) implies that in the east of the continental breakup is governed by a strike slip faulting. (3) The seismic high velocity layer in the lower crust seems to be underplated beneath the stretched continental crust. (4) Magnetic anomaly of the continental margin area seems to be rooted in the uppermost sediment and upper part of lower crust based on the tertiary volcanism. (5) Magnetic quiet zone (MQZ) anomaly in the continental margin area coincides with COB. (6) The non-magnetic or very weakly magnetized layer is probably responsible for MQZ. One of the causes of demagnetization of the layer is due to hydrothermal alteration while high temperature mantle materials being underplated. Another explanation is that horizontal sequences of basalt each with flip-flop magnetization polarity cancel out to the resultant magnetic field on the surface. We are currently developing a synthetic database system containing datasets of seismicity, potential field data, crustal and thermal structures, and other geophysical data to facilitate the study of past, contemporary and future changes in the deep sea environment around Japan; i.e. trench, trough, subduction zones, marginal basins and island arcs. Several special characteristics are an object-oriented approach to the collection and multi-faceted studies of global data from a variety of sources.     

Design of ship's bow form by potential-based panel method

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.