The protoliths to the sillimanite gneisses from the Larsemann Hills and geological implication in their formation

The source rock from which the sillimanite gneisses derive mainly was the biotite plagioclase gneiss in the Larsemann Hills. It is the deformation-metamorphism process under special pressure and temperature condition, not the original rock compositions, that controls the presence of sillimanite. To a great degree, the sillimanite gneiss was the mixture of the detaining materials of the migrating felsic melt from the bt-plagioclase gneiss that underwent partial melting and the relics when the melt was removed. In sillimanitization the original rock had been changed substantially in chemical composition. The related metamorphism process severely deviated from the isochemical series, the process was of, therefore, an open system. In addition, the Al2O3 contents of the original rock was an important, but not critical factor for the formation of sillimanite, i.e., the sillimanite-bearing rock need not be of aluminum rich in composition, and vise contrarily, the aluminum rock may not produce sillimanite. The authors of the present paper postulate that the source rock from which the aluminum rich rock derives need not be of aluminum rich, but sillimanitization is generally the Al2O3 increasing process. The aluminum rich sediments such as clay or shale need not correspond directly to sillimanite-rich gneisses. No argillaceous rock present equals to sillimanite-rich gneiss in chemical composition. The protoliths to the sillimanite gneisses from the Larsemann Hills, east Antarctica, and their adjacent area may be pelite, shale greywacke, sub-greywacke, quartz sandstone and quartz-tourmalinite. If correct, the conclusion will be of significant implication for the determination of the sillimanite gneiss formation process and the reconstruction of the protolith setting.     

Low-pressure granulite facies metamorphism in the Larsemann Hills area, East Antarctica; petrology and tectonic implications for the evolution of the Prydz Bay area

ABSTRACT Thermobarometric studies on various granulite facies areas along the Prydz Bay coast, East Antarctica (73°-79°E, 68°-70°S), show that, at around 1100 Ma, during a late Proterozoic orogeny, the rocks of the Larsemann Hills suffered a lower pressure metamorphic peak than the surrounding areas. Along the Prydz Bay coast, the rocks affected by this event include parts of the Vestfold Hills block plus all of the Rauer Group, the Larsemann Hills and the Munro Kerr Mountains. The dykes in the south-west corner of the Vestfold Hills were recrystallized during this event with little deformation at temperatures not quite as high as in the areas further south-west (650°C, 6.5 kbar) (Collerson et al., 1983), the Rauer Group was metamorphosed at 800°C and 7.5 kbar (Harley, 1987a), the Larsemann Hills at 750°C and 4.5 kbar, and the Munro Kerr Mountains probably at around 850°C and 5 kbar. Retrograde equilibration in the different areas occurred during decompression to about 10 km depth in all areas, followed by isobaric cooling at this depth. This paper shows that the peak metamorphism in the Larsemann Hills occurred at a pressure which is too low to have been the consequence of thermal relaxation of overthickened crust with normal mantle heat flow. Although other areas in Prydz Bay were metamorphosed at sufficiently high pressures so that their decompression paths are not inconsistent with a continental collision model, the inferred pre-metamorphic peak histories and the requirement of consistency with the Larsemann Hills, make it unlikely that collision followed by erosion-driven decompression is an appropriate model. We suggest that the thermal regime of the crust in the Larsemann Hills region was controlled by a perturbation in the asthenosphere, with magma invasion of the crust. We suggest that the 500 Ma event, represented in Prydz Bay by granitic outcrops at Landing Bluff and by several K/Ar ages from the Larsemann Hills area, was responsible for the final excavation of the terrane.     

北京西山青白口—下苇甸一带印支期侵入活动特征

本文根据青白口─下苇甸一带发育的基性→中性→酸性岩脉（床）的变形与围岩一致；变质作用特点与发育于石炭─二叠系及三叠系双泉组岩石中的变质作用特点相似；在下苇甸穹隆中发育的辉长岩中获得了Ｋ─Ａｒ全岩稀释法年龄２２９Ｍａ，证实这套岩脉（床）是印支期岩浆侵入活动产物，并对其地质特征和岩石地球化学特征进行了讨论。     

南极拉斯曼丘陵地区大地测量控制网

南极拉斯曼丘陵地区大地测量控制网的建立与施测前后共历经４年方始完成，总控制面积约１７７．６平方公里。本文主要讨论了该网分区布设情况及总体平差的原理与方法，并对成果进行了统计分析。经过整体平差的结果可以满足１：１００００测图的需要。该网也是我国东南极中山站地区的基础大地控制网     

Geological controls on Pleistocene glaciation and cirque form in Greece

Limestone and ophiolite rocks are common across the eastern Mediterranean and many of the highest mountains are formed in these rock types. In northwest Greece, Pleistocene glacial erosion was much more effective on limestone terrain where pronounced glacial incision and subglacial glacio-karst processes produced locally-complex topography. This enabled Pleistocene glaciers to form on a range of slope orientations in contrast to ophiolite terrains, where glaciers were strongly controlled by aspect. On limestone terrains, the largest ice masses formed on south-facing slopes, whereas in neighbouring higher mountains formed in ophiolite, glaciers were much more restricted and predominantly formed on north- and east-facing slopes.     

Large-Eddy Simulation Of Neutral Turbulent Flow Over Rough Sinusoidal Ridges

The requirements for a credible large-eddy simulation of neutral, turbulent flow over hills with an aerodynamically rough surface are discussed, in order to select a suitable case for simulation. As well as providing adequate resolution within the dynamically important inner region, obtaining a realistic upstream or undisturbed mean velocity profile is also of critical importance. A distributed drag canopy formulation has been introduced to the model to allow it to obtain such a profile while resolving very close to the rough surface. Simulations have then been performed of flow over ridges of varying heights. The results from the steepest case, which is just on the verge of separation, are compared with wind-tunnel observations. It is shown that the large-eddy simulation results are in much better agreement with the experimental data than are the results from a simple first-order mixing-length closure model. An encouraging lack of sensitivity of the simulation results to numerical resolution is also demonstrated.     

Policy and practice in karst landscape protection: Bohol, the Philippines

The karst landscape in the interior of the Philippines' Bohol Province represents one of the world's premier kegelkarst (cone karst) environments. Government efforts to protect some of this karst, exemplified by the establishment of the Rajah Sikatuna National Park and the Chocolate Hills Natural Monument, have proven to be significant catalysts of social conflict. In Bohol there is a long history of traditional land tenure, which has recently been supplanted by a Westernized model. Protected area establishment is a response to deforestation, agricultural exploitation and uncontrolled quarrying. However, the imposition of protective legislation to prevent further degradation has disenfranchized and marginalized many local farmers and residents. The conflict between the obligation of the State to ensure environmental protection and the perceived property rights of landowners and farmers has provoked an escalation in civil unrest and armed conflict.     

有关蛇绿岩研究的一些新进展

本文扼要介绍有关蛇绿岩的形成环境、成因类型划分及有关上地幔岩变形特征方面的新成果。     

益阳火山岩特征及其形成构造环境分析

益阳火山岩中的熔岩、辉长辉绿岩和玄武质科马提岩,分别与蛇绿岩套中的熔岩、熔岩中的脉岩或岩墙杂岩和层状堆晶辉长岩有相似或相同的化学成分与微量元素含量,它们具有蛇绿岩套属性。与邻区广西、江西和安徽等省的蛇绿岩套分布在同一带上。因而认为,湖南境内沿通道—淑浦—宁乡—浏阳一带存在一条元古宙的古板块消减带,它控制了湖南中北部地区大地构造的演化和发展。     

祁连山蛇绿岩型超镁铁岩铬铁矿床成矿的主要特征

祁连山造山带目前已发现不同规模的超镁铁岩体（群）1000余个,产有铬铁矿床（点）和矿化点80余处,这些岩体及其矿产主要产在北祁连优地斜增生地体边部的海沟带中,少数产在祁连中间地块的边部。岩体成因类型为蛇绿岩组合中的超镁铁质单元,铬铁矿的富集部位是地幔橄榄岩和堆积杂岩带底部的纯橄榄岩。岩石多为铝过饱和系列,岩体的平均化学成分接近于斜辉橄榄岩;Cr₂0₃的平均含量大于0.40％,Al₂0₃的平均含量近于或者大于1％。铬尖晶石的化学参数特征反映出低铁富镁的介质对形成富铬尖晶石是有利的。富铬岩体中Cr、Co、Ti、V的含量较高。