Alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands)

Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper.     

Application of MODFLOW and geographic information system to groundwater flow simulation in North China Plain, China

MODFLOW is a groundwater modeling program. It can be compiled and remedied according to the practical applications. Because of its structure and fixed data format, MODFLOW can be integrated with Geographic Information Systems (GIS) technology for water resource management. The North China Plain (NCP), which is the politic, economic and cultural center of China, is facing with water resources shortage and water pollution. Groundwater is the main water resource for industrial, agricultural and domestic usage. It is necessary to evaluate the groundwater resources of the NCP as an entire aquifer system. With the development of computer and internet information technology it is also necessary to integrate the groundwater model with the GIS technology. Because the geological and hydrogeological data in the NCP was mainly in MAPGIS format, the powerful function of GIS of disposing of and analyzing spatial data and computer languages such as Visual C and Visual Basic were used to define the relationship between the original data and model data. After analyzing the geological and hydrogeological conditions of the NCP, the groundwater flow numerical simulation modeling was constructed with MODFLOW. On the basis of GIS, a dynamic evaluation system for groundwater resources under the internet circumstance was completed. During the process of constructing the groundwater model, a water budget was analyzed, which showed a negative budget in the NCP. The simulation period was from 1 January 2002 to 31 December 2003. During this period, the total recharge of the groundwater system was 49,374 × 10⁶ m³ and the total discharge was 56,530 × 10⁶ m³ the budget deficit was −7,156 × 10⁶ m³. In this integrated system, the original data including graphs and attribution data could be stored in the database. When the process of evaluating and predicting groundwater flow was started, these data were transformed into files that the core program of MODFLOW could read. The calculated water level and drawdown could be displayed and reviewed online.     

Modeling of coupled tide–wave–surge process in the Yellow Sea

A coupled wave–tide–surge model has been developed in this study in order to investigate the effect of the interactions among tides, storm surges, and wind waves. The coupled model is based on the synchronous dynamic coupling of a third-generation wave model, WAM cycle 4, and the two-dimensional tide–surge model. The surface stress, which is generated by interactions between wind and wave, is calculated by using the WAM model directly based on an analytical approximation of the results using the quasi-linear theory of wave generation. The changes in bottom friction are created by the interactions between waves and currents and calculated by using simplified bottom boundary layer model. In consequence, the combined wave–current-induced bottom velocity and effective bottom drag coefficient were increased in the shallow waters during the strong storm conditions.     

厦门港潮汐水流及浑水悬沙整体模型设计

厦门港潮汐水流及浑水悬沙整体物理模型于1989年建成后，已进行了不少有意义的试验研究工作，取得较好效果。本文主要介绍模型的设计思想、相似准则、浑水悬沙相似理论的探讨、模型设计方法以及模型沙的选择等。     

南沙西部海域伸缩型右旋走滑双重构造系统及其动力学过程

万纳断裂带为一典型的右旋走滑系统,由其南段前锋的拉奈—沙捞越走滑－收缩叠瓦扇、北段尾端的南海西南次海盆西南端走滑－伸展叠瓦扇和中段的万安盆地走滑－拉分双重构造所组成,其动力主要源自中生代末以来华南—印支陆缘岩石圈的拆沉作用和南海海底扩张,它的走滑拉分作用直接导致了万安盆地的产生,对该海域油气等资源的形成与聚集起了重要的控制作用。     

太平洋海域海平面变化的灰色系统分析

应用灰色系统理论，对太平洋海域４８个长期验潮站的月均海平面分别建立了ＧＭ（１，１）模型。ＧＭ（１，１）模型能较好地反映太平洋海域的海平面变化的趋势，它除了能给出连续的海平面变化速率外，同时能方便地给出海平面变化的加速率。模拟结果表明，在太平洋地壳均衡假设下，太平洋海域的月均海平面以平均速率０．１７ｃｍ／ａ上升。在太平洋海域所取的４８个长期验潮站中，有４０个站在加速上升，全部站的平均加速度为０．０００２９ｃｍ／ａ２。且加速率逐渐增大。当然这些加速率都很小，但作为一种普遍性的趋势，这已足以说明：太平洋海域的海平面在加速上升     

季节内SST和混合层深度变化的模式研究

用Niiler—Kraus类型的混合层积分模式,对TOGA—COARE强化观测期间由《实验3号》科学考察船观测资料得到的混合层深度和SST在季节内时间尺度的变化进行了模式研究。指出:1.混合层耗散参数与较长时间尺度过程风应力的变化存在着比较好的对应关系;2.模式可以较好的对风场和热通量场在季节内时间尺度的变化作出响应,模拟出季节内时间尺度SST的变化;3.Niiler,-Kraus模式在考虑耗散作用后,可用于海洋季节内时间尺度变化的模式研究。     

Numerical Simulation of Residual Circulation due to Bottom Rouglmess Variability Under Tidal Flows in A Semi-Enclosed Bay

Nowadays there are some chronic serious environmental problems, such as eutrophication, blue tide and so on, in a complicated coastal zone or a semi-enclosed bay, because the water exchanges between an inner bay and an outer sea is weak compared with the supply of contaminant. Under this situation, a method to improve the water quality by 3-dimensional small unsymmetrical structures has been proposed by Komatsu et al. In this paper, several numerical simulations of the tidal current and concentration for various arrangements of bottom roughness in a semi-enclosed model bay are carfled out with a depth-averaged 2-D numerical model. The model is solved by the hybrid finite analytic method with nonstaggered grid. And the SIMPLES algorithm with Rhie and Chow＇ s momentum interpolation technique is used for the simulation. The effect of Komatsu＇ s method for water purification is examined by numerical simulation. The result of numerical experiment indicates that it is possible to generate a new tidal residual current and to activate a tidal exchange by bottom roughness arrangement only.