Palaeolimnology of Lake Piene-Kuuppalanlampi (Kurkijoki, Karelian Republic, Russia): isolation history, lake ecosystem development and long-term agricultural impact

The post-glacial history of Lake Pieni-Kuuppalanlampi, western Lake Ladoga region, was studied by means of stratigraphic pollen and diatom analyses. Diatoms were analysed to track the isolation history of the basin and the limnological effects of the early land-use phases indicated by pollen analysis. Chrysophycean stomatocysts and Isoëtes spores were also employed in the limnological reconstructions. Sediment dating was provided by six conventional radiocarbon dates.The lower part of the 370-cm long sediment sequence represents early Holocene, large lake conditions: the (freshwater) Yoldia and Ancylus stages of the Baltic basin, with a short-term lagoonal or isolation phase at the end of Yoldia. The basin was isolated due to Ancylus lake regression at 9785 cal B.P. For the small-lake sequence (0–250 cm) we used diatom inferences (WA-method) for hindcasting water chemistry. The post-isolation limnology of Pieni-Kuuppalanlampi reflects the development of vegetation on its small hill-top catchment. In its early development, the lake was mesotrophic, but became more acidic (pH about 6) and oligotrophic after the decline of temperate hardwood trees and the spread of spruce to the area after around 5000 B.P. The lake ecosystem appears to have reacted sensitively to agricultural land-use in the catchment from AD 400–800 onwards: inferred total phosphorus levels and pH both rise during these periods.     

Soulèvement et plissement tectoniques révélés par analyse mathématique empirique de profils longitudinaux de rivières : un cas à TaiwanEmpirical mathematical analysis of longitudinal river profiles reveals tectonic uplift and folding: a case in Taiwan

We analyse longitudinal river profiles in southwestern Taiwan. As all necessary data are not available, a physical modelling of river erosion would be subject to large uncertainties. We thus shortcut this modelling and adopt simple empirical exponential equations giving riverbed elevation as a function of downstream distance. We identify a positive altimetric anomaly, which reveals active uplift of an anticline at the front of the fold-and-thrust belt. To cite this article: J. Angelier, R.-F. Chen, C. R. Geoscience 334 (2002) 1103–1111.     

合肥市耕地和粮食可持续发展研究

收集1980～1999年合肥市耕地、人口、粮食等资料，定量分析在城市化快速发展下耕地的数量、质量变化和耕地减少的形式以及人口、粮食的变化，并用回归法分析它们的变化趋势。研究认为，在2005，2010年合肥市食物保障能力分别为97％和95％，对粮食生产与其影响因素进行了灰色关联分析，提出提高粮食产量的对策和实现途径。     

江淮地区地震烈度衰减关系的研究

地震烈度衰减关系具有较强的地区性,这是由于不同地区的震源特性、传播介质和场地条件的不同而引起.研究区(北纬29°～35°,东经114°～120°)位于华北地震区和华南地震区之间的过渡地区,地震活动性总体水平不高,烈度衰减关系有其自身的震源特性、传播介质和场地衰减特性等.本次工作重新挑选震例,对研究区的地震烈度衰减规律进行了统计回归分析,并与该地区已有的地震烈度衰减关系进行认真的比较分析.     

Modelling the effects of temperature and food on individual growth and reproduction of Daphnia and their consequences on the population level

Individual based simulations of population dynamics require the availability of growth models with adequate complexity. For this purpose a simple-to-use model (non-linear multiple regression approach) is presented describing somatic growth and reproduction of Daphnia as a function of time, temperature and food quantity. The model showed a good agreement with published observations of somatic growth (r² = 0.954, n = 88) and egg production (r² = 0.898, n = 35). Temperature is the main determinant of initial somatic growth and food concentration is the main determinant of maximal body length and clutch size. An individual based simulation was used to demonstrate the simultaneous effects of food and temperature on the population level. Evidently, both temperature and food supply affected the population growth rate but at food concentrations above approximately 0.4 mg Cl⁻¹ Scenedesmus acutus temperature appeared as the main determinant of population growth.

Four simulation examples are given to show the wide applicability of the model: (1) analysis of the correlation between population birth rate and somatic growth rate, (2) contribution of egg development time and delayed somatic growth to temperature-effects on population growth, (3) comparison of population birth rate in simulations with constant vs. decreasing size at maturity with declining food concentrations and (4) costs of diel vertical migration. Due to its plausible behaviour over a broad range of temperature (2–20 °C) and food conditions (0.1–4 mg Cl⁻¹) the model can be used as a module for more detailed simulations of Daphnia population dynamics under realistic environmental conditions.     

Decoupled seismic analysis of an earth dam

The seismic stability of an earth dam is evaluated via the decoupled displacement analysis using the accelerograms obtained by ground response analysis to compute the earthquake-induced displacements. The response analysis of the dam is carried out under both 1D and 2D conditions, incorporating the non-linear soil behaviour through the equivalent linear method. Ten artificial and five real accelerograms were used as input motions and four different depths were assumed for the bedrock.1D and 2D response analyses were in a fair agreement with the exception of the top third of the dam where only a 2D modelling of the problem could ensure that the acceleration field is properly described. The acceleration amplification ratio obtained in the 2D analyses was equal to about 2 in all the cases considered, consistently with data from real case histories.The maximum permanent displacements computed by the sliding block analysis were small, being less than 10% of the service freeboard; a satisfactory performance of the dam can then be envisaged for any of the seismic scenarios considered in the analyses.     

Asymmetric one‐storey elastic systems with non‐linear viscous and viscoelastic dampers: Simplified analysis and supplemental damping system design

Investigated is the accuracy in estimating the response of asymmetric one‐storey systems with non‐linear viscoelastic (VE) dampers by analysing the corresponding linear viscous system wherein all non‐linear VE dampers are replaced by their energy‐equivalent linear viscous dampers. The response of the corresponding linear viscous system is determined by response history analysis (RHA) and by response spectrum analysis (RSA) extended for non‐classically damped systems. The flexible and stiff edge deformations and plan rotation of the corresponding linear viscous system determined by the extended RSA procedure is shown to be sufficiently accurate for design applications with errors generally between 10 and 20%. Although similar accuracy is also shown for the ‘pseudo‐velocity’ of non‐linear VE dampers, the peak force of the non‐linear VE damper cannot be estimated directly from the peak damper force of the corresponding linear viscous system. A simple correction for damper force is proposed and shown to be accurate (with errors not exceeding 15%). For practical applications, an iterative linear analysis procedure is developed for determining the amplitude‐ and frequency‐dependent supplemental damping properties of the corresponding linear viscous system and for estimating the response of asymmetric one‐storey systems with non‐linear VE dampers from the earthquake design (or response) spectrum. Finally, a procedure is developed for designing non‐linear supplemental damping systems that satisfy given design criteria for a given design spectrum. Copyright © 2003 John Wiley & Sons, Ltd.     

A unified formulation of the piecewise exact method for inelastic seismic demand analysis including the P‐delta effect

The non‐linear analysis of single‐degree‐of‐freedom (SDOF) systems provides the essential background information for both strength‐based design and displacement‐based evaluation/design methodologies through the development of the inelastic response spectra. The recursive solution procedure called the piecewise exact method, which is efficiently used for the response analysis of linear SDOF systems, is re‐formulated in this paper in a unified format to analyse the non‐linear SDOF systems with multi‐linear hysteresis models. The unified formulation is also capable of handling the P‐delta effect, which generally involves the negative post‐yield stiffness of the hysteresis loops. The attractiveness of the method lies in the fact that it provides the exact solution when the loading time history is composed of piecewise linear segments, a condition that is perfectly satisfied for the earthquake excitation. Based on simple recursive relationships given for positive, negative and zero effective stiffnesses, the unified form of the piecewise exact method proves to be an extremely powerful and probably the best tool for the SDOF inelastic time‐history and response spectrum analysis including the P‐delta effect. A number of examples are presented to demonstrate the implementation of the method. Copyright © 2003 John Wiley & Sons, Ltd.     

A rooftop tuned mass damper frame

This article documents the analytical study and feasibility of placing a tuned mass damper in the form of a limber rooftop moment frame atop relatively stiff structures to reduce seismic acceleration response. Six existing structures were analytically studied using a suite of time history and response spectra records. The analyses indicate that adding mass in conjunction with a limber frame results in an increase in the fundamental period of each structure. The fundamental period increase generally results in a decrease in seismic acceleration response for the same time history and response spectra records. Owing to the limber nature of the rooftop frames, non‐linear analysis methods were required to evaluate the stability of the rooftop tuned mass damper frame. The results indicate the addition of a rooftop tuned mass damper frame reduces the seismic acceleration response for most cases although acceleration response can increase if the rooftop frame is not tuned to accommodate the specific structure's dynamic behaviour and localized soil conditions. Appropriate design of the rooftop tuned mass damper frame can result in decreased seismic acceleration response. This translates to safer structures if used as a retrofit measure or a more economical design if used for new construction. Copyright © 2003 John Wiley & Sons, Ltd.