Limitations of suction‐controlled triaxial tests in the characterization of unsaturated soils

Behavior of unsaturated soils is influenced by many factors, and the influences of these factors are usually coupled together. Suction‐controlled triaxial (SCTX) tests are considered to allow researchers to investigate influences of individual variables on unsaturated soils under specified stress path with controls of stresses, pore water, and air pressures. In the past 50 years, SCTX testing method has been established as a standard approach to characterize constitutive behavior of unsaturated soils. Most important concepts for modern unsaturated soil mechanics were developed upon results from the SCTX tests. Among these, one of the most important contributions in the constitutive modeling of elasto‐plastic behavior for unsaturated soils is the Barcelona basic model (BBM) proposed by Alonso et al. in 1990. The BBM successfully explained many features of unsaturated soils and received extensive acceptance. However, the SCTX tests are designed based upon the divide‐and‐conquer approach in which an implicit assumption is used: soil behavior is stress‐path independent. However, it is well‐established that unsaturated soil behavior is elasto‐plastic and stress‐path dependent. It is found that the SCTX tests in fact cannot control the stress path of an unsaturated soil during loading. This incapability, in combination with complicated loading/collapse behavior of unsaturated soils, makes the SCTX tests for characterizing unsaturated soil questionable. This paper discusses the limitations of the SCTX tests in the characterization of unsaturated soils. A possible solution to the problem was proposed based on a newly developed modified state surface approach. The discussions are limited for isotropic conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

Stability analysis of tunnels driven in jointed rocks by means of a homogenized limit analysis approach

Conceived as a potential alternative to the classical design methods employed for analyzing the stability of underground structures driven in jointed rocks, the homogenization approach stems from the heuristic idea that, from a macroscopic point of view, a rock mass cut by a network of joints may be perceived as a homogenized continuum. The strength properties of the latter can be theoretically obtained from the failure conditions of its individual constituents: rock matrix and joint interfaces. At the material level, the limit analysis reasoning is used in the context of homogenization to formulate the homogenized strength criterion of a jointed rock mass in the particular situation of a single set of parallel joints. As it could be expected, the obtained closed‐form expressions show the strength anisotropy induced by joint preferential orientation. The support functions (π functions) associated with the homogenized strength criterion are also determined in both plane strain and three‐dimensional cases. This criterion is then applied to the investigation of stability analysis of a tunnel excavated in a jointed rock mass. Upper bounds estimated of the stability factor are derived from the implementation of the kinematic approach directly on the homogenized underground structure. Finally, the approach is applied to analyze and discuss the collapse of the Pinheiros subway station (São Paulo, Brazil). Copyright © 2014 John Wiley & Sons, Ltd.     

Three‐dimensional shakedown solutions for anisotropic cohesive‐frictional materials under moving surface loads

Previous work on three‐dimensional shakedown analysis of cohesive‐frictional materials under moving surface loads has been entirely for isotropic materials. As a result, the effects of anisotropy, both elastic and plastic, of soil and pavement materials are ignored. This paper will, for the first time, develop three‐dimensional shakedown solutions to allow for the variation of elastic and plastic material properties with direction. Melan's lower‐bound shakedown theorem is used to derive shakedown solutions. In particular, a generalised, anisotropic Mohr–Coulomb yield criterion and cross‐anisotropic elastic stress fields are utilised to develop anisotropic shakedown solutions. It is found that shakedown solutions for anisotropic materials are dominated by Young's modulus ratio for the cases of subsurface failure and by shear modulus ratio for the cases of surface failure. Plastic anisotropy is mainly controlled by material cohesion ratio, the rise of which increases the shakedown limit until a maximum value is reached. The anisotropic shakedown limit varies with frictional coefficient, and the peak value may not occur for the case of normal loading only. Copyright © 2013 John Wiley & Sons, Ltd.     

Elastoplastic model with loading memory surfaces (LMS) for monotonic and cyclic behaviour of geomaterials

A new elastoplastic model called loading memory surface based on the critical state concept and the multi‐surface framework is proposed for geomaterials. The model uses a hypoelastic formulation and two plastic mechanisms. The formulations of the model are made in three‐dimensional stress–strain space and work under both monotonic and cyclic loadings. A newly introduced formalism makes it possible to obtain the cyclic response directly from the monotonic loading one. This formalism gives a three‐dimensional generalization of the well‐known Masing rule. The model has been validated against test results of Hostun sand under several conditions: monotonic and cyclic, drained and undrained, tests in compression and in extension, and at different confining pressures and different densities. Copyright © 2014 John Wiley & Sons, Ltd.     

Higher tritium concentrations measured in permafrost thaw lakes in northern Alberta

Tritium concentrations were measured in a survey of 24 lakes, 15 wetlands, and 133 groundwaters in the oil sands region of northeastern Alberta and compared with both recent precipitation and precipitation sampled during the 1960s tritium peak caused by atmospheric thermonuclear weapons testing. Water samples from lakes included a group of 14 thaw lakes that had higher runoff attributed to melting of permafrost in peat plateaus within their watersheds. While tritium in all lakes was found to be intermediate between recent and 1960s concentrations, the thaw lakes were found to be significantly enriched in tritium compared with other lakes, as were unfrozen wetlands characterized by a thick sequence of low‐hydraulic conductivity peat. The results provide further evidence of different water sources to the thaw lakes and may indicate that melting of modern permafrost in part formed since the 1950s is occurring in these systems. Copyright © 2015 John Wiley & Sons, Ltd.     

Cracking risk of partially saturated porous media—Part I: Microporoelasticity model

Drying of deformable porous media results in their shrinkage, and it may cause cracking provided that shrinkage deformations are hindered by kinematic constraints. This is the motivation to develop a thermodynamics‐based microporoelasticity model for the assessment of cracking risk in partially saturated porous geomaterials. The study refers to 3D representative volume elements of porous media, including a two‐scale double‐porosity material with a pore network comprising (at the mesoscale) 3D mesocracks in the form of oblate spheroids, and (at the microscale) spherical micropores of different sizes. Surface tensions prevailing in all interfaces between solid, liquid, and gaseous matters are taken into account. To establish a thermodynamics‐based crack propagation criterion for a two‐scale double‐porosity material, the potential energy of the solid is derived, accounting—in particular—for mesocrack geometry changes (main original contribution) and for effective micropore pressures, which depend (due to surface tensions) on the pore radius. Differentiating the potential energy with respect to crack density parameter yields the thermodynamical driving force for crack propagation, which is shown to be governed by an effective macrostrain. It is found that drying‐related stresses in partially saturated mesocracks reduce the cracking risk. The drying‐related effective underpressures in spherical micropores, in turn, result in a tensile eigenstress of the matrix in which the mesocracks are embedded. This way, micropores increase the mesocracking risk. Model application to the assessment of cracking risk during drying of argillite is the topic of the companion paper (Part II). Copyright © 2009 John Wiley & Sons, Ltd.     

利用Abel-Poisson径向基函数模型化局部重力场

多种类型高分辨率重力场数据的不断增加,使得在局部范围内精化重力场模型成为了可能。本文采用Abel-Poisson核将重力场量表示成有限个径向基函数线性求和的形式,对局部区域的多种重力场数据进行联合建模。为了提高运算速度,运用了基于自适应精化格网算法的最小均方根误差准则(RMS)来求解径向基函数平均带宽。以南海核心地区为例,联合两种不同类型、不同分辨率的重力场资料(大地水准面起伏6'×6'、重力异常2'×2'),构建了局部区域高分辨率的重力场模型。所建模型表示的重力场参量达到了2'×2'的分辨率,对原始的重力异常数据(2'×2')拟合的符合程度达到±0.8×10-5m/s2。结果表明,利用径向基函数方法进行局部重力场建模,避免了球谐函数建模收敛慢的问题,有效提高了模型表示重力场的分辨率。     

陕北风沙区含砾石工程堆积体坡面产流产沙试验

采用室内人工模拟降雨方法,研究了陕北风沙区含砾石工程堆积体边坡的产流产沙过程。结果表明:①砾石存在改变了坡面入渗速率,径流系数受入渗速率的影响,随砾石含量的增加先线性递减后线性递增,并在10%砾石含量处存在阈值;径流系数随降雨强度的增加线性递增。②含砾石堆积体坡面流速较纯土堆积体降低,且随雨强增大,砾石延缓径流流动的作用越显著;雨强对径流流速的影响随砾石含量增加持续减弱。③土壤剥蚀率在产流24~33 min后显著增加,砾石主要对显著增加后的平均剥蚀率产生影响。④雨强1.0 mm/min时,砾石存在促进降雨侵蚀,产沙量增大;雨强大于1.0 mm/min时,砾石具有显著的减沙效应。     

SoFISHticated policy – social perspectives on the fish conflict in the Northeast Atlantic

Ecosystem changes currently question the traditional allocation of fishing rights and quotas in the fishery of Northeast Atlantic mackerel and Norwegian spring-spawning herring in the Northeast Atlantic. Variability in the distribution of these highly migratory species escalated in a political conflict between member states of the European Union, Iceland, the Faroe Islands and Norway, which is a driving force for unsustainable fishery. The aim of this paper is to investigate this conflict by outlining the social understandings of diverse stakeholders by using the Q methodology. The method reduced the complexity of numerous opinions, detected four distinct perspectives and simultaneously categorised the participating stakeholders. Although the perspectives differ in various elements, the protection of economic interests seems to dominate over the quest for sustainability. The call of all stakeholders in this study to clarify the fishing rights in the Northeast Atlantic reveals a clear deficiency of the current international fishery management in handling abrupt ecological changes and the necessity to acknowledge this as a complex adaptive system.     

1991—2015年三江源河曲高寒草甸干湿状况及牧草产量变化的气候归因研究

以三江源东部河曲高寒草甸为研究对象,通过分析1991—2015年气温、降水、潜在蒸散、湿润指数和牧草产量变化特征,探讨了地区干湿状况对牧草产量的影响。研究表明：1991—2015年河曲高寒草甸潜在蒸散以3.5 mm·a^-1的速率增加（P<0.01）,在年降水量按2.3 mm·a^-1呈非显著性（P>0.05）增加的趋势下,地区干湿状况基本保持平稳（多年均值为0.52）,隶属于半湿润气候区。25年来牧草干重产量平均为303.7 g·m^-2,并以3.0 g·m^-2·a^-1的速率下降。分析牧草产量与影响干湿状况的气候因素之间的相关性发现,气温对牧草产量影响不明显（P>0.05）,降水量表现为正相关关系（P>0.10）,说明该区域降水是牧草产量提高与否的主导因素;牧草产量与潜在蒸散表现为负相关关系（P>0.10）,与湿润指数表现为正相关关系（P>0.10）;在生长季时期,牧草产量与降水量、潜在蒸散和湿润指数的相关性关系达到了显著水平（P<0.10）,说明牧草产量在生长季对地区环境条件湿润与否较为敏感。