FBX三维模型自动转换为OBJ三维模型方法研究

本文研究实现了一种FBX三维模型自动转换为OBJ三维模型的方法,包括几何信息和材质信息的自动转换,所述方法包括获取数据、几何信息处理、材质信息处理、OBJ格式输出和材质库文件输出等步骤。     

IEC的风机选型参数估算方法在中国的适用性研究

国际电工委员会编制的《风力发电机组设计要求》(IEC 61400-1)推荐了针对风电机组安全等级评估的极端风速和湍流强度特征值估算方法,因其简单便捷,在风电领域被广泛采用。利用全国风能资源专业观测网的193座测风塔观测数据,对IEC推荐的极端风速计算方法与我国规范推荐的基于极值I型概率分布方法进行比较,发现两种方法计算的193座塔70 m高度层50年一遇10 min平均最大风速,仅有7座测风塔较为一致,差异在±1%;IEC推荐方法的计算结果多数偏小,其中偏小10%以上的测风塔有121座,偏小30%以上的有44座测风塔,而偏大10%以上的只有9座测风塔;IEC方法计算的极值风速大幅度偏小的测风塔主要分布在台风影响的东南沿海地区,偏差较小的测风塔主要分布在西北和华北地形平缓区域,但同时偏大10%以上的测风塔也多分布在这一地区。以目前行业领域普遍采用的以15 m·s~(-1)风速的平均湍流强度作为风电机组选型指标,与严格按照规范,以15 m·s~(-1)风速段所有样本湍流强度的90%分位数处的值作为指标进行风电机组等级确定作对比,发现193座塔中有46座塔的选型是不安全的,甚至相差两个等级。     

Axial friction response of full-scale pipes in soft clays

The axial friction response of subsea pipelines in soft clays is a very important aspect for designers of subsea pipelines but the response is not well understood so far. There is a pressing need for the comprehension of the response. In this paper, model tests are performed using full-scale pipes coated with polyethylene (PE) to study the effects of the set-up period, the pipe diameter, the buried depth of the pipe, the shear strength of soft clays and the loading rate on the axial friction response of pipelines in soft clays. The variations of the axial friction coefficient are analyzed using the effective stress method based on model test results. The results show that the axial friction resistance increases with the increasing pipe diameter but the effect of the pipe diameter on the axial friction coefficient can be neglected. The ultimate axial resistance also increases with the increase of the buried depth of pipelines, the undrained shear strength of soft clays and the loading rate. The axial friction coefficient increases with the increasing loading rate. However, the axial friction coefficient decreases with the increasing buried depth. The method to determine the axial friction coefficient is developed by analyzing model test results, which considers the effects of the diameter, the buried depth, the undrained shear strength of soft clays and the loading rate. The study results not only extend the industry data base but also supply a basis to determine the axial friction coefficient of PE-coated pipes in soft clays for ocean engineering geological investigations.     

Large scale three-dimensional seepage analysis model test and numerical simulation research on undersea tunnel

During the construction process of Qingdao Jiaozhou Bay Undersea Tunnel, the faults and other unfavorable geological discontinuities were often encountered. To study the water inrush mechanism in the faults, both physical model test and numerical analysis were carried out. The results of crown displacement and hydraulic pressure of the monitoring sections in the physical model and numerical model were analyzed in this paper. It was found that the displacement and hydraulic pressure in the process of tunnel construction are often interacted as both cause and effect, and the lower of hydraulic pressure is often accompanied with the growth of its displacement. The changing of the excavation disturbed zone during the excavation in the undersea tunnel was also studied. The results show that the excavation disturbed zone in fault is larger than that in surrounding rock mass, and the excavation disturbance effects in the filling type fault are both transient and persistent. When the displacement and hydraulic pressure in the undersea tunnel change sharply during excavation, there are relatively slow and continuous change trend of the displacement and hydraulic pressure. For practical purposes, to prevent water inrush in the undersea tunnel, more attentions should also be paid to the undersea tunnel after excavation.     

A new assessment model for evacuation vulnerability in urban areas

In the high-speed urbanization process of China, the urban population has been increasing significantly, leading to a high-density aggregation of population. However, the sharp increase in population density has not produced commensurate improvements in the road networks. On the contrary, the population increase induced a serious evacuation vulnerability, which cities experience during various hazards and catastrophic events. Therefore, research on evacuation vulnerability is important to urban planning. To assess the evacuation vulnerability, the optimal and worst scenarios should be considered because all possible evacuation plans occur between these extremes. However, most previous evacuation vulnerability studies are based on the worst-case scenario, only providing an upper bound of a potential evacuation assessment. To provide a more comprehensive theoretical basis for decision-makers to understand the consequences caused by all possible evacuations, this paper proposes an optimal evacuation vulnerability assessment model that provides the lower bound on potential evacuation difficulties. The model is solved by a stepwise spreading algorithm based on Graph Theory. Subsequently, to evaluate the effectiveness of the model, the study adopts the model to assess the evacuation capability of different road network topologies. A comparison with previous research was performed. The model was demonstrated in an application to the South Luogu Alley of Beijing, China. The significance of this paper is that the combination of our model with previous research may provide a more complete theoretical basis for an evacuation vulnerability assessment.     

模式内部变率引起的1.5℃和2℃升温阈值出现时间模拟的不确定性研究

模式内部变率是模拟结果不确定性的重要来源,然而它对于1.5℃和2℃升温阈值出现时间不确定性的影响尚不清楚。因此,基于耦合模式比较计划第五阶段(CMIP5)的多模式数据研究了模式内部变率对1.5℃和2℃升温阈值出现时间不确定性的影响以及对未来排放情景的敏感性。结果表明,模式内部变率对升温阈值出现时间模拟的影响与外强迫的影响相当,单个模式内部不同成员达到全球平均1.5℃或2℃增温的年份相差2~12年;其影响具有明显的空间差异,影响极大值出现在欧亚大陆以北洋面、白令海峡周围区域、北美东北部及其与格陵兰岛之间的海域、南半球高纬地区等;低排放情景下模式内部变率的影响大于高排放情景。     

基于数值预报模式的乡镇温度预报方法研究

利用2015年8月至2017年7月长兴岛站和交流岛站日最高气温、日最低气温实况资料,对ECMWF细网格2 m温度预报值和日本FSFE02(24 h地面形势场预报)、FSFE03(36 h地面形势场预报)进行了检验。结果表明:根据历史回归统计检验,ECMWF细网格模式24 h的2 m最高气温、最低气温预报效果显著,通过了0. 05信度显著性检验。对各月做相关分析,相关性均较好。利用前一日ECMWF细网格2 m温度预报值与长兴岛站实况差值,根据统计的ECMWF细网格2 m温度预报订正值,做出长兴岛站未来24 h的气温预报。交流岛站温度预报是在长兴岛站温度预报的基础上订正做出,经统计分析,交流岛站和长兴岛站的气温差值与地面形势场和风场有较好的对应关系,根据不同类型的地面形势场和风场订正值,做出交流岛站的温度预报。应用Matlab计算机语言的开发功能,提取ECMWF细网格2 m温度预报的最高、最低气温值,并录入当日长兴岛站和交流岛站最高、最低气温实况值,自动预报各站未来24 h最高气温、最低气温。创建可视化预报工作界面,实现乡镇温度预报自动化。     

基于WACCM+DART的临近空间SABER和MLS臭氧观测同化试验研究

本研究在WACCM+DART（Whole Atmosphere Community Climate Model,Data Assimilation Research Test-Bed）临近空间资料同化预报系统中加入SABER（Sounding of the Atmosphere using Broadband Emission Radiometry）和MLS（Microwave Limb Sounder）臭氧观测同化接口,并以2016年2月一次平流层爆发性增温（SSW）过程为模拟个例进行了SABER和MLS臭氧观测同化试验,得出以下结论:同化SABER和MLS臭氧体积浓度观测得出的WACCM+DART臭氧分析场能够较真实反映SSW期间北极上空平流层臭氧廓线随时间的演变特征,且与ERA5（Fifth Generation of ECMWF Reanalyses）再分析资料描述的臭氧变化特征具有很好的一致性;基于SABER和MLS臭氧观测的WACCM臭氧6 h预报检验表明同化臭氧观测对臭氧分析和预报误差的改善效果主要体现在南半球高纬平流层和北半球中高纬平流层中上层-中间层底部;基于ERA5再分析资料的WACCM+DART分析场检验表明同化SABER和MLS臭氧体积浓度资料可在提高北半球高纬地区上平流层-中间层底部臭氧场分析质量的同时减小该地区上平流层-中间层底部温度场和中间层底部纬向风场的分析误差;基于MLS臭氧资料的臭氧中期预报检验表明相对控制试验同化SABER和MLS臭氧体积浓度资料能更好改善0~5 d下平流层和中间层底部臭氧的预报效果。     

Latitudinal and Scan-dependent Biases of Microwave Humidity Sounder Measurements and Their Dependences on Cloud Ice Water Path

The relationship between differences in microwave humidity sounder(MHS)–channel biases which represent measured brightness temperatures and model-simulated brightness temperatures, and cloud ice water path(IWP) as well as the influence of the cloud liquid water path(LWP) on the relationship is examined. Seven years(2011–17) of NOAA-18 MHS-derived measured brightness temperatures and IWP/LWP data generated by the NOAA Comprehensive Large Array-data Stewardship System Microwave Surface and Precipitation Products System are used. The Community Radiative Transfer Model, version2.2.4, is used to simulate model-simulated brightness temperatures using European Center for Medium-Range Weather Forecasts reanalysis data as background fields. Scan-angle deviations of the MHS window channel biases range from-1.7 K to1.0 K. The relationships between channels 2, 4, and 5 biases and scan angle are symmetrical about the nadir. The latitudedependent deviations of MHS window channel biases are positive and range from 0–7 K. For MHS non-window channels,the latitudinal deviations between measured brightness temperatures and model-simulated brightness temperatures are larger when the detection height is higher. No systematic warm or cold deviations are found in the global spatial distribution of difference between measured brightness temperatures and model-simulated brightness temperatures over oceans after removing scan-angle and latitudinal deviations. The corrected biases of five different MHS channels decrease differently with respect to the increase in IWP. This decrease is stronger when LWP values are higher.     

GRAPES全球集合预报系统模式扰动随机动能补偿方案初步探究

为了体现次网格尺度能量升尺度转换过程中存在的不确定性, 文中将随机动能补偿(Stochastic Kinetic Energy Backscatter, SKEB)方案应用于GRAPES(Global/Regional Assimilation and Prediction System)全球集合预报系统(GRAPES-GEPS), 以更好地表征模式误差并且增大集合离散度。使用的SKEB方案基于具有一定时、空相关特征的随机型以及由数值扩散导致的局地动能耗散率来构造随机流函数强迫。并根据流函数与水平风速旋转分量的关系, 将SKEB方案中的流函数强迫转化为适用于GRAPES全球模式的水平风速扰动。结果表明, SKEB方案的使用一方面能够提高GRAPES对大气动能谱的模拟能力; 另一方面能够改善GRAPES-GEPS的集合离散度与集合平均误差的关系, 增加了集合离散度, 并在一定程度上减小了集合平均误差, 尤其是在热带地区这种改进更为显著。而且该方案使得热带地区连续分级概率评分(CRPS评分)显著减小。就降水预报而言, 从Brier评分与相对作用特征面积(AROC, Area under the Relative Operating Characteristics)的结果来看, SKEB方案有助于改善中国地区小雨[0.1 mm, 10 mm)、中雨[10 mm, 25 mm)与大雨[25 mm, 50 mm)量级降水的概率预报技巧, 而对暴雨[50 mm, ∞)量级降水预报技巧影响很小(24 h降水量)。总体上, 模式扰动随机动能补偿方案提高了GRAPES-GEPS的概率预报技巧。