陆相断陷盆地油气空间互补分布成因及分布范围的确定方法

为了研究陆相断陷盆地油气分布规律,在构造和地层-岩性油气藏、下伏和上覆调整油气藏之间空间分布关系研究的基础上,通过分析不同类型油气藏分布及形成条件之间关系,对陆相断陷盆地油气空间互补分布成因及分布范围的确定方法进行了研究。结果表明：油气聚集圈闭类型和侧向运移条件的差异是造成构造和地层-岩性油气藏平面互补分布的主要原因;反转断裂沟通与下伏油气藏调整程度是造成下伏与上覆调整油气藏剖面互补分布的主要原因。利用地层砂地比值大小可以确定构造和地层-岩性油气藏平面互补分布范围。当地层砂地比大于40%时,主要形成以构造为主的油气藏;当地层砂地比小于20%时,主要形成以地层-岩性为主的油气藏。利用下伏油气藏内反转断裂分布范围便可以确定出上覆调整油气藏范围,上覆调整油气藏分布范围即为其与下伏油气藏剖面互补分布范围。     

轮古东走滑断裂破碎带结构及与油气关系

利用最新处理完成的轮古东300 km2叠前深度偏移地震资料,多手段识别出轮古东气田发育3期4组断裂。断裂控制了裂缝走向与裂缝发育密度,裂缝主要为高角度(45°~75°)构造窄裂缝,沿裂缝存在溶蚀,走向主要为NESW。纵向上,一间房组裂缝发育密度最大(14条/100 m),其次为鹰山组(6条/100 m)和良里塔格组(4条/100 m);平面上,裂缝主要分布在主干断裂周边1 km范围内,随着距断裂距离增大,裂缝发育强度(裂缝线密度)呈指数降低。在此基础上,综合考虑主干断裂及伴生裂缝发育特征,将轮古东断裂破碎带平面上划分为"羽状破碎带、转换破碎带、斜列破碎带、复合破碎带"4种结构,羽状破碎带分布面积最广,是油气最富集的区域,是目前高效井的集中分布区,围绕羽状破碎带的钻探为走滑断裂控储控藏研究和寻找新的油气富集区域提供了新思路。     

江西中西部萍乐坳陷带西段微细浸染型金矿的控矿构造

萍乐坳陷带西段微细浸染型金矿的控矿构造包括武功伸展构造体系的高角度断层、近水平顺层拆离断层及伸展过程中派生的短轴背斜,它们组成一个构造网络,成为含金热液循环的良好通道。伸展构造体系浅层次脆性变形域控制着金矿田的分布;浅层次脆性伸展构造的根带和峰带控制着成金矿带的展布;伸展过程中派生的短轴背斜控制着金矿区的分布,而近水平顺层拆离断层与短轴背斜复合的背斜轴部则控制着金矿体。     

Extensional deformation structures within a convergent orogen: The Val di Lima low-angle normal fault system (Northern Apennines,Italy)

A low-angle extensional fault system affecting the non metamorphic rocks of the carbonate dominated Tuscan succession is exposed in the Lima valley (Northern Apennines, Italy). This fault system affects the right-side-up limb of a kilometric-scale recumbent isoclinal anticline and is, in turn, affected by superimposed folding and late-tectonic high-angle extensional faulting.The architecture of the low-angle fault system has been investigated through detailed structural mapping and damage zone characterization. Pressure-depth conditions and paleofluid evolution of the fault system have been studied through microstructural, mineralogical, petrographic, fluid inclusion and stable isotope analyses. Our results show that the low-angle fault system was active during exhumation of the Tuscan succession at about 180°C and 5 km depth, with the involvement of low-salinity fluids. Within this temperature - depth framework, the fault zone architecture shows important differences related to the different lithologies involved in the fault system and to the role played by the fluids during deformation. In places, footwall overpressuring influenced active deformation mechanisms and favored shear strain localization.Our observations indicate that extensional structures affected the central sector of the Northern Apennines thrust wedge during the orogenic contractional history, modifying the fluid circulation through the upper crust and influencing its mechanical behavior.     

Weakness and mechanical anisotropy of phyllosilicate-rich cataclasites developed after mylonites of a low-angle normal fault (Simplon Line,Western Alps)

The Simplon Fault Zone is a late-collisional low-angle normal fault (LANF) of the Western Alps. The hanging wall shows evidence of brittle deformation only, while the footwall is characterized by a c. 1 km-thick shear zone (the Simplon Fault Zone), which continuously evolved, during exhumation and cooling, from amphibolite facies conditions to brittle-cataclastic deformations. Due to progressive localization of the active section of the shear zone, the thermal-rheological evolution of the footwall resulted in a layered structure, with higher temperature mylonites preserved at the periphery of the shear zone, and cataclasites occurring at the core (indicated as the Simplon Line). In order to investigate the weakness of the Simplon Line, we studied the evolution of brittle/cataclastic fault rocks, from nucleation to the most mature ones. Cataclasites are superposed on greenschist facies mylonites, and their nucleation can be studied at the periphery of the brittle fault zone. This is characterized by fractures, micro-faults and foliated ultracataclasite seams that develop along the mylonitic SCC′ fabric, exploiting the weak phases mainly represented by muscovite and chlorite. Approaching the fault core, both the thickness and frequency of cataclasite horizons increase, and, as their thickness increases, they become less and less foliated. The fault core itself is represented by a thicker non-foliated cataclasite horizon. No Andersonian faults or fractures can be found in the footwall damage zone and core zone, whilst they are present in the hanging wall and in the footwall further from the fault. Applying a stress model based on slip tendency, we have been able to calculate that the friction coefficient of the Simplon Line cataclasites was <0.25, hence this fault zone is absolutely weak. In contrast with other fault zones, the weakening effect of fluids was of secondary importance, since they accessed the fault zone only after an interconnected fracture network developed exploiting the cataclasite network.     

青藏高原东北缘黄河黑山峡出口段阶地特征与断层活动

青藏高原东北缘黄河黑山峡出口地段夜明山 -长流水沟一带 ,黄河的河流阶地发育和保存的较好。阶地的形成不仅记录了青藏高原北部第四纪以来地壳的 7次隆升过程的特点 ,而且阶地的空间展布及其特征反映了断层F8(7) 和F2 0 1活动的特点。详细的观测研究表明F8(7) 以南发育并保存有 7级阶地 ,而F8(7) 和F2 0 1之间及F2 0 1以北仅保存有 5级阶地。所有的阶地都为基座阶地。其中Ⅰ和Ⅱ级阶地前缘在区内连续展布 ,横跨断层F8(7) 两侧的Ⅲ级阶地前缘仍保持连续 ,但阶地宽度陡然变宽 ,Ⅳ级阶地前缘即Ⅲ级阶地后缘左旋位移 15 0m左右。横跨断层F2 0 1两侧 ,Ⅱ级阶地宽度由 2 0 0m急剧变宽为 710m ,Ⅱ级以上阶地前缘左旋位移均在 4 0 0m左右。断层F8(7) 和F2 0 1两侧阶地宽度的变化和阶地前缘的左旋位移记录了断层F8(7) 和F2 0 1第四纪晚期活动的时空规律 ,为断层的活动性评价提供了良好的依据     

Simplified approach for design of raft foundations against fault rupture. Part Ⅰ: free-field

Over the past few decades, earthquake engineering research mainly focused on the effects of strong seismicshaking. After the 1999 earthquakes in Turkey and Taiwan, and thanks to numerous cases where fault rupture causedsubstantial damage to structures, the importance of faulting-induced deformation has re-emerged. This paper, along withits companion (Part Ⅱ), exploits parametric results of finite element analyses and centrifuge model testing in developing afour-step semi-analytical approach for analysis of dip-slip (normal and thrust) fault rupture propagation through sand, itsemergence on the ground surface, and its interaction with raft foundations. The present paper (Part Ⅰ) focuses on the effectsof faulting in the absence of a structure (i.e., in the free-field). The semi-analytical approach comprises two-steps: the firstdeals with the rupture path and the estimation of the location of fault outcropping, and the second with the tectonically-induced displacement profile at the ground surface. In both cases, simple mechanical analogues are used to derive simplifiedsemi-analytical expressions. Centrifuge model test data, in combination with parametric results from nonlinear finite elementanalyses, are utilized for model calibration. The derived semi-analytical expressions are shown to compare reasonably wellwith more rigorous experimental and theoretical data, thus providing a useful tool for a first estimation of near-fault seismichazard.     

二连断陷盆地群伸展构造系统及其发育的深部背景

二连盆地形成于侏罗纪到早白垩世期间,是东北亚断陷盆地系内的一个典型的盆岭式断陷盆地群,其内蕴藏丰富的煤和油气资源,综合分析了二连盆地油气勘探中积累的地质资料,系统地研究了与盆地形成有关的构造,并与北美西部盆岭省进行了对比,揭示了二连盆地宽裂陷作用和低拉伸率条件下的伸展构造系统。以上述研究和前人的研究成果为基础,探讨了盆地发育的深部背景。     

闽西北常口—南舟断裂带与萤石成矿关系

福建省区域地质调查队三分队在元坑幅及埔上幅１：５万区调中分别发现了将乐常口大型萤石矿和顺昌南舟萤石矿。两个矿床均位于常口－南舟北东向断裂带中，受其次级张性断裂直接控制，矿床成因类似。     

甘肃白银厂铜多金属矿田重磁异常及构造特征北大核心CSCD

甘肃白银厂铜多金属硫化物矿田是受陆缘弧环境火山机构及其同生断裂控制的典型火山岩赋矿块状硫化物矿床(VHMS)。为了进一步探讨该矿床重磁场特征及与构造和矿床的关系,通过对区内的重磁场异常数据进行位场分离、小波分析和基于张量数据的三维欧拉反褶积自动确定地质体位置和埋藏深度的定量反演计算。结果表明,研究区布格重力场具有西部高、东部低的特征,其磁场可划分为4个磁场区;局部异常按一定分布规律呈圆形或似圆形正负相间分布,不同尺度的重磁细节异常图在一定程度上反映出引起重磁异常的地质异常体具有一定的延深且分布稳定,而且这些地质异常体具有向深部复合的趋势。经位场分离后正负相间的剩余重磁异常分布范围和分布特征大致反映了白银厂奥陶纪中酸性火山岩建造构造为一个继承性的火山穹窿构造,东、西部不同的重磁异常特征说明东西部的火山喷发具有不同的基底、源区和喷发方式。发育NW向、NE向、近NS向、NEE向等4组断裂构造,近NS向断裂F3、F4、F5、F6、F7形成时间稍晚于NEE向断裂,其与NEE向断裂F1、F2共同形成了研究区棋盘网格状的构造分布特征,这两组断裂为研究区内主要的控岩、控矿断裂。火山机构的分布明显受断裂构造控制,火山口集中分布在深大断裂、大断裂或两组断裂的交汇处。矿田内各矿床及成矿有利地段均处于研究区中部低缓重磁异常场内正负磁异常变化的梯度带内。本次研究为控矿要素研究和开展找矿预测工作提供了丰富、翔实的地球物理资料。