多导体柱微波成像的连续编码遗传算法

提出一种能同时重建多个二维良导体目标外形轮廓的新方法——连续编码遗传算法．将目标的横截面轮廓近似表达为三角级数形式,由边界条件得到一积分方程组,在此基础上将成像问题转化为约束优化问题,级数的各项系数为待优化量．积分方程组为约束条件,目标函数定义为实际测量的散射场与反演过程中得到的散射场之间的相对误差函数．采用连续编码遗传算法求解,优化过程通过选择、交叉、变异等遗传操作的选代而实现,待优化目标函数进行线性变换并采用模拟退火原理确定目标后表达为适应度函数,采用联赛选择与比例选择相结合的选择机制和单点交叉方式,变异操作通过对基因施加微小随机扰动实现．上一代中适应度最高的个体直接保留．数值模拟反演实验验证了方法的有效性．与其他反演方法相比,本法具有简单、通用、鲁棒性强等特点．     

风云三号卫星微波观测的临近空间大气扰动特征

风云三号C星(FY-3C)同时装载有设置了50～60GHz和118.75GHz附近氧气吸收带内通道的微波大气垂直探测器,可以用于监测临近空间下部的大气温度.本文的首要目的是展示FY-3C微波大气垂直探测器在监测临近空间(尤其是平流层)强重力波扰动中的优势特点.在给出平流层强扰动监测结果的基础上,分析了不同波段不同通道监测平流层大气温度扰动的能力.随后,对比分析了FY-3C大气温度探测通道与国外同类仪器在观测平流层扰动中的异同点,并进一步讨论了不同平台相同大气微波探测通道联合分析平流层扰动过程的能力.本文在统计2013年冬季(2012年12月和2013年1、2月)和2014年夏季(2014年6、7、8月)的微波大气垂直探测器观测的全球平流层扰动出现频率分布的基础上,利用FY-3C微波大气温度探测器分析了格陵兰岛附近2014年1月7—11日一次平流层扰动过程.结果表明,FY-3C微波探测器50～60GHz和118.75GHz波段可用于获取平流层不同高度上的大气温度扰动特征,且前一波段的探测能力显著地优于后一波段.随后,针对2014年1月11日拉布拉多半岛附近的平流层强扰动过程,基于FY-3C的MWTS-Ⅱ与METOP-B的AMSU-A的对比观测表明,MWTS-Ⅱ能够揭示平流层波动更细致的水平结构特征.最后,针对2014年8月10日安第斯山脉附近不同平台仪器的相同通道探测结果的分析表明,多平台联合观测可以进一步提高平流层强扰动监测的时间分辨率.     

基于亚马逊热带雨林的微波辐射计定标基准分析

亚马逊热带雨林作为稳定地物目标,适合进行星载微波辐射计的外定标。但近些年亚马逊热带雨林受人为破坏严重,植被覆盖面积减少,植被覆盖率降低,适合进行外定标的区域较往年发生了变化。文中依据亚马逊热带雨林近些年的归一化植被指数(NDVI)的变化情况,发现纬度位于3°S^2°N,经度位于74°W^69°W范围内的区域植被覆盖率高,适合进行星载微波辐射计外定标。文中以AMSR2 L1R亮温数据为基准,对比分析了该区域在2015-2017年3 a的亮温变化趋势,并以此作为该区域的定标基准。分析发现,该区域在非厄尔尼诺事件期间的亮温变化趋势呈现出特定的季节变化规律:在每年的6-7月,亮温值达到最低;在11-12月,亮温值达到最高,7-11月波动上升,12-6月波动下降。在厄尔尼诺事件发生期间会出现亮温值异常现象。     

Prediction of L-band signal attenuation in forests using 3D vegetation structure from airborne LiDAR

In this study, we propose a novel method to predict microwave attenuation in forested areas by using airborne Light Detection and Ranging (LiDAR). While propagating through a vegetative medium, microwave signals suffer from reflection, absorption, and scattering within vegetation, which cause signal attenuation and, consequently, deteriorate signal reception and information interpretation. A Fresnel zone enveloping the radio frequency line-of-sight is applied to segment vegetation structure occluding signal propagation. Return parameters and the spatial distribution of vegetation from the airborne LiDAR inside Fresnel zones are used to weight the laser points to estimate directional vegetation structure. A Directional Vegetation Density (DVD) model is developed through regression that links the vegetation structure to the signal attenuation at the L-band using GPS observations in a mixed forest in North Central Florida. The DVD model is compared with currently-used empirical models and obtained better R² values of 0.54 than the slab-based models. Finally, the model is evaluated by comparing with GPS observations of signal attenuation. An overall root mean square error of 3.51 dB and a maximum absolute error of 9.38 dB are found. Sophisticated classification algorithms and full-waveform LiDAR systems may significantly improve the estimation of signal attenuation.     

A simple retrieval method of land surface temperature from AMSR-E passive microwave data—A case study over Southern China during the strong snow disaster of 2008

The analysis of the passive microwave radiance transfer equation certifies that there is a linear relationship between satellite-generated brightness temperatures (BT) and in situ observation temperature and that land surface temperature (LST) is largely influenced by vegetation cover conditions. Microwave polarization difference index (MPDI) is an effective indicator for characterizing the land surface vegetation cover density. Based on the analysis of LST models from AMSR-E BT with 6.9 GHz MPDI intervals at 0.04, 0.02 and 0.01, respectively, this paper developed a simplified LST regression model with MPDI-based five land cover types, combining observation temperatures from 86 meteorological observation stations. The study shows that smaller MPDI intervals can obtain higher accuracy of AMSR-E LST simulation, and that the combination of HDF Explorer and ArcGIS software was useful for automatically processing the pixel latitude, longitude and BT information from the AMSR-E HDF imagery files. The RMSE of the five LST simulation algorithms is between 1.47 and 1.92 °C, with an average LST retrieval error of 0.91–1.30 °C. Besides, only 7 polarization bands and 5 land surface types are required by the proposed simplified model. The new LST simulation models appears to be more effective for producing LST compared to past most studies, of which the accuracy used to be more than 2 °C. This study is one of the rare applications that combine the meteorological observation temperature with MPDI to produce the LST regression analysis algorithms with less RMSE from AMSR-E data. The results can be referred to similar areas of the world for LST retrieval or land surface process research, in particular under extreme bad weather conditions.     

Degradation of Reactive Brilliant Red X‐3B Dye by Microwave Electrodeless UV Irradiation

Degradations of reactive brilliant red X‐3B solution by both conventional UV irradiation and microwave electrodeless UV irradiation were investigated. Degradation processes were studied by UV–VIS spectrophotometry, total organic carbon (TOC), high performance capillary electrophoresis (HPCE), conductivity, pH value, and ion chromatography. The results of color removal (%) and TOC removal (%) showed that the degradation by microwave electrodeless UV irradiation was more effective than by conventional UV irradiation. The results of UV–VIS absorption spectra and HPCE analyses indicated that the degradation of reactive brilliant red X‐3B was occurred at the conjugation system first, the benzene ring and the naphthalene ring later. The reactive brilliant red X‐3B was cleaved into some new small compounds and eventually most of the organic substances were mineralized to CO₂ and H₂O. The results of the conductivity analysis suggested that the degradation has mainly occurred in the first 40 min of reaction. The pH value of reactive brilliant red X‐3B solution was decreased first and then was increased. The results of inorganic anions analysis hinted that many of the N, Cl, and S elements from reactive brilliant red X‐3B were still attached in organic molecules.     

地表冻融过程被动微波遥感机理研究进展

地表冻融过程及参数特征是陆表过程、气候模式、全球变化等研究的重要方面。被动微波遥感由于具有对土壤水分敏感、高时间分辨率等特点,非常适合用于地表冻融过程的监测和相关参数的反演。在分析地表冻融过程被动微波遥感机理研究发展现状的基础上,面向全球范围内大尺度陆表冻融过程微波遥感算法发展的需求,针对由土壤、积雪和植被组合的复杂地...     

High Performance Corrugated Feed Horns for Space Applications at Millimetre Wavelengths

We report on the design fabrication and testing of a set of high performance corrugated feed horns at 30, 70, and 100 GHz, built as advanced prototypes for the Low Frequency Instrument (LFI) of the ESA Planck mission. The electromagnetic designs include linear (100 GHz) and dual shaped (30 and 70 GHz) profiles. Fabrication has been achieved by direct machining at 30 GHz and by electro-formation at higher frequencies. The measured performances on side lobe and return loss meet the stringent Planck requirements over the large (20%) instrument bandwidth. Moreover, the advantage in terms of main lobe shape and side lobe levels of the dual profiled designs has been demonstrated. This revised version was published online in July 2006 with corrections to the Cover Date.     

微波介电陶瓷BaO-Nd2O3-TiO2发展状况及探索

对高频高介的微波陶瓷 ,主要是性能优越的BaO Nd2 O3 TiO2 系统发展状况、现状和趋势进行综述介绍     

月壤厚度的主被动微波遥感研究

主被动微波遥感的探测技术是当前获取月壤厚度信息的重要手段。主动微波技术和被动微波技术在探测月壤厚度的物理机理、研究中使用的参数和考虑的关键问题等方面都有所不同。在总结了前人研究成果的基础上,系统分析了月壤厚度研究中需要着重考虑的参数分布,并详细探讨了主被动微波遥感技术获取月壤厚度的原理及研究中所涉及的关键问题。