甘肃省河西地区高层建筑动力特性脉动观测研究

采用脉动观测方法对甘肃省河西地区的武威皇台大厦,张掖电力大厦和张掖国税大厦３栋高层建设的自振特性进行测试。在分析３栋建筑的自振周期、振型和阻尼比时,结合对当地场地特性的分析,指出了河西地区对高层建设有利的场地条件以及今后在该地区修建以建筑时应注意的若干问题。     

大别山双河片麻状花岗岩岩体石英组构特征及应变分析

对大别山双河片麻状花岗岩岩体中的石英C轴组构、黑云母(001)解理极点和石英颗粒三维应变分别进行系统测量。结果显示,双河岩体在侵位和后期演化过程中以挤压变形为特点,岩体经过NW-SE向和NE-SW向两次挤压,NW-SE向挤压强度较大,奠定了岩体基本的构造形态。结合区域应力场特征分析得出,双河岩体在早三叠世至早侏罗世应力方位为NW-SE向挤压,中侏罗世及后期为NE-SW向挤压,应力场发生顺时针变化。      

Modeling coseismic displacements resulting from SAR interferometry and GPS measurements during the 1997 Umbria-Marche seismic sequence

In this study we analyse coseismic GPS displacements and DInSAR data to constrain a dislocation model for the three largest earthquakes of the 1997 Umbria-Marche seismic sequence. The first two events, which occurred on September 26 at 00:33 GMT (Mw 5.7) and 09:40 GMT (Mw 6.0) respectively, are investigated using both GPS displacements and DInSAR interferograms. We discuss and compare the results of previous studies which separately modeled a smaller subset of geodetic data. We provide a dislocation model for these two earthquakes which fits well both GPS and DInSAR data and agrees with the results of seismological and geological investigations. The first event consists of a unilateral rupture towards the southeast with a uniform dislocation. The strike, rake and dip angles are those resulting from the CMT solution. The second event consists of an unilateral rupture towards the northwest and a variable slip distribution on the fault plane. The strike and the rake are consistent with the CMT solution, but the dip angle has been slightly modified to improve the simultaneous fit of GPS and DInSAR data. While the second rupture (09:40 GMT) arrived very close to the surface, the fit to geodetic data shows that the first rupture (00:33 GMT) is deeper (2 km), despite the more evident surface geological effects. The analysis of new SAR interferograms allows the identification of a 5–6 cm additional displacement caused by the October 3 (Mw 5.2) and 6 (Mw 5.4) seismic events.We use data from a new DInSAR interferogram to model the displacement field of the Sellano earthquake of October 14, 1997. For this event significant GPS measurements were not available. We tested two different fault plane geometries: a blind, planar fault (top depth = 2.4 km), and a curved (listric) fault reaching the surface. The two models provide a generally similar fit to the data, and show that most of the slip was released at depths greater than 2.4 km along a gently dipping (40^°–45^°) fault surface. They also show that a unilateral rupture does not allow fitting the interferometric fringes since there is evident surface deformation to the northwest of the hypocenter. Moreover, we suggest that the concentration of high residuals in the southern part of our uniform slip model may in fact indicate a certain slip variability in this area.We conclude that, despite the moderate magnitudes and the lack of significant surface faulting, the space geodetic data allowed to constrain dislocation models giving new insights in the rupture process of the three largest events of the sequence.     

Experiments on the ocean sequestration of fossil fuel CO2: pH measurements and hydrate formation

We have carried out a series of in situ experiments to investigate the formation of a CO₂ hydrate (CO₂:5.75 H₂O) for the purpose of evaluating scenarios for ocean fossil fuel CO₂ disposal with a solid hydrate as the sequestered form. The experiments were carried out with a remotely operated vehicle in Monterey Bay at a depth of 619 m. pH measurements made in close proximity to the hydrate–seawater interface showed a wide range of values, depending upon the method of injection and the surface area of the hydrate formed. Rapid injection of liquid CO₂ into an inverted beaker to form a flocculant mass of hydrate resulted in pH initially as low as 4.5 within a few centimeters of the interface, decaying slowly over 1–2 h towards normal seawater values as dense CO₂ rich brine drained from the hydrate mass. In a second experiment, slower injection of the liquid CO₂ to produce a simple two-layer system with a near planar interface of liquid CO₂ with a thin hydrate film yielded pH values indistinguishable from the in situ ocean background level of 7.6. Both field and laboratory results now show that the dissolution rate of a mass of CO₂ hydrate in seawater is slow but finite.     

山东省矿产资源开发利用现状与保护对策探讨

山东是矿业大省,矿产资源的开发程度较高,但也存在着不容忽视的问题。针对产生这些问题的原因,提出了实现矿产资源可持续开发利用的六项建议,强调应从增强矿产资源的忧患意识、保护生态环境、加强矿产勘查、强化政府管理职能及依靠科技进步等方面加大工作力度。     

青岛市水环境问题及防治对策

青岛是我国缺水城市之一。但本已紧缺的水资源却存在着水质污染、开采漏斗、海（咸）水入侵及高氟水等一系列水环境问题。文中分析了其发生原因、危害程度及发展趋势,并提出了综合治理建议。     

山东省矿产资源的可持续利用概要

山东是矿业大省,矿产地质工作程度较高,但在国民经济中占有重要位置的４５ 种主要矿产仅有８ 种能满足２０１０ 年本省经济建设的需求。针对矿产资源勘查、开发存在的主要问题,提出了全省矿产资源可持续利用战略目标及相应的对策建议     

黑河流域临泽盐碱化草地网格尺度多层土壤水分时空稳定性分析

定量分析半干旱环境下盐碱化草地类型土壤水分的时间稳定性,是开展土壤水分尺度时空转换的前提,同时也是水文研究的重要组成部分。基于"黑河遥感—地面同步试验"干旱水文试验区临泽草地加密观测区16个土壤水分剖面的逐日持续观测数据,利用平均相对偏差及相关系数方法,对网格尺度上多层土壤水分的时间稳定性进行了分析。初步表明:①在土壤水分监测点布设上,在相对长的时期内,能代表网络水平上平均土壤水分最优观测的点是存在的,最优观测点位置的选择需要先密后稀,并根据事先的加密观测结果进行稳定性分析,保留平均相对偏差接近于0且其标准差最小的点开展长期观测。②在90 m×90 m的网格尺度上,土壤水分的空间结构在40 cm深度以上各层的时间稳定性是类似的,但稳定程度不同,表层最不稳定。在40 cm以下基本上趋于稳定,空间异质性降低。③研究区所在环境下网格尺度土壤水分空间分布在时间上强烈相关,观测刚开始的几天与其它时期的相关性比较低,在平稳期相关性较好,不稳定性主要由降水或灌溉事件引起。同时,由于环境的复杂性及观测的误差,这种特殊类型土壤水分的时间稳定特征还需要进一步研究。     

南极普里兹湾海冰厚度的电磁感应探测方法研究

本文介绍一种由EM31-ICE型电磁感应仪和激光测距仪组合而成的船载电磁感应海冰厚度探测系统. 针对海冰和海水的电学特征,运用电磁感应技术提取探测系统至海冰下底面的距离,运用激光测距仪测量冰面粗糙度和探测系统至海冰上表面的距离,两组数据结合,实现了海冰厚度的探测. 通过南极现场探测数据分析,并与钻孔实测冰厚数据对比研究,定量分析了探测系统距离冰面的高度效应,建立了该系统冰厚测定值随高度变化的修正关系式,并对船载航行数据进行了系统校正. 与SCAR ASPeCt的冰厚数据对比分析,表明该系统能够获得可靠的海冰厚度并具有较高的精度,且能满足对极区大范围海冰厚度观测的需求.