不同精制方法对鱿鱼（Ommastrephes bartrami）墨黑色素的微观形态、光谱特征及金属元素的影响

采用扫描电镜、光谱分析和元素分析法,进行了胃蛋白酶水解法、高速离心法和酸水解法精制的鱿鱼墨黑色素颗粒形态、紫外可见光谱、红外光谱及金属元素含量的研究。结果表明,酸水解法破坏了鱿鱼墨黑色素的颗粒结构;三种不同精制方法所得的鱿鱼墨黑色素在220nm附近均有强吸收。胃蛋白酶水解和酸水解法有效切除黑色素的氨基基团,但酸水解法下...     

Acid drainage from sulfides hosting gold mineralization (Furtei, Sardinia)

 The past mining activity for kaolin minerals left several abandoned quarries in the area of Furtei (southern Sardinia). Recently, gold mineralization has been found in association with intensely altered andesitic rocks, and an open-pit gold mine is expected to open in the near future. Twenty-one water samples were analyzed for a wide range of major and trace elements, in order to define the present hydrochemical situation before exploitation starts. Waters interacting with the altered andesitic rocks had higher salinity and metal concentrations than waters in contact with nonaltered rocks. Acid drainage and high concentrations of metals (Al, Fe, Mn, Zn, Cu, As) in solution were observed in waters leaching the mineral deposit. An environmental impact study is urgently called for since the waste material derived from the exploitation is expected to enhance acidification and metal-releasing processes, due to the increase in the specific yield, which favors the oxidation of sufide minerals. Received: 15 February 1995 · Accepted: 10 October 1995     

Scientific CMOS Pixels

High performance CMOS pixels are introduced; and their development is discussed. 3T (3-transistor) photodiode, 5T pinned diode, 6T photogate and 6T photogate back illuminated CMOS pixels are examined in detail, and the latter three are considered as scientific pixels. The advantages and disadvantages of these options for scientific CMOS pixels are examined. Pixel characterization, which is used to gain a better understanding of CMOS pixels themselves, is also discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Metal (Al, Fe, Mn and Cu) distributions and origins of polycyclic aromatic hydrocarbons (PAHs) in the surface sediments of the Marmara Sea and the coast of Istanbul, Turkey

In this study, total metal (Al, Fe, Mn and Cu) and PAHs analyses have been done in the surface sediments. Sediment samples have been collected from seven parts of the Marmara Sea and the coast of Istanbul during 2009. Total Al, Fe, Mn and Cu contents vary between 1.8% and 5.4%; 1.1% and 2.8%; 122 and 259 μg g⁻¹; 27 and 416 μg g⁻¹, respectively. EF and CF values of Fe and Mn are lower than 1.5 and 1, respectively, in all the stations. Total PAH contents range between 135 and 6009 ng g⁻¹ in the surface sediments. The origin of PAHs has been found pyrolitic according to the Phe/Ant ratio in the all stations. Contrastingly, at K0, MKC and MY1 Stations, PAH origins have been observed petrogenic according to the Flu/Pyr ratio.     

Removal of Heavy Metals from Synthetic Mixture as well as Pharmaceutical Sample Via Cation Exchange Resin Modified with Rhodamine B: Its Thermodynamic and Kinetic Studies

A new sorbent was prepared by loading rhodamine B on Amberlite IR‐120. Various physico‐chemical parameters such as effects of adsorbate concentration, contact time, pH, and temperature on the sorption of the dye have been studied. Thermodynamic parameters (ΔH° and ΔS°) were also evaluated for the sorption of dye. Kinetic studies revealed that the sorption of the dye was best fit for pseudo‐second‐order kinetic. The metal ion uptake in different solvent systems has been explored through column studies. On the basis of distribution coefficient (K_d), some heavy metal ions of analytical interest from binary mixtures have been separated. The limit of detection (LOD) for the Ni²⁺ and Fe³⁺ metal ions was 0.81 and 0.60 µg L^?1, and the limit of quantification (LOQ) was found to be 2.72 and 2.0 µg L^?1. This sorbent has also been successfully applied in the analysis of multivitamin formulation. The applicability of the modified resin in the separation of heavy metals constituting real and synthetic samples has been explored.     

Automatic 3D modelling of metal frame connections from LiDAR data for structural engineering purposes

The automatic generation of 3D as-built models from LiDAR data is a topic where significant progress has been made in recent years. This paper describes a new method for the detection and automatic 3D modelling of frame connections and the formation of profiles comprising a metal frame from LiDAR data. The method has been developed using an approach to create 2.5D density images for subsequent processing using the Hough transform. The structure connections can be automatically identified after selecting areas in the point cloud. As a result, the coordinates of the connection centre, composition (profiles, size and shape of the haunch) and direction of their profiles are extracted. A standard file is generated with the data obtained from the geometric and semantic characterisation of the connections. The 3D model of connections and metal frames, which are suitable for processing software for structural engineering applications, are generated automatically based on this file. The algorithm presented in this paper has been tested under laboratory conditions and also with several industrial portal frames, achieving promising results. Finally, 3D models were generated, and structural calculations were performed.     

Remediation of Iron,Manganese, and Organic Pollutants in Lignite‐Derived Water Using an Upflow Biological Aerated Filter

A large amount of lignite‐derived water is created during the process of refining lignite. The concentration of Fe, Mn, phenol, and some other organic pollutants of the lignite‐derived water is above the discharge permit or circulating cooling water reuse standard in China. A laboratory‐scale upflow biological aerated filter (UBAF) was developed to treat this lignite‐derived water. Three kinds of coke powders, as waste products in the coal chemical industry with 0.1–0.4 mm, 0.5–1.0 mm, and 1.0–2.0 mm in diameter, were tested as the UBAF's carrier materials. A comparative study of gas–water ratio for the UBAF is presented. The studies presented in this paper demonstrate that with coke powder diameter of 0.5–1.0 mm and gas/water ratio of 7:1, the UBAF reactor can achieve optimal removal efficiency. After the UBAF treatment, the removal efficiency of Fe, Mn, and phenol was found to be 38.4–62.5%, 56.6–74.3%, and 89.5–94.3%, respectively. The lignite‐derived water can meet the discharge permit to surface water and reuse standard for circulating cooling water after the treatment by UBAF. The coke powder, as a waste material, can be used as a support material for UBAF very well.     

Effects of Lime‐Based Waste Materials on Immobilization and Phytoavailability of Cadmium and Lead in Contaminated Soil

Low cost lime‐based waste materials have recently been used to immobilize metals in contaminated soils. This study was conducted to evaluate the effects of oyster shells and eggshells as lime‐based waste materials on immobilization of cadmium (Cd) and lead (Pb) in contaminated soil, as well as their effects on metal availability to maize plants (Zea mays L.). Oyster shells and eggshells were applied to soils at 1 and 5% w/w, after which they were subject to 420 days of incubation. The toxicity characteristic leaching procedure (TCLP) test was employed to determine the mobility of Cd and Pb in soils. The results showed that the addition of waste materials effectively reduced the metal mobility as indicated by the decrease in the concentration of TCLP‐extractable Cd and Pb, and this was mainly due to significant increases in soil pH (from 6.74 in untreated soil to 7.85–8.13 in treated soil). A sequential extraction indicated that the addition of such alkaline wastes induced a significant decline in the concentration of Cd in the exchangeable fraction (from 23.64% in untreated soil to 1.90–3.81% in treated soil), but it increased the concentration of Cd in the carbonate fraction (from 19.59% in untreated soil to 36.66–46.36% in treated soil). In the case of Pb, the exchangeable fraction was also reduced (from 0.67% in untreated soil to 0.00–0.01% in treated soil), and the fraction of Pb bound to carbonate was slightly increased (from 16.61% in untreated soil to 16.41–18.25% in treated soil). Phytoavailability tests indicated that the metal concentrations in the shoots of maize plant were reduced by 63.39–77.29% for Cd and by 47.34–75.95% for Pb in the amended soils, with no significant differences being observed for the amendment types and the application rates. Overall, these results indicate that oyster shells and eggshells can be used as low cost lime‐based amendments for immobilizing Cd and Pb in contaminated soils.