高速铁路地震监测系统中降低信号远程传输失真的技术探讨

当前信号远程传输方法,没有实现传输通道能量与传输通道信号并行,导致信号远程传输失真性较高。为提高地震信号远程传输的效率,提出新的高速铁路地震监测系统中信号远程传输技术。采用信号传输通道中地震信号能量的并行方法,通过信号传输通道中信号并行传输结构,实现信号在传输通道中双向传输;利用高频阻波电路阻断信号的高频载波通过谐振补偿电容,确保传输通道能量传输不受干扰;根据通道能量传输结构与信号传输过程,实现传输通道能量、信号并行,完成高速铁路地震信号远程传输中的失真控制。实验结果表明,所提方法丢包率较低,均值约为3%,远程传输时延仅为0.9s,是一种低误差、高效率的高速铁路地震信号远程传输方法。     

基于波形相似特征的微地震事件初至拾取及全局校正

微地震事件初至拾取是井下微地震监测数据处理的关键步骤之一.初至误差的存在会使微地震震源定位结果产生较大偏差,进而影响后续的压裂裂缝解释.通常初至拾取过程对所有的微地震事件选择相同的特征函数并采用一致的拾取参数进行统一处理,然而当事件的能量、震源机制、传播路径以及背景噪声等存在明显差异时,所得初至拾取结果差别显著.为了提高微地震事件初至拾取标准一致性,本文提出基于波形相似特征的初至拾取及全局校正方法.该方法首先利用互相关函数对每个事件内的各道记录进行时差校正,得到初始初至信息并形成叠加道,再对所有事件的叠加道进行全局互相关得到事件间初至相对校正量,最终初至结果可以通过各个事件的初始初至信息与其相对校正量相加得到.方法将所有微地震事件初至结果作为一个整体处理,从而能够克服常规方法初至拾取标准一致性差的缺陷.实际资料处理结果表明,相比于常规方法,该方法可以有效提高事件初至拾取和定位结果的一致性.     

地震观测仪器自动监控软件设计与实现

结合地震地球物理观测台网台站监测工作实际,研制一款地震观测仪器自动监控软件。该软件适用于不同网络环境下IP类仪器设备的网络实时或定时自动监控,地球物理观测类仪器时钟、状态和观测数据的定时自动监控,能自动识别当日观测数据中的无效数据、变幅异常、干扰、地震和限幅等信息,无需借助其他硬件和软件即可将告警信息以短信方式发送给值班人员和管理人员,可实现对仪器原始观测数据的自动备份和手动恢复,及对仪器的一键重启和校正时钟等控制类操作,无需跨平台操作即可查看当日观测数据曲线及分析数据的完整性和有效性,从而实现对仪器的统一高效管理。     

基于网络控制板的地震台站远程电源监控系统

针对无人值守地震台站逐年增加,运行维护模式不佳的现状,设计一种远程电源监控系统,采用远程电源控制模块,设计软件通过TCP/IP协议,在仪器出现死机时,远程实现设备的断电重启。本文对该系统的设计思路、硬件构成进行描述,并简要介绍软件功能设计、监控告警以及该系统在无人值守台站的应用。实践证明,该系统可有效解决因仪器死机造成的观测数据缺记,为地震专业设备的可靠运行和及时维护提供依据与保障,为今后地震台站,特别是无人值守台站的维护提供借鉴。     

基于HTML5+CSS3+jQuery Mobile的台站智能管理系统开发与实现

随着黑龙江省地震局省内运维任务越来越重,出现了运维管理模式无法优化资源配置,运维流程比较随意,设备缺乏数字化管理,运维人员有限等问题。为了解决实际工作问题,结合地震设备运维管理系统软件在黑龙江省区域运维中的应用,采用HTML5+CSS3+jQuery Mobile软件技术开发了一套基于移动端的设备管理系统,使用户可以同时用移动端与PC端,通过Web浏览器操作服务器,实现了区域运维中心对地震监测设备的统一数字化管理,提高了管理效率。     

基于地脉动噪声的呼伦贝尔地区监测能力研究

基于地脉动噪声计算方法,以呼伦贝尔市地震台网8个台站连续波形资料为基础,对地震观测台网监测能力进行评估,同时开展台网优化和科学布局研究。通过累计的历史噪声数据,用来评估台站观测环境的变迁,及时掌握地震监测能力的变化。该成果将为地震速报、重点地震危险区震情跟踪、强震后现场应急提供科学参考。     

大气程辐射遥感图像与城市大气污染监测研究

作为对地探测的遥感技术所获取的遥感图像包含了地面和大气信息,并且主要是地面信息.利用地面反射率分布图像将遥感数字图像中弱的大气信息与强的地面目标信息分离,生成仅仅包含大气信息的大气程辐射遥感图像.利用多(高)光谱遥感数字图像中不同波段的大气程辐射遥感图像可以不受地面干扰地对城市大气污染的类型和程度(气溶胶粒径和含量)进行遥感监测.在大气污染地面观测数据(可吸入颗粒物PM10浓度)的支持下,利用MODIS多光谱遥感数字图像生成的对应多光谱大气程辐射遥感数字图像,以上海市为例进行了城市大气污染遥感监测的原理方法研究.     

Acoustic and petrophysical properties of mechanically compacted overconsolidated sands: Part 2 – Rock physics modelling and applications

Part one of this paper reported results from experimental compaction measurements of unconsolidated natural sand samples with different mineralogical compositions and textures. The experimental setup was designed with several cycles of stress loading and unloading applied to the samples. The setup was aimed to simulate a stress condition where sediments underwent episodes of compaction, uplift and erosion. P-wave and S-wave velocities and corresponding petrophysical (porosity and density) properties were reported. In this second part of the paper, rock physics modelling utilizing existing rock physics models to evaluate the model validity for measured data from part one were presented. The results show that a friable sand model, which was established for normally compacted sediments is also capable of describing overconsolidated sediments. The velocity–porosity data plotted along the friable sand lines not only describe sorting deterioration, as has been traditionally explained by other studies, but also variations in pre-consolidation stress or degree of stress release. The deviation of the overconsolidated sands away from the normal compaction trend on the V_P/V_S and acoustic impedance space shows that various stress paths can be predicted on this domain when utilizing rock physics templates. Fluid saturation sensitivity is found to be lower in overconsolidated sands compared to normally consolidated sands. The sensitivity decreases with increasing pre-consolidation stress. This means detectability for four-dimensional fluid saturation changes can be affected if sediments were pre-stressed and unloaded. Well log data from the Barents Sea show similar patterns to the experimental sand data. The findings allow the development of better rock physics diagnostics of unloaded sediments, and the understanding of expected 4D seismic response during time-lapse seismic monitoring of uplifted basins. The studied outcomes also reveal an insight into the friable sand model that its diagnostic value is not only for describing sorting microtextures, but also pre-consolidation stress history. The outcome extends the model application for pre-consolidation stress estimation, for any unconsolidated sands experiencing similar unloading stress conditions to this study.     

CO2 saturation estimates at Sleipner (North Sea) from seismic tomography and rock physics inversion

CO₂ saturations are estimated at Sleipner using a two-step imaging workflow. The workflow combines seismic tomography (full-waveform inversion) and rock physics inversion and is applied to a two-dimensional seismic line located near the injection point at Sleipner. We use baseline data (1994 vintage, before CO₂ injection) and monitor data that was acquired after 12 years of CO₂ injection (2008 vintage). P-wave velocity models are generated using the Full waveform inversion technology and then, we invert selected rock physics parameters using an rock physics inversion methodology. Full waveform inversion provides high-resolution P-wave velocity models both for baseline and monitor data. The physical relations between rock physics properties and acoustic wave velocities in the Utsira unconsolidated sandstone (reservoir formation) are defined using a dynamic rock physics model based on well-known Biot–Gassmann theories. For data prior to injection, rock frame properties (porosity, bulk and shear dry moduli) are estimated using rock physics inversion that allows deriving physically consistent properties with related uncertainty. We show that the uncertainty related to limited input data (only P-wave velocity) is not an issue because the mean values of parameters are correct. These rock frame properties are then used as a priori constraint in the monitor case. For monitor data, the Full waveform inversion results show nicely resolved thin layers of CO₂–brine saturated sandstones under intra-reservoir shale layers. The CO₂ saturation estimation is carried out by plugging an effective fluid phase in the rock physics model. Calculating the effective fluid bulk modulus of the brine–CO₂ mixture (using Brie equation in our study) is shown to be the key factor to link P-wave velocity to CO₂ saturation. The inversion tests are done with several values of Brie/patchiness exponent and show that the CO₂ saturation estimates are varying between 0.30 and 0.90 depending on the rock physics model and the location in the reservoir. The uncertainty in CO₂ saturation estimation is usually lower than 0.20. When the patchiness exponent is considered as unknown, the inversion is less constrained and we end up with values of exponent varying between 5 and 20 and up to 33 in specific reservoir areas. These estimations tend to show that the CO₂–brine mixing is between uniform and patchy mixing and variable throughout the reservoir.     

云南测震台网地震监测能力分析

2018年1月云南省测震台网示范工程20个新增测震台建设完成,选取原有48个台以及新增20个台连续48小时数据记录,基于近震震级公式,计算并网前后云南省测震台网的地震监测能力,对比测震台增加前后的地震监测能力,发现:云南省地震监测能力由ML 2.2提升到ML 1.6,局部地区由ML1.4提升到ML0.8。