初论韧性断裂构造形成时限的研究方法

韧性断裂构造形成时限的研究自提出以来得到了一定程度的发展,目前的研究方法主要有反应速率法、扩散速率法和应变速率法3种。最近的研究表明,对同一韧性剪切带,应变速率法和有限应变测量法所得构造形成时限均以10⁴a为数量级,并且均随着糜棱岩化程度的增加而逐渐减小;不同韧性剪切带的构造形成时限也均以10⁴a为数量级,其差异是由构造动力学条件不同引起的。利用应变速率法所得构造形成时限具有较好的内部一致性,这在一定程度上表明利用应变速率法测定构造形成时限是可行的。在超薄片厚度、不活动组份、糜棱岩化温度和最适用古应力计等的确定上目前仍存在争议。文中还对体积因子和糜棱岩化程度等对求算构造形成时限的影响以及构造形成时限的发展方向进行了深入讨论。构造形成时限研究整体来说仍处于探索阶段,目前只能达到半定量的程度,有待进一步的深入细致的工作,同时也有待于显微构造地质学、构造岩石学等相关学科的进一步发展。     

地震科学数据共享工程

地震科学数据共享工程是在国家科技基础条件平台统一规划和管理下, 应用现代信息技术, 整合离散的地震科学数据资源, 构建面向全社会的网络化、 智能化的管理与共享服务体系, 实现数据采集、 加工、 保存的标准化、 规范化。 文中分析地震科学数据资源的现状, 介绍了地震科学数据共享工程的概况、 技术思路、 建设目标和实施步骤。     

基于GNSS资料分析漾濞MS6.4地震前应变时空演变特征

基于云南省内及邻区2009—2020年GNSS观测数据解算结果,在各个测点时间序列和速度场的基础上,采用克里金插值方法估计区域应变率场;以连续基准站时间序列为约束,获取漾濞M_S6.4地震近场区域的块体应变时间序列。分析发现:漾濞地震发生在前期最大剪应变高值区以及面应变高梯度带的张压转换区,发震的时间处于区域应变积累速率逐渐降低的过程之后。震中近场区域均以NW向断层的右旋走滑应变积累为主,且大多呈现持续增强趋势,与漾濞地震的发震断层走向及其破裂特征一致。震前震区东部块体出现了短期应变趋势转折及反向加速的异常现象,反映了应力-应变积累在接近临界破裂状态时的非线性调整。     

华北地区强震活动状态研究

华北地区历史强震活动频繁, 但自1998年张北6.2级地震后至今6级以上地震平静近22年。 大家对该区域未来6级以上地震危险趋势非常关注, 且有不同观点。 本文分析了该区6级以上地震活跃—平静周期性, 运用小波变换技术对周期成分进行了定量计算; 对比研究了活跃期与平静期之间的过渡阶段(本文称其为过渡幕)地震活动特点及其持续时间; 从1999—2018年地震应变释放率与第Ⅲ、 第Ⅳ活跃期、 第3平静期和第Ⅳ活跃期内第3、 第4平静幕的对比、 平静幕持续时间的统计特征、 当前华北地区显著的5级地震平静以及该区6级和7级以上地震前5级以上地震活动状态等方面进行了研究。 结果显示, 支持当前华北地区进入平静期的依据相对较多。     

Deposition of rheomorphic ignimbrite D (Mogán Formation), Gran Canaria, Canary Islands, Spain

 Rheomorphic ignimbrite D (13.4 Ma, Upper Mogán Formation on Gran Canaria), a multiple flow–single cooling unit, is divided into four major structural zones that differ in fabric and finite strain of deformed pyroclasts. Their structural characteristics indicate contrasting deformation mechanisms during rheomorphic flow. The zones are: (a) a basal zone (vitrophyre) with pure uniaxial flattening perpendicular to the foliation; (b) an overlying shear zone characterized by asymmetric fabrics and a significantly higher finite strain, with an ellipsoid geometry similar to stretched oblate bodies; (c) a central zone with a finite strain geometry similar to that of the underlying shear zone but without evidence of a rotational strain component; and (d) a slightly deformed to non-deformed top zone where the almost random orientation of subspherical pyroclasts suggests preservation of original, syn-depositional clast shapes. Rheomorphic flow in D is the result of syn- to post-depositional remobilization of a hot pyroclastic flow as shown by kinematic modeling based on: (a) the overall vertical structural zonation suggested by finite strain and fabric analysis; (b) the relation of shear sense to topography; (c) the interrelationship of the calculated vertical cooling progression at the base of the flow (formation of vitrophyre) and the related vertical changes in strain geometry; (d) the complex lithification history; and (e) the consequent mechanisms of deformational flow. Rheomorphic flow was caused by load pressure due to an increase in the vertical accumulation of pyroclastic material on a slope of generally 6–8°. We suggest that every level of newly deposited pyroclastic flow material of D first passed through a welding process that was dominated by compaction (pure flattening) before rheomorphic deformation started. Received: 25 June 1997 / Accepted: 28 October 1998     

西昌地震台压容应变仪观测数据的处理及效果检验

利用“八五”攻关成果提供的方法,对西昌地震台１９９５ ～１９９７ 年压容应变仪原始观测数据进行了处理．处理后的资料在武定６ ．５ 级、丽江７ ．０ 级等地震前显示了明显的短临异常信息     

Current Activity Characteristics of the Fault Zone Along the Northern Margin of West Qinling Range Revealed by GPS Measurementl

The fault zone along the northern margin of West Qinling Range is a major active fault zonein the key seismic monitoring area in the southeastern part of Gansu Province.In order tostudy the current activity characteristics of this fault,GPS monitoring network has beenarranged along both sides of the fault and 3 measurements have been made from 1996 to1998.The result indicates that obvious differential movement exists along the north and southsides of the fault and the eastward movement on the south side is 3.8mm/a larger than thaton the north side.In the GPS network,the shortened side is generally in the trend of EW andthe extended side is basically NW to SE.The principal compressional stress trend in this areais about EW and the sinistral motion is obvious in the eastern part of the fault(nearWushan).The measured results also indicate that the displacement rate has decreased by50% and the compressional strain has increased by 100% as compared the data of 1997～1998 with those of 1996～1997,which shows t     

应变异常分析与临震预报探讨

就库尔勒台用高精度RZB - 1型宽频带数字应变仪先后在 5 0 0km范围内记录到的几次较典型的MS5 .5左右地震的前兆异常作了初步分析与探讨 .结果发现 ,震前测值曲线异常形态虽说各有所不同 ,但却有一些共同的特征 :固体潮畸变 ,应变速率加快 ,易出现临震突跳 ,应变阶跃等 .根据这些特征 ,我们对 1 993年 2月 3日和静MS5 .7地震、1 993年 1 0月 2日若羌MS6 .6地震和 1 996年 1月 9日沙湾南MS5 .4地震作了不同程度的预报 .     

上海浦东国际机场建设中的测绘新技术应用

介绍了上海市浦东国际机场建设中测绘新技术的应用,为加快建立上海市城市系统和机场系统的地理信息数据库作出重要的保障,使机场运行后实施更科学更现代化的管理．     

Inverted metamorphism and the Main Central Thrust: field relations and thermobarometric constraints from the Kishtwar Window, NW Indian Himalaya

Following the early Eocene collision of the Indian and Asian plates, intracontinental subduction occurred along the Main Central Thrust (MCT) zone in the High Himalaya. In the Kishtwar–Zanskar Himalaya, the MCT is a 2 km thick shear zone of high strain, distributed ductile deformation which emplaces the amphibolite facies High Himalayan Crystalline (HHC) unit south‐westwards over the lower greenschist facies Lesser Himalaya. An inverted metamorphic field gradient, mapped from the first appearance of garnet, staurolite and kyanite index minerals, is coincident with the high strain zone. Petrography and garnet zoning profiles indicate that rocks in the lower MCT zone preserve a prograde assemblage, whereas rocks in the HHC unit show retrograde equilibration. Thermobarometric results derived using THERMOCALC indicate a P–T increase of c. 180 °C and c. 400 MPa across the base of the MCT zone, which is a consequence of the syn‐ to postmetamorphic juxtaposition of M1 kyanite grade rocks of the HHC unit on a cooling path over biotite grade footwall rocks, which subsequently attain their peak (M2) during thrusting. Inclusion thermobarometry from the lower MCT zone reveals that M2 was accompanied by loading, and peak conditions of 537±38 °C and 860±120 MPa were attained. M1 kyanite assemblages in the HHC unit, which have not been overprinted by M2 fibrolitic sillimanite, were not significantly affected by M2, and conditions of equilibration are estimated as 742±53 °C and 960±180 MPa. There is no evidence for dissipative or downward conductive heating in the MCT zone. Instead, the primary control on the distribution of peak assemblages, represented by the index minerals, is postmetamorphic ductile thrusting in a downward propagating shear zone. Polymetamorphism and diachroneity of equilibration are also important controls on the thermal profile through the MCT zone and HHC unit.