煤矿矿震应力窗口效应

对煤矿矿震活动特征,震源机制解,与天然地震的相关性以及特殊的环境条件等进行了研究,认为煤矿矿震的孕育和发生受控于区域应力场,具有区域应力变化的灵敏窗口效应,可视为探索天然地震前兆和区域应力场变化的应力窗口。     

东北地区近震震级研究

实际观测表明,用现行短周期仪器起算函数Ｒ１测算的近震震级ＭＬ在近距离地段数值偏低,在远距离地段偏高,随震中距出现系统偏差。本文以里克特（１９３５）零震级地震定义为震级水平控制原则,应用了辽,吉,黑,冀四省地震台网的观测资料,制定出东北地区近震震级起算函数系统。     

地震速报(Ms≥4.0)的震级校正——以伽师震群为例

1997年 1月 2 1日～ 1 999年 2月 2 8日 ,伽师发生了 Ms≥ 4 .0级地震 1 0 6次。通过分析对比速报和编目震级资料 ,发现速报震级偏差较大。应用线性拟合结合偏差分析的方法 ,对伽师震群速报震级进行了校正。通过对校正前后的结果比较以及 T假设检验 ,其效果相当理想     

Preliminary Analysis of the Relationship between the Magnitude Deviation of the Station and Site Response in the Fujian Digital Seismic Network

Using the records of 3,069 regional earthquake events from the Fujian Digital Seismic Network from October 2008 to December 2015,in which the magnitude of each of the events was measured by at least six stations,statistics are taken on the deviation between the magnitude of a single station and the average magnitude of the network. It is found that the magnitudes average deviation of each station is-0. 31-0. 68. Statistics are also taken for the period corresponding to the maximum amplitude of the record measured in each station for calculating the magnitude,and the dominant period gained is 0. 06s-0. 38s; site response of each seismic station is inverted using the Moya method,and it is found that the site response of 98 stations is in the bands of 1-20 Hz,suggesting that the site has an amplifying or suppressing effect on the signals in certain frequency bands;Considering the site response corresponding to the inherent 0. 8s period of the WoodAnderson pendulum seismograph,and comparing the magnitude deviation caused by the site response corresponding to the dominant period time of each station with the average magnitude deviation, we obtain that there is a good linear relationship between the magnitude deviation from the dominant period site response and the average deviation of the magnitude of each station,indicating that the magnitude deviation of a single station has a close relationship with the site response of the period corresponding to the maximum amplitude measured for calculating the magnitude.     

大同地震窗P波频散衰减的异常变化特征

通过测量介质品质因子来开展大同窗附近测震台站记录P波衰减频散特征的研究,并分析大同窗近场区和外围区震例前后的变化。对山自皂台记录的2001年以来大同窗地震序列的研究结果表明,近场区3次和外围区6次地震前,介质品质因子显示超出1倍均方差的高值变化特征,震后逐渐恢复到背景起伏状态;与大同窗传统的频次指标相比,介质品质因子的映震效果更好;阳原台的结果表明,仅近场区1次和外围区2次地震前,介质品质因子显示超出1倍均方差的高值变化特征,且有虚报、漏报。所处地质构造位置不同、传播路径介质差异可能是引起上述两个台站附近介质品质因子的地震对应效果明显不同的原因。     

基于滑动窗口导纳技术反演西太平洋中部岩石圈的有效弹性厚度

西太平洋中部地区是西太平洋板块边缘沟-弧-盆体系构造演化的关键区域,其地质特征与构造演化一直是地学家关注的焦点问题之一。开展岩石圈有效弹性厚度的研究对于认识该区域的形成演化具有重要的科学意义。本文采用滑动窗口导纳技术,并在挠曲模型中考虑了表面荷载和内部荷载同时存在的情况,计算得到该区域的岩石圈有效弹性厚度(Te)。计算结果显示,研究区的Te值整体上为0~50 km,其变化基本上与构造单元相吻合,且与主要的构造边界密切相关。除海底火山具有相对较小的Te值(15~20 km)外,太平洋板块整体上具有较强的岩石圈强度(25~30 km)。马里亚纳海沟和菲律宾海沟的岩石圈强度从外隆起到海沟方向表现为明显的减弱,表明岩石圈由外隆起向海沟发生了弱化。帕里西维拉海盆西部相较于东部具有较弱的岩石圈强度,这可能与海盆的非对称扩张有关。卡罗琳板块的岩石圈整体上表现为相对均一的低Te值特征(<15 km)。欧里皮克海隆、卡罗琳海岭和索罗尔海槽的Te值为3 km,这可能是强烈的火山作用所导致的结果。     

Moment Magnitude and Its Calculation

In this paper, we give a brief introduction to the proposal and development history of the earthquake magnitude concept. Moment magnitude M_W is the best physical quantity for measuring earthquakes. Compared with other magnitude scales used traditionally, moment magnitude is not saturated for all earthquakes, regardless of big and small earthquakes, deep and shallow earthquakes, far field and near field seismic data, geodetic and geological data, moment magnitude can be measured, and can be connected with well-known magnitude scales such as surface wave magnitude M_S. Moment magnitude is a uniform magnitude scale, which is suitable for statistics with wide magnitude range. Moment magnitude is the preferred magnitude selected by the International Seismological community, and it is preferred by the departments responsible for publishing seismic information to the public.Moment magnitude is a uniform magnitude scale, which is suitable for statistics with wide magnitude range. Moment magnitude is a preferred magnitude for international seismology, it is preferred by the agency responsible for providing information about earthquakes to the public. We provide all formulas used in the calculation of moment magnitude, and the calculation steps in detail. We also analyzed some problems and rules to solve these problems by using different formulas and numerical value calculation steps.     

江西地区地方性震级的量规函数与台基校正值研究

本文采用《江西测震台网地震观测报告》,选取2007年10月~2015年12月所记录的499次M_L≥1.5地震事件,对各子台测定震级与台网平均震级偏差进行定量的统计分析,从震级偏差频次分布、量规函数、台基、方位角等方面分析产生震级偏差的原因。在对量规函数和台基进行校正后,震级偏差绝对值在0.2以内的样本数达到了68.6%,并给出了适合江西地区的量规函数和台基校正值。     

强震动记录H/V谱比法计算处理的若干关键环节

强震动记录H/V谱比法自提出以来,已广泛应用于地震工程各研究领域中。但对数据处理的2个关键环节——Taper预处理及傅氏谱平滑未有详细研究。因此,本文针对强震动记录H/V谱比法计算涉及的重要数据处理过程,对四川地区19个强震动台站在汶川地震余震中获取的642组强震动记录开展研究。研究实例表明:S波H/V谱比振幅在周期 < 1s时高于全时程,论证计算H/V谱比时截取S波窗口的必要性;S波窗口的截断会引起傅里叶振幅谱的边瓣效应,若不加以处理,将显著影响低频部分H/V谱比结果,Taper预处理对于消除这种截断误差具有良好效果;在兼顾平滑效果及卓越周期识别准确度的基础上,通过不同带宽的Parzen窗试算,认为0.5Hz带宽宜用于傅里叶H/V谱比曲线平滑。     

Earthquake detection probability within a seismically quiet area: application to the Bruchsal geothermal field

In applications such as oil and gas production, deep geothermal energy production, underground storage, and mining, it is common practice to implement local seismic networks to monitor and to mitigate induced seismicity. For this purpose, it is crucial to determine the capability of the network to detect a seismic event of predefined magnitude in the target area. The determination of the magnitude of completeness of a network is particularly required to properly interpret seismic monitoring results. We propose a method to compute the detection probability for existing local seismic networks, which (i) strictly follows the applied detection sequence; (ii) estimates the detection capability where seismicity has not yet occurred; and (iii) delivers the results in terms of probabilities. The procedure includes a calibration of a local magnitude scale using regional earthquakes recorded by the network and located outside the monitored area. It involves pre‐processing of the seismograms recorded at each station as performed during the triggering sequence, which is assumed based on amplitude thresholds. Then, the calibrated magnitude–distance–amplitude relations are extrapolated at short distances and combined to reproduce the network detection sequence. This generates a probability to detect a seismic event of a given magnitude at a specified location. This observation‐based approach is an alternative to a fully theoretical detection capability modelling and includes field conditions. Seismic wave attenuation by geometrical spreading and intrinsic attenuation, site effect, and instrumental responses are partly accounted for by the calibration. We apply this procedure on the seismic network deployed in the Bruchsal geothermal field (Germany). Although the system was in good working order, no induced seismicity was identified in the area between June 2010, when monitoring started, and November 2012. The recording of distant seismicity during this time period, however, allowed the application of the proposed procedure. According to the applied network detection parameters, the results indicate that the absence of seismicity can be interpreted as a 95% probability that no seismic event with M_L ≥ 0.7 occurred below the network at 2.4‐km depth, i.e., in the geothermal reservoir.