The impact of rural land management changes on soil hydraulic properties and runoff processes: results from experimental plots in upland UK

To develop an evidence base to help predict the impacts of land management change on flood generation, four experimental sites were established on improved grassland used for sheep grazing at the Pontbren catchment in upland Wales, UK. At each site, three plots were established where surface runoff was measured, supplemented by measurements of soil infiltration rates and soil and vegetation physical properties. Following baseline monitoring, treatments were applied to two of the plots: exclusion of sheep (ungrazed) and exclusion of sheep and planting with native broadleaf tree species (tree planted), with the third plot acting as a control (grazed pasture). Due to a particularly dry summer that occurred pre‐treatment, the soil hydrological responses were initially impacted by the effects of the climate on soil structure. Nevertheless, treatments did have a clear influence on soil hydrological response. On average, post‐treatment runoff volumes were reduced by 48% and 78% in ungrazed and tree‐planted plots relative to the control, although all results varied greatly over the sites. Five years following treatment application, near‐surface soil bulk density was reduced and median soil infiltration rates were 67 times greater in plots planted with trees compared to grazed pasture. The results illustrate the potential use of upland land management for ameliorating local‐scale flood generation but emphasise the need for long‐term monitoring to more clearly separate the effects of land management from those of climatic variability. Copyright © 2013 John Wiley & Sons, Ltd.     

多层基础隔震房屋结构在水平地震力作用下的振动传递

文章将周期结构原理与导纳方法结合起来，分析了带复合结构单元的有阻尼的有限周期系统的波传播和振动特性，得到了有限周期结构自振频率的一般表达式。     

宁夏短期天气预报业务流程

介绍了以宁夏ＭＯＳ预报结果为基本指导产品、结合宁夏气象业务具体情况、通过二次开发建立在微机上的新型短期天气预报业务流程。该流程的建立,使宁夏短期天气预报人员基本摆脱了传统的纸上作业而转向新型的计算机预报平台,使宁夏短期天气预报的自动化水平上了一个新台阶。     

利用毛管压力曲线分形分维方法研究流动单元

利用取心井铸体薄片获得的图像资料和毛管压力曲线,通过图像分形几何学方法以分维数的形式定量地表征出了复杂的微观孔隙喉道结构特征,发现能够很好地划分和评价孔隙岩石中油、气、水的渗流差异,可以用于储层微观流动单元表征。文中阐述了岩石微观孔隙喉道结构分形的理论基础、计算方法和应用于表征流动单元的依据。建立了中国西部砾岩低渗透油藏微观孔隙喉道分维数与孔隙度、渗透率之间计算图版,据此在油藏中利用常规测井资料获得的孔隙度、渗透率参数计算微观孔隙喉道分维数,开展全油藏流动单元划分与评价,取得了良好的效果。研究结果表明,利用毛管压力曲线分形分维方法研究储层微观流动单元是一种很有效的途径。     

Comparing flow regime,channel hydraulics,and biological communities to infer flow–ecology relationships in the Mara River of Kenya and Tanzania

Abstract

Equatorial rivers of East Africa exhibit unusually complex seasonal and inter-annual flow regimes, and aquatic and adjacent terrestrial organisms have adapted to cope with this flow variability. This study examined the annual flow regime over the past 40 years for three gauging stations on the Mara River in Kenya and Tanzania, which is of international importance because it is the only perennial river traversing the Mara-Serengeti ecoregion. Select environmental flow components were quantified and converted to ecologically relevant hydraulic variables. Vegetation, macroinvertebrates, and fish were collected and identified at target study sites during low and high flows. The results were compared with available knowledge of the life histories and flow sensitivities of the riverine communities to infer flow–ecology relationships. Management implications are discussed, including the need to preserve a dynamic environmental flow regime to protect ecosystems in the region. The results for the Mara may serve as a useful model for river basins of the wider equatorial East Africa region.

Editor Z.W. Kundzewicz; Guest editor M. Acreman     

视频对象分割及跟踪方法研究

讨论和分析了视频对象全自动提取及后续帧中的跟踪过程及采用的方法,对其算法、分割性能和结果进行了比较和评述。并结合Hausdorff和Snake跟踪器,对初始对象轮廓进行跟踪。结果证明,这种跟踪方法能有效地解决对象被遮挡和形变以及背景移动的问题。     

Frictional heat generation and seismic radiation in a foam rubber model of earthquakes

Results from a study of stick-slip particle motion at the interface between two stressed foam rubber blocks indicate that normal vibrations and interface separation are an important part of the stick-slip process in foam rubber. The dimension of the dynamic slip pulse is small compared to the dimension of the model (approximately 10 cm vs. 200 cm) consistent with the abrupt-locking slip pulse model ofBrune (1970, 1976), andHeaton (1990). A comparison of frictional heat generation between stable-sliding and stick-slip foam rubber models indicates a linear relation between the temperature increase on the fault surface (for a given distance of slip) and the driving shear force for the stable-sliding model, while for the stick-slip model there is essentially no variation in frictional heat generation with an increase in shear stress. We performed experiments to investigate the ratio of normal motion to shear motion at different levels of normal stress in the stick-slip foam rubber model. Preliminary result indicate that the normal component of the particle motion increases more rapidly with increasing normal stress than the shear component. The phenomenon of interface separation and normal vibrations may thus explain some of the most frustrating problems in earthquake mechanics, e.g., the heat flow paradox, the long-term weakness of major active faults, and anomalousP-wave radiation.     

P–T–t–d evolution of orogenic middle crust of the Roc de Frausa Massif (Eastern Pyrenees): a result of horizontal crustal flow and Carboniferous doming?

Structural, petrological and textural studies are combined with phase equilibria modelling of metapelites from different structural levels of the Roc de Frausa Massif in the Eastern Pyrenees. The pre‐Variscan lithological succession is divided into the Upper, Intermediate and Lower series by two orthogneiss sheets and intruded by Variscan igneous rocks. Structural analysis reveals two phases of Variscan deformation. D1 is marked by tight to isoclinal small‐scale folds and an associated flat‐lying foliation (S1) that affects the whole crustal section. D2 structures are characterized by tight upright folds facing to the NW with steep NE–SW axial planes. D2 heterogeneously reworks the D1 fabrics, leading to an almost complete transposition into a sub‐vertical foliation (S2) in the high‐grade metamorphic domain. All structures are affected by late open to tight, steeply inclined south‐verging NW–SE folds (F3) compatible with steep greenschist facies dextral shear zones of probable Alpine age. In the micaschists of the Upper series, andalusite and sillimanite grew during the formation of the S1 foliation indicating heating from 580 to 640 °C associated with an increase in pressure. Subsequent static growth of cordierite points to post‐D1 decompression. In the Intermediate series, a sillimanite–biotite–muscovite‐bearing assemblage that is parallel to the S1 fabric is statically overgrown by cordierite and K‐feldspar. This sequence points to ~1 kbar of post‐D1 decompression at 630–650 °C. The Intermediate series is intruded by a gabbro–diorite stock that has an aureole marked by widespread migmatization. In the aureole, the migmatitic S1 foliation is defined by the assemblage biotite–sillimanite–K‐feldspar–garnet. The microstructural relationships and garnet zoning are compatible with the D1 pressure peak at ~7.5 kbar and ~750 °C. Late‐ to post‐S2 cordierite growth implies that F2 folds and the associated S2 axial planar leucosomes developed during nearly isothermal decompression to <5 kbar. The Lower series migmatites form a composite S1–S2 fabric; the garnet‐bearing assemblage suggests peak P–T conditions of >5 kbar at suprasolidus conditions. Almost complete consumption of garnet and late cordierite growth points to post‐D2 equilibration at <4 kbar and <750 °C. The early metamorphic history associated with the S1 fabric is interpreted as a result of horizontal middle crustal flow associated with progressive heating and possible burial. The upright F2 folding and S2 foliation are associated with a pressure decrease coeval with the intrusion of mafic magma at mid‐crustal levels. The D2 tectono‐metamorphic evolution may be explained by a crustal‐scale doming associated with emplacement of mafic magmas into the core of the dome.     

Solution for a plane strain rough‐walled hydraulic fracture driven by turbulent fluid through impermeable rock

The impact of turbulent flow on plane strain fluid‐driven crack propagation is an important but still poorly understood consideration in hydraulic fracture modeling. The changes that hydraulic fracturing has experienced over the past decade, especially in the area of fracturing fluids, have played a major role in the transition of the typical fluid regime from laminar to turbulent flow. Motivated by the increasing preponderance of high‐rate, water‐driven hydraulic fractures with high Reynolds number, we present a semianalytical solution for the propagation of a plane strain hydraulic fracture driven by a turbulent fluid in an impermeable formation. The formulation uses a power law relationship between the Darcy‐Weisbach friction factor and the scale of the fracture roughness, where one specific manifestation of this generalized friction factor is the classical Gauckler‐Manning‐Strickler approximation for turbulent flow in a rough‐walled channel. Conservation of mass, elasticity, and crack propagation are also solved simultaneously. We obtain a semianalytical solution using an orthogonal polynomial series. An approximate closed‐form solution is enabled by a choice of orthogonal polynomials embedding the near‐tip asymptotic behavior and thus giving very rapid convergence; a precise solution is obtained with 2 terms of the series. By comparison with numerical simulations, we show that the transition region between the laminar and turbulent regimes can be relatively small so that full solutions can often be well approximated by either a fully laminar or fully turbulent solution.     

采用复合单元法模拟裂隙多孔介质变饱和流动

采用复合单元法建立了模拟裂隙多孔介质变饱和流动的数值模型。该模型具有以下特点:裂隙不需要离散成特定单元,而是根据几何位置插入到孔隙基质单元中形成复合单元;在复合单元中,分别建立裂隙流和孔隙基质流的计算方程,二者通过裂隙-基质界面产生联系并整合成复合单元方程;复合单元方程具有和常规有限单元方程相同的格式,因此,可以使用常规有限单元方程的求解技术。采用欠松弛迭代、集中质量矩阵以及自适应时步调节等技术,开发了裂隙多孔介质变饱和流动计算程序。通过模拟一维干土入渗和复杂裂隙含水层内的流动问题,验证了该模型的合理性和适用性。模拟结果为进一步认识非饱和裂隙含水层地下水流动特性提供了理论依据。