弹性波CT技术及应用

弹性波ＣＴ技术是一种新的物探方法。本文简单地介绍了该技术的方法原理及影响图像重建的因素，并以实例说明了弹性波ＣＴ技术在煤矿井下的应用效果     

深基坑排桩—圈梁支护结构协同作用研究

排桩－圈梁的协同作用对深基坑支护结构的变形和内力有着重要的影响，为此对深基坑排极支护结构进行了弹性地基梁有限元分析，得出一些有意义的结论。     

三维溶质运移问题的分步广义迎风解法

对对流占优的三维溶质运移问题提出了分步广义迎风解法，首先利用Ｎ．Ｎ．Ｙａ－ｎｅｎｋｏ对水动力弥散方程分步求解的思想，将原来的一个定解问题分解为两个定解问题即对流定解问题和扩散定解问题，对对流定解问题采用广义迎风对偶单元均衡法求解，对扩散定解问题采用一般的Ｇａｌｅｒｋｉｎ有限元法求解，不仅避免了用一般有限元法和有限差分法求解对流占优的地下水水质数学模型时常出现数值弥散和过量问题，而且避免了求节点速度这一步，节省运算步骤，对井点的浓度变化给出了更合适的求解方法。     

A model for grain-size sorting over tidal sand ridges

A model was developed and analyzed to quantify the effect of graded sediment on the formation of tidal sand ridges. Field data reveal coarse (fine) sediment at the crests (in the troughs), but often phase shifts between the mean grain-size distribution and the bottom topography occur. Following earlier work, this study is based on a linear stability analysis of a basic state with respect to small bottom perturbations. The basic state describes an alongshore tidal current on a coastal shelf. Sediment is transported as bed load and dynamic hiding effects are accounted for. A one-layer model for the bed evolution is used and two grain size classes (fine and coarse sand) are considered. Results indicate an increase in growth and migration rates of tidal sand ridges for a bimodal mixture, whilst the wavelength of the ridges remains unchanged. A symmetrical externally forced tidal current results in a grain-size distribution which is in phase with the ridges. Incorporation of an additional external M₄ tidal constituent or a steady current results in a phase shift between the grain-size distribution and ridge topography. These results show a general agreement with observations. The physical mechanism responsible for the observed grain-size distribution over the ridges is also discussed.Responsible Editor: Jens Kappenberg     

O(T2)精度下椭球界面Dirichlet边值问题的积分解

研究了边界是参考椭球面的Laplace方程Dirichlet边值问题的求解，在O(ε4·T)精 度下给出了参考椭球界面上扰动重力位Dirichlet外问题的积分解式. 该结果理论上优于目 前常用的球近似下的积分解式，从而为研究物理大地测量中边值问题的求解提供了新的依据     

A coherency function model of ground motion at base rock corresponding to strike-slip fault

IntroductionEarthquakedamagesurveyandresearchresultshavedemonstratedthatspatialdistributiondifferenceofgroundmotionisoneoftheimportantreasonswhichcausedlongstructure(eglongspanbridge,undergroundpipe)destroy.Thathowtoprovideareasonableinputofgroundmotionfieldforaseismicdesignoflongstructureisaurgentprobleminearthquakeengineeringfield.Atpresent,themethodtostudyspatialvariationofgroundmotionsisadoptingstatisticanalysisbasedondensearrayrecordssuchasSMART-1array,etc,togetcoherencyfunctionofground…     

3-D rheologic model of earthquake preparation (II): Strain field and its applications

Introduction Based on the elastic theory of the hard inclusion (Dobrovolskii, 1991), we developed an inclusion theory of rheologic medium, and applied the results of bulk-strain field of a rheologic inclusion model to explain the spatial-temporal evolution process of earthquake precursors (SONG, et al, 2000). In the former paper (SONG, et al, 2003), we derived the viscoelastic displacement field of the rheologic inclusion model on the basis of the analytic expression of displacement field o…     

The effect of an interface boundary layer on the resonance properties of a buried structure

This paper presents a model for the analysis of the diffraction of plane waves at a cavity in an infinite homogeneous linear elastic medium supported by a segmented lining. An elastic boundary layer is introduced between the cavity lining and the infinite medium. The boundary layer is simulated by ‘elastic boundary conditions’ in which the stress is proportional to the relative displacement of the lining and of the surrounding medium boundary. A closed‐form analytical solution of the problem was obtained using the Fourier–Bessel series, the convergence of which was proven. It was shown that the number of series terms required to obtain a desired level of accuracy can be determined in advance. Using amplitude–frequency response analysis it was shown that the boundary layer produces additional ‘pseudo‐resonance’ frequencies that depend on the layer properties. These frequencies are almost identical to the eigenvalues obtained from the simple analysis of a segmented elastically supported lining. Copyright © 2003 John Wiley & Sons, Ltd.     

增量位移反分析在水电地下洞室工程中的应用

反分析是确定计算模型参数的有效方法.通常多采用量测所得全量位移进行反演计算.但地下工程中许多量测数据为增量位移,且实际施工过程可以通过建立分步开挖的有限元模型来模拟.据此,结合某水电站地下洞室工程中地下厂房的开挖,建立了模拟动态施工的有限元模型,利用某一开挖步施工前后量测值之差,采用增量位移优化反分析方法对洞室附近初始地应力场及围岩弹性模量进行了反演.计算所得增量位移与实测值符合较好,表明了这种方法的可行性.同时,根据分析结果对该方法进行了评价.     

花岗岩研究进展 ———ISMA花岗岩类分类综述

本文在论述花岗岩主要分类的基础上论述了ISMA花岗岩类的基本含义,讨论了人们在以后应用和推广ISMA这类花岗岩分类方案时存在的一些问题,指出了ISMA花岗岩类本身在分类过程中存在的一些基本问题。