三维脆性破裂的拉应力判据

用线弹性断裂力学对连续介质中三维裂纹(KⅢ≠0)破裂的拉应力断裂准则提出了补充性假说和相应的计算方法（第一主微分面定点法）。对于给定应力强度因子Ki（i=Ⅰ,Ⅱ,Ⅲ）的裂纹问题,从理论上给出了初始破裂面完整形式的解析表示或数值计算结果。推导结果是,三维拉张破裂的初始破裂面是以破裂点为顶点的广角锥面,跨在原始裂纹面的前缘,它的外缘为螺旋线,锥面的每一条母线都与过该线的第一主微分面重合。大量的这样的初始破裂面叠错密接,互不相交。推算的结果与已有的三锥破裂实验结果基本符合。把补充后的拉应力判据和最大拉应力理论相比较,发现在应力分量只保留奇异项的情况下,这两种判据是等价的;但如果对应力分量作零阶项修正,则两种判据只在三维(KⅢ≠0)问题中等价,在二维(KⅢ=0)问题中不完全等价。     

A pair of Langmuir cells in two laboratory tanks (II) on generation mechanism

Vertical and cross-wind profiles of mean currents were measured systematically in vertical cross-sections of two wind-wave tanks with aspect ratios of order one to study the secondary flow in the tanks. A pair of Langmuir cells turned out to be driven by a close combination of the pressure gradient along the tank and the side-wall effects. That is, part of the adverse pressure gradient produced a parabolic cross-wind profile with the smallest downwind current at the centerline and the largest current along the two sidewalls. As a result, upwelling occurred in the center zone where the return flow was strongest, probably because of the entrainment action of the wind-driven current. In order to compensate for this upwelling, downwelling occurred along the two side-walls from the flow continuity. The resulting vertical circulation formed a pair of Langmuir circulations across the span and served to maintain the parabolic profile formed by the pressure gradient. A positive feedback mechanism is thus found between the primary and secondary circulations through upwelling of the return flow in the center zone. Vertical shears of the span-averaged downwind current measured in two tanks were found to be systematically different from each other. This difference seems to depend on the magnitude of the advective Reynolds stresses in the two tanks.     

两种显著性检验方法在海洋大数据序列主成分分析中的应用

介绍海洋大数据序列主成分分析的两种显著性检验方法,采用该两种方法可以辨别具有真实意义的主成分模与代表随机噪声信号的模态。此二法均能很好地应用于大数据序列主成分模的显著性检验。在进行海洋大数据序列时-空变化主成分分析中,为尽可能减少或避免数据中随机噪声的影响,建议对主成分模进行显著性检验。     

基于几何形态测量学的四种滨螺形态差异与系统发生关系研究

运用几何形态测量学方法研究浙江省大陈岛海域常见的4种滨螺间的形态关系。对4种滨螺的壳口、螺体分别进行数字化标点,经叠印分析、主成分分析(PCA)和薄片样条法分析,获得4种滨螺在壳口和螺体上的差异,并进一步分析其形态特征与潮间带环境适应性关系。PCA结果表明四种滨螺壳口间差异在主成分轴上无法有效分开,而螺体间差异在主成分轴上能有效分开,说明壳口特征在不同滨螺间不具有规律性差异。螺体的PCA中PC1轴可以将短滨螺与其他3种滨螺区分,薄片样条法分析显示差异的部位主要在体螺层的宽度和螺体的高度间,PC2轴可以将粒结节滨螺与其他3种滨螺分开,薄片样条法分析显示差异部位主要是体螺层之上第一层以及体螺层之间。基于螺体特征的4种滨螺亲缘关系分析表明粗糙滨螺与塔结节滨螺亲缘关系最近,其次为短滨螺,粒结节滨螺最不相近。运用特征追踪法对螺层和螺肋特征追踪,结果表明螺层6层,螺肋密生是滨螺的祖先特征,后来演化出7层和8层的螺层特征以及颗粒状突起的螺肋特征。     

我国几种常见润滑油的指纹分析

采用气相色谱／质谱方法（GC／MS）对7种常见润滑油中的生物标志化合物（正构烷烃、姥鲛烷、植烷、甾烷、萜烷、多环芳烃）进行定性分析,并基于其生物标志化舍物指纹信息进行了多元统计分析。结果表明,润滑油的气相色谱图中不可分辨的混合物（UCM）具有明显优势;润滑油中含有丰富的甾、萜烷类稠环生物标志化合物,仅含有非常少量的饱和...     

Effects of wave–current interaction on the current profile

Wave–current laboratory experiments have shown that the logarithmic current profile observed in pure current flows is modified due to the presence of waves. When waves propagate opposite the current, an increase in the current intensity is achieved near the mean water level, while a reduction is obtained for following waves and currents. With the aim of analyzing these nonlinear effects along the whole water column, an Eulerian wave–current model is presented. In contrast to previously presented wave–current models, the present is able to include the variation of the free surface elevation due to the wave motion and the effect of a non hydrostatic pressure field. Therefore it does not restrict its application to waves in shallow waters. Moreover, the model is able to simulate all the possible angles between waves and currents.     

基于PCA法的春、夏季东山湾海域富营养化特征

根据2011年5月和8月东山湾及邻近海域的调查结果,选择10个与富营养化有关的参数,包括溶解无机氮(DIN)、溶解硅酸盐(DSi)、活性磷酸盐(SRP)、总氮(TN)、总磷(TP)、化学耗氧量(COD)、溶解有机碳(DOC)、总有机碳(TOC)、叶绿素a(Chl-a)和浮游植物丰富度(d)等,应用主成分分析(PCA)法对该海域富营养化特征进行研究。主成分分析表明,主成分1(PC1)表征了有机污染、浮游植物和总磷状况;主成分2(PC2)反映了硅和氮营养水平,主成分3(PC3)体现了SRP的特点。春、夏季PC1、PC2、PC3和综合主成分(CPC)的空间分布表明漳江口和八尺门养殖区邻近海域富营养化风险较高;各主成分与盐度的相关分析表明东山湾内富营养化压力主要来自漳江,夏季有所增强;有机污染物和浮游植物可能是控制东山湾海域春、夏季富营养空间分布的主要驱动因素。     

双向耦合循环剪切条件下超固结饱和海洋黏土孔压与强度特性研究

针对长江口地区的重塑饱和海洋黏土,进行了一系列均等固结条件下的应力控制式轴向-扭转双向耦合循环剪切试验,着重探讨了循环荷载分量比R与超固结比OCR对孔压与动强度特性的影响。试验结果表明,随着R的减小,波动孔压幅值逐渐降低,而残余孔压先降低后升高,R = 1时残余孔压最小。在循环耦合剪切作用过程中,对应相同循环次数,随着OCR的增大,累积孔压变小,而波动孔压幅值却在增大。对应相同循环次数比N/Nf,随着OCR增大,残余孔隙水压力比ur / urmax减小。经归一化处理后ur / urmax-N/Nf关系曲线对于正常固结与超固结饱和黏土可分别用不同的表达式来表达。随着R的降低,破坏循环次数先增大后减小,R = 1时最大。随着OCR的增大,饱和黏土的强度变化减小     

États de contraintes et mécanismes d'ouverture et de fermeture des bassins permiens du Maroc hercynien. L'exemple des bassins des Jebilet et des RéhamnaStates of stresses and opening/closing mechanisms of the Permian basins in Hercynian Morocco. The example of the Jebilet and Réhamna Basins

The fracturing analysis in the Permian basins of Jebilet and Rehamna (Hercynian Morocco) and the underlying terranes allowed us to suggest a model for their opening. Three tectonic episodes are distinguished: a transtensional episode NNE–SSW-trending (Permian I), occurring during the opening along sinistral wrench faults N70–110-trending, associated with synsedimentary normal faults; a transpressive episode ESE–WNW-trending (Permian II), initiating the closure, the normal faults playing back reverse faults and the N70 trending faults dextral wrench faults; a compressional episode NNW–SSE (post-Permian, ante-Triassic), accentuating the closure and the deformation and putting an end to the Tardi-Hercynian compressive movements. To cite this article: A. Saidi et al., C. R. Geoscience 334 (2002) 221–226.