海原断裂干盐池拉分盆地中央断层的形成机制探讨

拉分盆地内部的"对角线式中央断层",不仅在拉分盆地的消亡过程中发挥着重要作用,还对大地震的发生具有重要控制作用,研究其形成演化具有重要的意义.然而,与拉分盆地相比,专门针对中央断层的研究较少,制约了人们对拉分盆地乃至走滑断裂带构造演化过程的理解.文中以海原断裂带中段的干盐池拉分盆地为例,对盆地内的中央断层开展了地质地貌...     

商丹断裂带(河南段)构造变形特征及其找矿意义

商丹断裂带是一条多期次活动的大型断裂带,区域上也是大型金属矿的赋存带,对金属矿产具有重要的控制作用.文章以商丹断裂带(河南段)为研究对象,在基于孔沟至寨根一带构造剖面的宏观特征和显微构造特征解析的基础上,对研究区控矿构造和机理提出了新的认识.综合研究表明,商丹断裂带(河南段)具多期活动特征,整体呈现"正花状构造"样式....     

The chronostratigraphy of a quaternary sequence at the distal part of the nile littoral cell,Haifa Bay,Israel

The current detailed chronostratigraphic framework of the last 1 Ma of an eastern Mediterranean sequence (Haifa Bay, Israel) aims to examine the relative roles of sea‐level changes, climate and tectonics. Seven continuous marine cores, up to ～120 m long, were recovered from shallow water depths. The cores were dated by optically stimulated luminescence, ¹⁴C, magnetostratigraphy, ²³⁰Th/²³⁴U, ²⁶Al/¹⁰Be, occurrence of index fossils and correlated to the global sea‐level curve and Marine Isotope Stages (MIS). The sedimentary sequence accumulated during the last ca. 1.0 Ma consists of 21 transgression–regression units with hiatuses between them. Five marine/terrestrial cycles, which occur in the lower part of the sequence, are attributed to the Jaramillo subchron and the Brunhes–Matuyama boundary, and correspond to MIS 29–21. The top ～50 m includes three sedimentary cycles deposited in the last ca. 400 ka. The regressive phases during this interval correspond to Glacial MIS 8, 6 and 2, while the transgressions correspond to Interglacial MIS 11, 7, 5 and 1. Thus, for the first time, this study documents the longest Quaternary succession dated so far in a key area of the Levant, sensitive to global history of sea‐level changes and glacial/interglacial fluctuations. Copyright © 2012 John Wiley & Sons, Ltd.     

The strain‐dependent spatial evolution of garnet in a high‐P ductile shear zone from the Western Gneiss Region (Norway): a synchrotron X‐ray microtomography study

Reaction and deformation microfabrics provide key information to understand the thermodynamic and kinetic controls of tectono‐metamorphic processes, however, they are usually analysed in two dimensions, omitting important information regarding the third spatial dimension. We applied synchrotron‐based X‐ray microtomography to document the evolution of a pristine olivine gabbro into a deformed omphacite–garnet eclogite in four dimensions, where the 4^th dimension is represented by the degree of strain. In the investigated samples, which cover a strain gradient into a shear zone from the Western Gneiss Region (Norway), we focused on the spatial transformation of garnet coronas into elongated garnet clusters with increasing strain. The microtomographic data allowed quantification of garnet volume, shape and spatial arrangement evolution with increasing strain. The microtomographic observations were combined with light microscope and backscatter electron images as well as electron microprobe (EMPA) and electron backscatter diffraction (EBSD) analysis to correlate mineral composition and orientation data with the X‐ray absorption signal of the same mineral grains. With increasing deformation, the garnet volume almost triples. In the low‐strain domain, garnet grains form a well interconnected large garnet aggregate that develops throughout the entire sample. We also observed that garnet coronas in the gabbros never completely encapsulate olivine grains. In the most highly deformed eclogites, the oblate shapes of garnet clusters reflect a deformational origin of the microfabrics. We interpret the aligned garnet aggregates to direct synkinematic fluid flow, and consequently influence the transport of dissolved chemical components. EBSD analyses reveal that garnet shows a near‐random crystal preferred orientation that testifies no evidence for crystal plasticity. There is, however evidence for minor fracturing, neo‐nucleation and overgrowth. Microprobe chemical analysis revealed that garnet compositions progressively equilibrate to eclogite facies, becoming more almandine‐rich. We interpret these observations as pointing to a mechanical disintegration of the garnet coronas during strain localization, and their rearrangement into individual garnet clusters through a combination of garnet coalescence and overgrowth while the rock was deforming.     

A geochronological and petrological study of anatectic paragneiss and associated granite dykes from the Day Nui Con Voi metamorphic core complex,North Vietnam: constraints on the timing of metamorphism within the Red River shear zone

The Red River shear zone (RRSZ) is a major left‐lateral strike‐slip shear zone, containing a ductilely deformed metamorphic core bounded by brittle strike‐slip and normal faults, which stretches for >1000 km from Tibet through Yunnan and North Vietnam to the South China Sea. The RRSZ exposes four high‐grade metamorphic core complexes along its length. Various lithologies from the southernmost core complex, the Day Nui Con Voi (DNCV), North Vietnam, provide new constraints on the tectonic and metamorphic evolution of this region prior to and following the initial India–Asia collision. Analysis of a weakly deformed anatectic paragneiss using P–T pseudosections constructed in the MnO–Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–O (MnNCKFMASHTO) system provides prograde, peak and retrograde metamorphic conditions, and in situ U–Th–Pb geochronology of metamorphic monazite yields texturally controlled age constraints. Tertiary metamorphism and deformation, overprinting earlier Triassic metamorphism associated with the Indosinian orogeny and possible Cretaceous metamorphism, are characterized by peak metamorphic conditions of ~805 °C and ~8.5 kbar between c. 38 and 34 Ma. Exhumation occurred along a steep retrograde P–T path with final melt crystallizing at the solidus at ≥~5.5 kbar at ~790 °C. Further exhumation at ~640–700 °C and ~4–5 kbar at c. 31 Ma occurred at subsolidus conditions. U–Pb geochronological analysis of monazite from a strongly deformed pre‐kinematic granite dyke from the flank of the DNCV provides further evidence for exhumation at this time. Magmatic grains suggest initial emplacement at 66.0 ± 1.0 Ma prior to the India–Asia collision, whereas grains with metamorphic characteristics indicate later growth at 30.6 ± 0.4 Ma. Monazite grains from a cross‐cutting post‐kinematic dyke within the core of the DNCV antiform provide a minimum age constraint of 25.2 ± 1.4 Ma for the termination of fabric development. A separate and significant episode of monazite growth at c. 83–69 Ma is suggested to be the result of fluid‐assisted recrystallization following the emplacement of magmatic units.     

Multistage deformation of linked fault systems in extensional regions: An example from the northern Perth Basin,Western Australia

Linked fault systems identified in the northern portion of the onshore Perth basin comprise north‐striking normal faults, the dominant structures in the basin, and hard linkages—east‐striking transfer faults. The former are either divided into segments of distinctive character by, or terminate at, the transfer faults. The fault systems were initiated by west‐southwest‐east‐northeast extension in the Early Permian but were reactivated by subsequent rifting with approximately east‐west extension in the Jurassic. They were also reactivated by the oblique extension of northwest‐southeast orientation associated with Gondwana continental breakup in the Late Jurassic ‐ earliest Cretaceous. In addition to reactivation, older structures of the linked fault families controlled the development of younger fractures and folds. During the oblique extension, the linked fault systems define releasing bends, characterised by a rollover anticline in the hangingwall of the Mountain Bridge Fault, and restraining bends where contractional folds are sites of major commercial hydrocarbon fields in the basin.     

Garnet crystal plasticity in the continental crust,new example from south Madagascar

Garnet (10 vol.%; pyrope contents 34–44 mol.%) hosted in quartzofeldspathic rocks within a large vertical shear zone of south Madagascar shows a strong grain‐size reduction (from a few cm to ～300 μm). Electron back‐scattered diffraction, transmission electron microscopy and scanning electron microscope imaging coupled with quantitative analysis of digitized images (PolyLX software) have been used in order to understand the deformation mechanisms associated with this grain‐size evolution. The garnet grain‐size reduction trend has been summarized in a typological evolution (from Type I to Type IV). Type I, the original porphyroblasts, form cm‐sized elongated grains that crystallized upon multiple nucleation and coalescence following biotite breakdown: biotite + sillimanite + quartz = garnet + alkali feldspar + rutile + melt. These large garnet grains contain quartz ribbons and sillimanite inclusions. Type I garnet is sheared along preferential planes (sillimanite layers, quartz ribbons and/or suitably oriented garnet crystallographic planes) producing highly elongated Type II garnet grains marked by a single crystallographic orientation. Further deformation leads to the development of a crystallographic misorientation, subgrains and new grains resulting in Type III garnet. Associated grain‐size reduction occurs via subgrain rotation recrystallization accompanied by fast diffusion‐assisted dislocation glide. This plastic deformation of garnet is associated with efficient recovery as shown by the very low dislocation densities (10¹⁰ m^?3 or lower). The rounded Type III garnet experiences rigid body rotation in fine‐grained matrix. In the highly deformed samples, the deformation mechanisms in garnet are grain‐size‐ and shape‐dependent: dislocation creep is dominant for the few large grains left (>1 mm; Type II garnet), rigid body rotation is typical for the smaller rounded grains (300 μm or less; Type III garnet) whereas diffusion creep may affect more elliptic garnet (Type IV garnet). The P–T conditions of garnet plasticity in the continental crust (≥950 °C; 11 kbar) have been identified using two‐feldspar thermometry and GASP conventional barometry. The garnet microstructural and deformation mechanisms evolution, coupled with grain‐size decrease in a fine‐grained steady‐state microstructure of quartz, alkali feldspar and plagioclase, suggests a separate mechanical evolution of garnet with respect to felsic minerals within the shear zone.     

Rate and historical change of direct recharge from precipitation constrained by unsaturated zone profiles of chloride and oxygen‐18 in dry river bed of North China Plain

Quantifying of direct recharge derived from precipitation is crucial for assessing sustainability of well‐irrigated agriculture. In the North China Plain, the land use is dominated by groundwater‐irrigated farmland where the direct recharge derived from precipitation and irrigation. To characterize the mean rate and historical variance of direct recharge derived from precipitation, unsaturated zone profiles of chloride and δ¹⁸O in the dry river bed of the Beiyishui River were employed. The results show that archival time scale of the profile covers the duration from 1980 to 2002 (corresponding to depths from 5 to 2 m) which is indicated by matching the δ¹⁸O peaks in the isotope profile with the aridity indexes gained by instrumental records of annual precipitation and annual potential evaporation. Using the chloride mass balance method, the mean rate of the direct recharge corresponding to the archival time scale is estimated to be 3·8 ± 0·8 mm year^?1, which accounts for about 0·7% of the long‐term average annual precipitation. Further, the direct recharge rates vary from 2·1 to 6·8 mm year^?1 since 1980. Despite the subhumid climate, the estimate of recharge rates is in line with other findings in semiarid regions. The low rate of direct recharge is considered as a result of the relative dry climate in recent decades. In dry river bed, unsaturated zone profiles of chloride and δ¹⁸O combined with instrumental records could offer valuable information about the direct recharge derived from precipitation during droughts. Copyright © 2011 John Wiley & Sons, Ltd.     

The role of eddies in solute transport and recovery in rock fractures: Implication for groundwater remediation

A better understanding of solute transport and retention mechanism in rock fractures has been challenging due to difficulty in their direct observations in microscale rough‐walled fractures. Six representative troughs in a rough‐walled fracture were selected for microscale observations of eddy formation with increasing flow velocity and its effect on spatiotemporal changes of solute concentration. This experimental study was enabled by a microscale visualization technique of micro particle image velocimetry. With increasing flow velocity (Re ≤ 2.86), no eddies were generated, and solutes along the main streamlines transported rapidly, whereas those near the wall moved slowly. A larger amount of solutes remained trapped at all troughs at Re = 2.86 than Re < 1. For Re = 8.57, weak eddies started to be developed at the troughs on the lee side, which little contributed to overall solute flushing in the fracture. Accordingly, a large of amount of water was needed for solute flushing. The flow condition of 1 < Re < 10, before a full development of eddies, was least favourable in terms of time and amount of remediation fluid required to reach a target concentration. After large eddies were fully developed at troughs on the lee side for Re = 17.13, solutes were substantially reduced by eddies with less amount of water. Fully developed eddies were found to enhance solute transport and recovery, as opposed to a general consensus that eddies trap and delay solutes. Direct inflow into troughs on the stoss side also made a great contribution to solute flushing out of the troughs. This study indicates that fully developed eddies or strong inflows at troughs are highly possible to form for Re > 10 and this flow range could be favourable for efficient remediation.     

Late-Hercynian shearing during crystallization of granitoid magmas (Sila massif,southern Italy): regional implications

Shearing of regional extent, involving granitoids and underlying mid-crustal rocks of the Sila massif (Calabria, Italy), is analysed in this paper. The deformed granitoids are affected by a wide NNW-SSE oriented deformation zone, stretching for about 60 km, from the neighbourhood of Cecita Lake to Cropani village. Meso- and micro-structures in granitoids, close to the boundary with underlying migmatitic paragneiss, indicate that deformation developed from melt-present to solid-state conditions. Simultaneous tectonics and magmatism activated a plutonic accretionary process at mid-crustal levels. This took place at about 300 Ma and involved hybrid magmas with a dominat contribution from a mantle source. The deformation regime remained steady for a long time during magma crystallization and cooling in subsolidus conditions. The regional top-to-the-W sense of shear in the present geographic coordinates, recorded in the deformed granitoids, seems geometrically consistent with the coeval direction of maximum extension found in another sector of the southern Hercynian belt, suggesting the original position of the Sila basement in this context. Magmatic ativity ended with the intrusion of mafic and felsic magams affected by a very weak deformation, ongoing during the final strain increments of the late-Hercynian stage.