处置库污泥工程特性测试研究

对某填埋场污泥库中取样的污泥进行了岩土工程特性测试,包括有机质含量、含水率、界限含水率、颗粒级配、渗透系数、压缩固结特性及抗剪强度等。试验结果表明,与常规淤泥相比,污泥库中经一段时间降解后污泥有机质含量及含水率较高,平均值分别为45%和520%;污泥在历时2 a的生物降解作用下,污泥含水率、有机质含量沿深度呈较为明显的减少趋势;污泥具有极高的压缩性,压缩系数a100-200高达7 MPa-1;污泥的固结表现为非线性大变形特性,其固结系数在10-5～10-6 cm2/s,比淤泥低1～2个数量级,固结系数随压力的增加而显著减少;污泥的抗剪强度参数较小,其黏聚力为0,内摩擦角为14.7°。有机质含量高是污泥高含水率、高液塑性指数、高压缩性,低渗透性、低固结系数及低抗剪强度的本质原因。以上成果可为污泥库的固化处置、稳定分析等提供必要的参数。     

Physical analog (centrifuge) model investigation of contrasting structural styles in the Salt Range and Potwar Plateau,northern Pakistan

We use scaled physical analog (centrifuge) modeling to investigate along- and across-strike structural variations in the Salt Range and Potwar Plateau of the Himalayan foreland fold-thrust belt of Pakistan. The models, composed of interlayered plasticine and silicone putty laminae, comprise four mechanical units representing the Neoproterozoic Salt Range Formation (basal detachment), Cambrian–Eocene carapace sequence, and Rawalpindi and Siwalik Groups (Neogene molasse), on a rigid base representing the Indian craton. Pre-cut ramps simulate basement faults with various structural geometries.A pre-existing north-dipping basement normal fault under the model foreland induces a frontal ramp and a prominent fault-bend-fold culmination, simulating the Salt Range. The ramp localizes displacement on a frontal thrust that occurs out-of-sequence with respect to other foreland folds and thrusts. With a frontal basement fault terminating to the east against a right-stepping, east-dipping lateral ramp, deformation propagates further south in the east; strata to the east of the lateral ramp are telescoped in ENE-trending detachment folds, fault-propagation folds and pop-up structures above a thick basal detachment (Salt Range Formation), in contrast to translated but less-deformed strata with E–W-trending Salt-Range structures to the west. The models are consistent with Salt Range–Potwar Plateau structural style contrasts being due to basement fault geometry and variation in detachment thickness.     

Comments on ‘A comparative study of ANN and neuro-fuzzy for the prediction of dynamic constant of rockmass’

Singh et al (2005) examined the potential of the ANN and neuro-fuzzy systems application for the prediction of dynamic constant of rockmass. However, the model proposed by them has some drawbacks according to fuzzy logic principles. This discussion will focus on the main fuzzy logic principles which authors and potential readers should take into consideration.     

江淮切变线强度的定量化描述方法研究

从气象观测事实和物理的角度出发,定义了一种江淮切变线强度的定量化的表征方法,即综合与降水关系密切的切变涡度和散度形成能客观近似地刻画切变线附近切变强度的指标量■。并在此基础上利用再分析资料和实况降水资料分析切变强度与对应降水量之间的关系,分析表明:强切变强度区域与降水雨带有明显的对应关系,降水区往往与强切变强度区域相一致或是比强切变强度区域略偏南;证实了切变强度与降水强度有正相关关系的事实,当切变强度■时,对应区域6 h累积降水量超过10 mm,甚至达到30 mm。     

土石混合料剪切面分形特征试验研究

土石混合料因具有良好的工程特性而被广泛应用于道路、堤坝等工程，填筑体受力后往往沿薄弱面发生剪切破￡混合料的抗剪强度成为稳定和变形分析的重要力学指标。由于土石混合料物质组成的复杂性、结构分布的不规律性及采柠困难性，且受检测仪器的限制，确定其强度指标较为困难。应用改进的直剪试验仪进行了不同类别、不同最大粒径土石福料的室内大型直剪试验，在获得强度指标同时，再现剪切面的实际情况，量测剪切面的起伏特征。根据分形几何学原理，切面具有良好的分形特征，应用三角形棱柱表面积覆盖法编程计算了剪切面的分形维数。初步建立了剪切面分形维数与福料杭萌强度之间的关系，用来快速预测土石混合料的强度指标。     

冻结盐渍砂土单轴强度特性研究

通过对兰州盐渍砂土重塑土添加不同量的盐分来模拟不同含盐量的盐渍土, 并对其进行单轴抗压试验, 分析其在不同含盐量、不同温度及不同速率的应变加载情况下, 冻结盐渍砂土的单轴抗压强度的变化规律, 重点讨论了盐分对土体力学参数的影响以及弹性模量与含盐量、温度的关系. 结果表明: 易溶盐含量的增加会导致单轴抗压强度逐渐降低, 试验温度越低抗压强度会越大; 应变加载速率的增加会增大土体的单轴抗压强度, 同时会缩短土体达到应力峰值的时间; 土体含盐量越大弹性模量越小, 温度越低弹性模量越大.     

重塑硅藻土抗剪强度的环剪试验研究

硅藻土是一种强结构性土,具有密度小、孔隙大、干燥土块吸水率高等特点。天然硅藻土的抗剪强度大,但在外界扰动或风化后,结构性强度丧失,易发生滑坡等斜坡变形破坏现象,因此,研究其在大变形下的力学性质很有必要。利用环剪仪可以研究土体在较大剪切位移条件下抗剪强度变化规律,对重塑硅藻土进行环剪试验研究,得到了不同竖向压力下的应力-位移曲线,认为重塑硅藻土为典型的应变软化型土;根据测试结果得到了重塑硅藻土的抗剪强度和残余强度,并从物质组成和微观结构特征方面对重塑硅藻土的力学性质进行了分析,为硅藻土滑坡的成因分析和灾害防治提供了依据。     

2022年1月8日青海门源6.9级地震短临异常跟踪分析

2022年1月8日青海门源县发生6.9级地震,此次地震前青海地区出现了大量地球物理观测异常。2021年10月下旬青海地区出现地磁垂直强度极化高值异常,10月27日异常台站最多,并在门源-祁连至兴海地区形成一个面积约为6.6×10⁴km²的高值异常区;此外,2021年7—11月青海地区8项地下流体观测数据出现准同步异常变化。结合青海及周边地区历史震例的分析结果,认为2021年11月23日至2022年1月23日,青海西北部地磁垂直强度极化高值区内可能发生5.6～6.4级地震。门源6.9级地震发生在地磁垂直强度极化异常出现后的73天,震中位于预测区的边缘,地震的发生时间和地点与预测意见一致,但震级超出预测意见上限值0.5级。此次地震前基于地球物理观测地震预测指标体系开展的短临异常跟踪分析过程,对中国大陆西部地震预报工作具有一定的参考意义。     

低速冲击下高强钢绞线网-高性能砂浆加固钢筋混凝土梁试验研究

研究了高强钢绞线网-高性能砂浆加固钢筋混凝土梁的抗低速冲击性能,利用落锤冲击试验法对4根简支钢筋混凝土梁进行对比试验研究,其中1根为普通梁,3根为加固梁,通过分析加固前后梁的破坏形态,结合挠度变化、钢筋的应变以及加速度的时程曲线,对比得到了钢筋混凝土梁加固后的抗冲击性能。研究结果表明：加固后钢筋混凝土梁的抗冲击能力显著提高,钢绞线和砂浆作为外加层,不仅增加了梁的抗弯剪能力和刚度,提高了结构的耗能能力,而且限制了裂缝的发展,使梁的整体性和延性更好;在相同冲击作用下,钢绞线直径的增加能适当提高结构的抗冲击性能。     

Mechanical properties of calcareous silts in a hydraulic fill island-reef

Abstract

The mechanical characteristics of calcareous silt interlayers play an important role in the stability of island-reef foundations. Direct shear and consolidation tests were performed to study the relationship between the mechanical properties and the physical parameters of calcareous silt. Based on the consolidation test results and analysis of the settling examples, different calculation methods for soil settling were compared. The results show the following. (1) The relationship between the cohesion and water content of calcareous silt can be represented by an M-shaped curve. The water contents corresponding to the two peaks of the M-type curve increase with increasing dry density. (2) When the dry density is less than 1.33?g/cm³, increasing the density significantly improves the internal friction angle of calcareous silts. When the dry density of the calcareous silt is greater than 1.33?g/cm³, the internal friction angle is affected by both the dry density and the water content. (3) The shear strength decreases when the water content exceeds the optimum level. (4) The compressive modulus of calcareous silt is larger than that of terrigenous silt. Specifically, it decreases with decreasing dry density and increasing water content. (5) The stepwise loading method should be used to estimate the soil settling before fill engineering construction.