埋深基础地基极限承载力的数值求解方法

为确定作用在已知埋深、给定基础形状地基土上的极限承载力,对基底下的土体进行网格划分,先假定一均布荷载作用在此地基土上,运用明德林解的积分公式,结合角点法,编制MATLAB语言程序,求出每个网格节点上附加应力,进而求得每个网格节点上主应力,根据破坏准则,结合程序找出破坏点的坐标,利用MATLAB的图形处理功能,把破坏点的坐标在坐标图中显示出来。继续加大矩形荷载,直至这些破坏点在坐标图中刚好能够形成一个连续的破坏面,此时的矩形荷载即为此地基的极限承载力。此方法不仅可以有效地避免了地基承载力经验公式中一些不合理的假设带来的误差,更符合实际情况,而且可以直观地了解到地基土的三维破坏面。     

双峰型非均匀沙推移运动特性及输移规律

采用图像识别与推移质动态监测技术,开展基于双峰型非均匀推移质的系列水槽试验.通过引入反映床面粗糙度、粘性底层特性与颗粒非均匀度η(粗细比)的综合水流强度函数Ψ_b、特征弗劳德数Fr_b,系统研究了不同水流强度与床沙组成条件下的推移质输移特性以及颗粒非均匀度对输沙率的影响.通过对关键因子的辨识与量纲分析,提出了双峰型非均匀推移质输移模式,建立了基于近壁特征因子的水流强度Ψ_b与非均匀推移质输移强度Φ'的函数关系.对双峰型底沙输移机理的分析表明,非均匀沙的组成特征使得η成为影响Φ'的重要参量;正是细粒对粗粒的解怙作用对粗沙运动产生重要影响,使推移质输移率与颗粒非均匀度间呈现驼峰关系,峰值对应的粗细比η_c约为3∶7.     

中国非点源污染负荷计算研究现状与存在问题

非点源污染负荷计算对水污染总量控制具有重要意义,为分析中国非点源污染负荷计算研究的现状与问题,在系统调研相关文献的基础上,将中国常用的非点源污染负荷计算方法总结为三大类:输出系数模型、实证模型和机理模型,阐述了各种模型的特点及其在中国的研究和应用情况;从非点源污染的界定、产污量和排污量的区别、国内和国外非点源污染产生环境的差异以及平原河网地区非点源污染负荷的计算4个方面分析了中国非点源污染负荷计算研究存在的主要问题;认为模型和计算方法适应研究区的环境特征是研究工作取得成功的关键,今后要加强实证研究、理论研究与模型开发的结合,逐步建立适应中国环境特点的非点源污染负荷计算方法体系。     

花岗岩类与构造迁移

研究表明,花岗岩类表现了在时间上、空间上,及地质性状上的构造迁移特征,具有清晰的侧向、走向迁移规律。构造迁移的产生是由于板块构造运动在时间上、空间上作用强度、俯冲角度等的差异所致。所以,构造迁移是板块构造运动作用不平衡性的一种标志。花岗岩类岩浆作用迁移的运动轨迹,反映了板块构造运动的这一特征。     

用弹性模量缩减法分析刚架结构的极限承载力

首先,综合考虑单元的内力和屈服强度,定义了单元承载比、承载比均匀度以及基准承载比等参数的概念和计算表达式;在此基础上,根据相邻迭代步变形能守恒关系,研究建立弹性模量的调整计算公式,建立了一种新型的弹性模量调整策略;进而提出了刚架结构极限承载力分析的弹性模量缩减法,即通过系统地调整高承载比单元的弹性模量来确定结构的极限荷载下限值。该方法对于结构的局部破坏模式及整体破坏模式分析均具有较好的适用性。算例分析表明,本文方法具有较高的计算精度和计算效率。     

打桩荷载作用下自由场土体振动衰减规律研究

为研究打桩荷载作用下自由场土体振动衰减规律，建立了考虑桩-土相互作用的二维有限元数值模型，并通过Lamb问题解析解验证了数值模型的有效性。通过分析打桩深度、土体阻尼比、打桩荷载等级和土质条件等因素的影响，研究了土体表面振动特性及振动衰减规律。参数分析表明，打桩深度对微振动的影响较小，在距振源一定距离处的土体表面振动响应基本保持一致；土体阻尼比对土体表面振动的影响显著，阻尼比越小，土体表面振动响应越剧烈；不同场地软硬条件影响微振动的限制距离，在一定距离范围内，土质越软，土体表面振动响应越显著，防振距离越长。基于参数分析结果，对峰值速度衰减曲线进行拟合，拟合公式计算结果与模拟结果较吻合，可为振动敏感建筑场地的选择提供参考。     

Late Cenozoic faulting in SW Bulgaria: Fault geometry,kinematics and driving stress regimes. Implications for late orogenic processes in the Hellenic hinterland

We investigate the geometry and kinematics of the faults exposed in basement rocks along the Strouma River in SW Bulgaria as well as the sequence of faulting events in order to place constraints on the Cenozoic kinematic evolution of this structurally complex domain. In order to decipher the successive stress fields that prevailed during the tectonic history, we additionally carried out an analysis of mesoscale striated faults in terms of paleostress with a novel approach. This approach is based on the P–T axes distribution of the fault-slip data, and separates the fault-slip data into different groups which are characterized by kinematic compatibility, i.e., their P and T axes have similar orientations. From these fault groups, stress tensors are resolved and in case these stress tensors define similar stress regimes (i.e., the orientations of the stress axes and the stress shape ratios are similar) then the fault groups are further unified. The merged fault groups after being filled out with those fault-slip data that have not been incorporated into the above described grouping, but which present similar geometric and kinematic features are used for defining the final stress regimes. In addition, the sequence of faulting events was constrained by available tectonostratigraphic data.Five faulting events named D1, D2, D3, D4 and D5 are distinguished since the Late Oligocene. D1 is a pure compression stress regime with σ₁ stress axis trending NNE-SSW that mainly activated the WNW-ESE to ENE-WSW faults as reverse to oblique reverse and the NNW-SSE striking as right-lateral oblique contractional faults during the Latest Oligocene-Earliest Miocene. D2 is a strike-slip − transpression stress regime with σ₁ stress axis trending NNE-SSW that mainly activated the NNW-SSE to N-S striking as right-lateral strike-slip faults and the ENE-WSW striking faults as left-lateral strike-slip ones during the Early-Middle Miocene. D3 extensional event is associated with a NW-SE to WNW-ESE extension causing the activation of mainly low-angle normal faults of NE-SW strike and NNE-SSW to NNW-SSE striking high-angle normal faults. D4 is an extensional event dated from Late Miocene to Late Pliocene. It activated NNW-SSE to NW-SE faults as normal faults and E-W to WNW-ESE faults as right-lateral oblique extensional faults. The latest D5 event is an N-S extensional stress regime that dominates the wider area of SW Bulgaria in Quaternary times. It mainly activated faults that generally strike E-W (ENE-WSW and WNW-ESE) normal faults, along which fault-bounded basins developed. The D1 and D2 events are interpreted as two progressive stages of transpressional tectonics related to the late stages of collision between Apulia and Eurasia plates. These processes gave rise to the lateral extrusion of the Rhodope and Balkan regions toward the SE along the Strouma Lineament. The D3 event is attributed to the latest stage of this collision, and represents the relaxation of the overthickened crust along the direction of the lateral extrusion. The D4 and D5 events are interpreted as post-orogenic extensional events related to the retreat of the Hellenic subduction zone since the Late Miocene and to the widespread back-arc Aegean extension still prevailing today.     

洱海主要污染物允许排放总量的控制分配

基于环境流体动力学模型EFDC(Environmental Fluid Dynamic Code),建立了洱海湖泊及湖湾的三维水动力水质模型.利用洱海2001 2011年连续11年的水动力水质监测数据对模型进行了率定和验证,模拟结果与实测资料吻合度较好,表明水动力水质模型计算结果较为合理.在考虑水质环境背景浓度的前提下,通过水质模型量化各个入湖排污口对水质控制点的贡献率,并对各水质控制点和入湖排污口的浓度进行约束限制,最终利用单纯形法求解得到各入湖排污口的允许排污量.计算结果表明,北区三条河流弥苴河、永安江、罗时江本身流量相对较大,所以允许排放总量也较大,总氮、总磷和COD_Mn的允许排放总量分别占到整个洱海允许排放量的47%、53%和49%.洱海主要污染物允许排放总量的控制分配研究对于洱海流域的环境综合整治具有十分重要的意义.     

不同竖向荷载作用下桩基水平载荷试验研究

石油化工装置具有高、大、重及对地基承载力和沉降变形要求严格等特点,宁波镇海某石油化工项目位于沿海软土地基,工程地质条件差,风荷载大,对桩基的水平承载力要求较高。为了取得符合工程实际情况的桩基水平承载力参数,在工作区内开展了不同桩径、桩长、桩顶竖向荷载作用下的预制方桩桩基的水平静载荷试验。试验结果表明,在桩顶自由条件下,单桩水平承载力随着桩径和桩长的增加而增大,但并非是线性增长,而是呈幂函数增长关系;单桩水平承载力随着桩顶竖向荷载的增加同样呈幂函数增长关系;群桩水平承载力大于单桩水平承载力之和。     

无泥型软弱层带在动荷载作用下的阻尼特征

通过对三组含不同粒度成分的无泥型软弱层带室内土动三轴试验, 表明阻尼比有随动应变增加而增大的趋势, 但粒度成分和含水状态又对阻尼比产生不同的影响。分析显示, 以粗碎屑为特征的无泥型软弱层带对地震动荷载的反应程度可初步认为应属于不明显的土, 即其动力学性质变化 (衰减幅度)较松散～中等密实的饱和砂土要小。