波浪作用下成层海床孔隙水压力响应的简化分析

采用不排水条件下孔隙水压力发展模式,作为Terzagh i一维固结方程中考虑波浪循环作用所引起的孔隙水压力源项,对于成层海床建立了推广的一维动力固结方程,运用数理方程中的分离变量法与G reen函数求解了成层海床在波浪作用下残余孔隙水压力的发展规律,进而对成层海床的液化势进行了评判。对比计算与分析表明,海床表层土的渗透性及其厚度对于海床的整体抗液化性能具有显著的影响,低渗透性的表层导致海床孔隙水压力的显著积累,此时表层置换法是防治液化的有效途径。     

Mechanical compression release device in steel bracing system for retrofitting RC frames

1 Introduction Braced steel frames are commonly used to resist seismic loads. Their seismic behavior was extensively studied during the past decades (Bertero et al.., 1989; Roeder, 1989; Jain, 1978). Their design is governed by the buckling behavior of the bracing members (ASCE, 1994,2002; CSA, 1994). To prevent or delay the seismic buckling of compressive members in concentrically braced frames in steel structures, a great number of methods have been proposed. These include the use of sp…     

海上风机吸力式桶形基础承载特性研究综述

风机基础作为海上风机整体结构的重要组成部分,承受着上部风机所受到的风浪流荷载,并且对风机的安全性及可靠性至关重要。吸力式桶形基础由于其安装简单和可重复利用等优点,在海洋平台基础中得到了广泛应用,并逐步应用于海上风机基础中。但由于海上风机与海洋平台在海洋环境中的荷载工况有一定的差别,仍需要通过对其承载特性研究现状进行全面认识,以实现吸力式桶形基础在海上风机基础中的可靠应用。文中通过总结和评价现有研究对桶形基础在不同土体条件以及荷载条件下进行试验及数值模拟分析得到的研究结果,综述了静荷载和循环荷载作用下砂土和黏土中的吸力式桶形基础的承载特性研究现状,以及海上风机吸力式桶形基础的相关研究。文章展望了目前应用于海上风机基础的桶形基础仍缺乏的研究,为海上风机吸力式桶形基础的可靠应用及后续研究提供重要参考。     

钢管脐带缆扭转平衡设计

钢管脐带缆包含多种螺旋缠绕的功能单元,其在外力载荷下会发生相对运动,而且钢管的刚度较大对扭转平衡有重要影响,因此,相对于普通电缆,钢管脐带缆在扭转平衡设计时更加困难。根据扭转平衡理论公式,采用控制变量法,以第二层铠装钢丝的绞合角度为变量进行扭转平衡设计。首先建立脐带缆缆芯有限元模型,对其施加拉伸载荷,结果显示缆芯出现了扭转,这证明不能将脐带缆缆芯视为一实心圆柱。其次建立不同绞合角度的脐带缆有限元模型,设置各功能单元的材料属性和摩擦系数,分析模型在拉伸载荷下的扭转角度,并将相同拉伸载荷下的扭转角度拟合为直线,从而得到钢管脐带缆在扭转平衡状态时的最优绞合角度。最后,采用试验方法对实物钢管脐带缆进行扭转平衡测试,测试结果显示在拉伸载荷下脐带缆单位长度扭转角度十分微小,这表明缆是扭转平衡的。因此验证了使用的有限元方法在钢管脐带缆扭转平衡设计中的有效性。     

Analysis of resistance factors for LRFD of soil nail pullout limit state using default FHWA load and resistance models

Abstract

Resistance factors for load and resistance factor design (LRFD) of pullout limit state of both permanent and temporary soil nails are calibrated against a wide design space using the current Federal Highway Administration (FHWA) nail load and resistance models. The calculated resistance factors were shown to scatter broadly among design scenarios that differ in wall face batter, soil friction angle, nail ultimate bond strength, and surcharge live load. An important lesson learned from the analysis results is that the current practice of using a single resistance factor for LRFD of nail pullout limit state could not result in uniform reliabilities across different design scenarios. Simple artificial neural network (ANN) models were developed for computation of resistance factors. Design examples demonstrated the ability of the ANN models in providing resistance factors that yield satisfactory and consistent reliabilities in different nail pullout designs.     

一种污水排海的近远区计算与控制方法──以大亚湾水容量计算及污水排海为例

针对点容量计算中混合区限制的要求，采用了动量积分法、经验公式法和有限差分法，分别对污水排放后可能引起的近区、过渡区和远区的污水浓度变化进行了模拟预测，并就一定的限制性条件对容量点近区、高浓度混合区及容量点远区影响范围进行了分析。在大亚湾水容量计算及污水排海规划中的应用表明，该法具有计算机时较省、精度相对较高等优点。     

Direct CPT and CPTu methods for determining bearing capacity of helical piles

Helical piles are structural deep foundation elements, which can be categorized as torque-driven piles without any limitations to implement in marine situations. Different methods are used to predict the axial capacity of helical piles, such as static analysis, but have some limitation for this type of piles on marine conditions. In situ testing methods as supplement of static analysis have been rarely used for helical piles. In geotechnical engineering practice, the most common in situ tests particularly applicable for coastal or offshore site investigation are cone penetration test (CPT) and piezocone penetration test (CPTu). The CPT is simple, repeatable, and prepares the continuous records of soil layers. In this paper, a data bank has been compiled by collecting the results of static pile load tests on thirty-seven helical piles in ten different sites including CPT or CPTu data. Axial capacities of thirty-seven helical piles in different sites were predicted by direct CPT methods and static analysis. Accuracy estimation of ten direct CPT methods to predict the axial capacity of helical piles was investigated in this study. Comparisons have been made among predicted values and measured capacity from the pile load tests. Results indicated that the recently developed methods such as NGI-05 (2005), ICP-05 (2005), and UWA-05 (2005) predicted axial capacity of helical piles more accurately than the other methods such as Meyerhof (1983), Schmertmann (1978), Dutch (1979), LCPC (1982), or Unicone (1997). However, more investigations are required to establish better correlation between CPT data and axial capacity of helical piles.     

潮致泥沙全沙净输运解析模式

泥沙运动作为水流和底床相互作用的纽带,是河流、河口及海岸工程研究的重要内容。在潮波作用明显的河口、海岸地区,周期性的动力作用下的泥沙运动具有往复和可逆的特征,因此研究这类水域的泥沙的净输运更具有实际的意义。基于泥沙输运和流速呈指数关系假设,建立潮流环境下的泥沙全沙净输运的解析解公式,并对该公式的计算结果和数值计算以及数学模型的结果进行了检验和验证,结果表明本研究提出的公式能较好地反应潮流环境下的泥沙净输运。由此,基于本公式采用潮流分潮调和常数可计算得到全沙净输运,并可以分析各分潮流及其相互作用与泥沙净输运的关系。研究结果显示,在受径流影响较大的半日潮河口,S2、MS4、M2三潮相互作用对全沙净输运的贡献显著高于通常的潮流不对称作用,即M2、M4的相互作用。此外,河口区域径流导致的余流对泥沙净输运的贡献不可忽略,特别是在洪季,大径流量条件下往往导致余流较大,其对泥沙净输运的贡献所占比例较大。     

Development of the cyclic p–y curve for a single pile in sandy soil

Pile foundations that support transmission towers or offshore structures are dominantly subjected to cyclic lateral load induced by wind and waves. For a successful design, it is crucial to investigate the effect of cyclic lateral loads on the pile behavior that is loaded laterally. Although the p–y curve method is generally utilized to design the cyclic laterally loaded pile foundations, the effect of cyclic lateral loads on the pile has not been properly implemented with the p–y curve. This reflects a lack of consideration of the overall stiffness change in soil–pile interaction. To address this, a series of model pile tests were conducted in this study on a preinstalled aluminum flexible pile under various sandy soil conditions. The test results were used to investigate the effect of cyclic lateral loads on the p–y behavior. The cyclic p–y curve, which properly takes into account this effect, was developed as a hyperbolic function. Pseudo-static analysis was also conducted with the proposed cyclic p–y curve, which showed that it was able to properly simulate cyclic laterally loaded pile behavior in sandy soil.     

Response and capacity of monopod caisson foundation under eccentric lateral loads

Monopod caisson foundation is a viable alternative for supporting offshore wind turbines located at shallow water depths. This foundation system has to resist overturning moment generated due to resultant lateral load, arising from wind and water wave action, that can act at any loading height above the seabed. This paper presents results of a numerical investigation performed to determine the influence of loading height, caisson geometry and superstructure load on the ultimate lateral capacity, initial stiffness, and soil failure zone of the foundation, when installed in very dense sand. Both the ultimate and serviceable states of the caisson foundation obtained from the analyses are represented in terms of envelopes plotted between lateral load and overturning moment. Simplified expressions, which take into account the influence of caisson geometry, loading height, and soil properties, are also presented to serve as a preliminary base for design of the monopod caisson foundation.