捷联式海洋重力数据的小波阈值滤波

基于捷联式海洋重力测量数据,对比不同小波、阈值及施加方式对滤波效果的影响。结果表明,db6、db7、db8、db9、db10、sym6、sym7、sym8、sym9、sym10、coif3、coif4和coif5小波较适用于海洋重力测量,小波分解层次可取至8层或9层,采用史坦无偏风险阈值滤波效果较好;小波分解至第8、9层时,阈值滤波结果与截止频率为0.005 Hz和0.003 3 Hz的Butterworth低通滤波器的滤波结果吻合较好,但小波阈值滤波结果更加平滑,两者差值的RMSE在0.25 mGal以内,且小波阈值滤波更容易分解出噪声成分,可以更有效地消除重力畸变。     

基于时间序列叶面积指数稀疏表示的作物种植区域提取

以华北平原黄河以北地区为研究区域,以时间序列叶面积指数LAI(Leaf Area Index)傅里叶变换的谐波特征作为不同作物识别的数据源,利用稀疏表示的分类方法识别2007年—2016年冬小麦、春玉米、夏玉米等主要农作物种植区域。首先利用上包络线Savitzky-Golay滤波分别对2007年—2016年的时间序列MODIS LAI曲线进行重构,进而对重构的年时间序列LAI进行傅里叶变换,以0—5级谐波振幅、1—5级谐波相位作为作物识别的依据,基于各类地物的训练样本,通过在线字典学习算法构建稀疏表示方法的判别字典,对每个待测样本利用正交匹配追踪算法求解稀疏系数,从而计算对应于各类地物的重构误差,根据最小重构误差判定待测样本的作物类型,并对作物识别结果的位置精度进行验证。结果表明,2007年—2016年作物识别的总体精度为77.97%,Kappa系数为0.74,表明本文提出的方法可以用于研究区域主要作物种植区域的提取。     

Indoor localization for pedestrians with real-time capability using multi-sensor smartphones

ABSTRACT

The localization of persons or objects usually refers to a position determined in a spatial reference system. Outdoors, this is usually accomplished with Global Navigation Satellite Systems (GNSS). However, the automatic positioning of people in GNSS-free environments, especially inside of buildings (indoors) poses a huge challenge. Indoors, satellite signals are attenuated, shielded or reflected by building components (e.g. walls or ceilings). For selected applications, the automatic indoor positioning is possible based on different technologies (e.g. WiFi, RFID, or UWB). However, a standard solution is still not available. Many indoor positioning systems are only suitable for specific applications or are deployed under certain conditions, e.g. additional infrastructures or sensor technologies. Smartphones, as popular cost-effective multi-sensor systems, is a promising indoor localization platform for the mass-market and is increasingly coming into focus. Today’s devices are equipped with a variety of sensors that can be used for indoor positioning. In this contribution, an approach to smartphone-based pedestrian indoor localization is presented. The novelty of this approach refers to a holistic, real-time pedestrian localization inside of buildings based on multi-sensor smartphones and easy-to-install local positioning systems. For this purpose, the barometric altitude is estimated in order to derive the floor on which the user is located. The 2D position is determined subsequently using the principle of pedestrian dead reckoning based on user's movements extracted from the smartphone sensors. In order to minimize the strong error accumulation in the localization caused by various sensor errors, additional information is integrated into the position estimation. The building model is used to identify permissible (e.g. rooms, passageways) and impermissible (e.g. walls) building areas for the pedestrian. Several technologies contributing to higher precision and robustness are also included. For the fusion of different linear and non-linear data, an advanced algorithm based on the Sequential Monte Carlo method is presented.     

卡尔曼滤波在GPS潮位数据处理中的应用

利用RTK GPS技术测量潮位数据时,在把具体的潮位数据提取出来以后还会存在很多的异常点或不确定点,因此我们要在提取出具体波动的过程中实时的修正,才能得到有效的资料。文中简要介绍了卡尔曼滤波的基本原理,以及如何应用于GPS潮位数据的处理,并通过试验讨论卡尔曼滤波在数据处理中的效果。     

抗差卡尔曼滤波在聊城古建筑动态数据处理中的应用

古建筑在日照、风压等因素的影响下,易产生老化变形,一般会采用及时补救的方法,有时并没有分析其根本原因,本文在布设动态监控网,获得监控数据后,用抗差卡尔曼滤波对监控数据进行分析的方法,对变形方向进行预测,预测值与平差值的误差均在限差范围内,且变化方向大致相同,可以将它作为古建筑变形方向的预报,做到防患于未然。     

基于灰关联分析方法卡尔曼滤波器的精度效能评估

针对综导系统卡尔曼滤波器的特点,深入研究了灰关联分析法在滤波器精度效能评估中的应用。给出卡尔曼滤波器进行灰关联分析的方法和步骤,并对某一类型的滤波器进行精度效能评估。仿真结果表明了该方法的可行性和有效性。     

基于AR（p）的卡尔曼滤波在GPS变形监测中的应用

由于AR（p）模型结构比较简单且计算比较方便,在变形分析中,目前常采用此模型建立变形模型。然而单纯的AR模型把模型参数作为定值,变形数据拟合误差及变形预测误差可能会比较大。介绍了将卡尔曼滤波引入AR模型,利用观测数据建立AR模型,即建立观测方程;以AR模型的参数为状态向量建立状态方程。从而形成动态系统的卡尔曼滤波函数模型,动态计算出AR模型的参数以便预测。此方法快速、实时,且占有较少内存,充分利用了AR模型和卡尔曼滤波二者的优点。     

Consideration of time-correlated errors in a Kalman filter applicable to GNSS

An algorithm for considering time-correlated errors in a Kalman filter is presented. The algorithm differs from previous implementations in that it does not suffer from numerical problems; does not contain inherent time latency or require reinterpretation of Kalman filter parameters, and gives full consideration to additive white noise that is often still present but ignored in previous implementations. Simulation results indicate that the application of the new algorithm yields more realistic and therefore useful state and covariance information than the standard implementation. Results from a field test of the algorithm applied to the problem of kinematic differential GPS demonstrate that the algorithm provides slightly pessimistic covariance estimates whereas the standard Kalman filter provides optimistic covariance estimates.     

观测值含有粗差的抗差粒子滤波算法

作为非线性滤波的代表,粒子滤波得到广泛应用。该算法通过随机生成的具有权重的样本（粒子）来计算后验概率密度。其中赋权的过程需要综合系统信息和观测信息,当观测值含有粗差时,会使粒子错误赋权影响滤波结果。提出一种新的基于抗差估计的抗差粒子滤波算法,通过计算粒子等价权,抑制观测值粗差的影响。模拟计算分析表明,当观测值含有粗差时,与标准粒子滤波相比,该方法能有效提高滤波精度。     

基于噪声随机模型的加权观测融合方法

信息融合技术中,在各局部传感器的有色观测噪声为一阶AR模型的情况下,可以利用观测扩增方法消除有色噪声的影响,得到最优加权观测融合方程,从而实现状态的最优滤波解。对于有色观测噪声为MA或ARMA模型的情况,观测扩增方法不再适用。提出了基于有色观测噪声随机模型级数展开的方法,求解出各局部传感器有色观测噪声的方差,并利用该方差对加权观测融合滤波器进行了构造。通过计算实例证明,该方法不仅适用于观测噪声为AR模型,同时适用于噪声MA或ARMA模型。