盾构隧道下穿管道施工引起的管-土相互作用研究

采用Loganathan公式研究了盾构隧道下穿管道施工引起的地下管道处土体竖向位移,利用考虑土中剪力传递的Pasternak模型模拟管-土相互作用,运用修正Vlasov模型中的迭代流程计算出Pasternak模型的关键参数——弹性系数k与剪切系数gs。将计算结果与已有文献结果及工程监测数据进行对比,深入分析了迭代求解k、gs值的Pasternak模型与传统模型的计算差异,并进一步研究了土中剪力、管道与隧道的夹角、土体弹性模量及隧道半径的变化对管-土相互作用的影响。研究结果表明：迭代求解的k、gs值能提升Pasternak模型的精确度;土中剪力对管道竖向位移计算值的影响可达15.3%;随着管道与隧道夹角的减小,管道的竖向位移增大、弯矩减小;土体弹性模量与隧道半径的增大均会增加管道的竖向位移和弯矩。     

沿107.6°E南北向剖面鄂尔多斯地块及周缘地区地壳结构

鄂尔多斯地块紧邻青藏高原东北缘,位于华北克拉通的西部,在我国中生代、新生代以来东部地区的构造活动中起到了重要作用.对鄂尔多斯及其周缘地区的研究可以提供有关华北克拉通的形成、演化和破坏过程的重要信息.本文选取了纵贯鄂尔多斯的107.6°E附近南北剖面上的44个流动地震台站进行分析,采用接收函数方法,进行Kirchhoff偏移成像,并且结合在该区域内前人的地震面波频散进行联合反演,获得剖面下方的地壳内部精细结构.研究结果显示:(1)莫霍面在鄂尔多斯北部较平缓,约45km深;在鄂尔多斯南部有所加深,达到50km;其北边的河套盆地的地壳厚度约为50km;南边的渭河盆地到秦岭地区及四川盆地的地壳厚度从约为40km增厚到47～50km.(2)河套盆地下方存在大规模的低速异常,最深可达25km,反映了其显著的拉张构造和沉积历史.(3)秦岭造山带下方的低速异常对应于其主要为长英质的地壳组分,可能是由于中生代的拆沉作用导致的地壳下部基性岩石层的缺失.(4)以38°N为界的鄂尔多斯地块,南北部地壳速度结构存在差异,可能表明了这两部分经历的构造历史不同.     

空-地-井重力异常正则化协同密度反演方法

围绕综合利用空-地-井多源重力异常联合反演提升精度的目标,提出正则化协同密度反演方法,从而有效利用多维数据的横向和纵向变化特征提高反演精度,且无需先验信息的约束.此外,还提出利用奇异值谱和深度分辨率工具评价航空数据观测高度和层数对反演分辨率的影响.通过理论模型试验本文方法在空-地、地-井等不同情况下的应用效果,结果表明空-地-井重力异常正则化协同密度反演方法能获得更高分辨率、高精度的反演结果,且证明不同的钻孔位置对反演结果有较大的影响,从而可指导实际的空-地-井联合勘探.最后,利用文顿盐丘实际勘探数据进行空地和空地井重力数据协同反演,反演结果垂向分辨率明显优于地面观测数据反演结果,盐盖的顶面及中心埋深与前人研究和地质资料解释相吻合,验证了方法正确性及实用性,为推进我国空-地-井立体重磁勘探提供了重要的技术手段.     

Incorporating known petrophysical model in the seismic full-waveform inversion using the Gramian constraint

In this paper, we develop a general approach to integrating petrophysical models in three-dimensional seismic full-waveform inversion based on the Gramian constraints. In the framework of this approach, we present an example of the frequency-domain P-wave velocity inversion guided by an electrical conductivity model. In order to introduce a coupling between the two models, we minimize the corresponding Gramian functional, which is included in the Tikhonov parametric functional. We demonstrate that in the case of a single-physics inversion guided by a model of different physical type, the general expressions of the Gramian functional and its gradients become simple and easy to program. We also prove that the Gramian functional has a non-negative quadratic form, so it can be easily incorporated in a standard gradient-based minimization scheme. The developed new approach of seismic inversion guided by the known petrophysical model has been validated by three-dimensional inversion of synthetic seismic data generated for a realistic three-dimensional model of the subsurface.     

考虑尺寸效应的近海桥梁天然橡胶隔震支座力学性能老化时变规律研究

目前天然橡胶支座（NRB）的性能研究大多未考虑尺寸效应,在前期开展的近海桥梁隔震支座和材料老化时变规律研究的基础上,同时考虑支座直径尺寸变化和老化作用时间的影响对NRB的性能进行研究。首先采用ABAQUS有限元软件对不同直径尺寸NRB的性能进行分析,得到了NRB性能随直径尺寸的变化规律;然后结合前期老化作用对NRB及其橡胶材料性能时变规律的影响研究成果,分析了直径尺寸及老化作用时间共同作用下,NRB性能的变化规律,并通过ABAQUS有限元分析,验证了该变化规律的准确性。结果表明:NRB的水平刚度和竖向刚度均随其直径尺寸的增大呈正比例增大趋势;NRB水平刚度比和竖向刚度比均随老化作用时间的增长呈线性增大趋势;且直径为150mm的NRB在实际环境老化60a后,其水平刚度和竖向刚度的增长幅度分别为:30.8%和16.41%,由此可见老化作用时间对NRB水平刚度的影响较显著,对其竖向刚度的影响较小。研究内容可为隔震桥梁结构中支座缩尺模型试验的相关设计提供参考,并为将实验室缩尺橡胶隔震支座的相关成果较好地应用于实际工程计算及设计中提供依据。     

新疆天山地区壳幔S波速度结构特征及变形分析

天山地区地质构造复杂,地震活动频繁,其壳幔变形和深部结构一直受到学者们的高度关注.然而,由于天山地区地震台站资料较少,致使壳幔变形研究结果与解释存在诸多争议.本研究利用在天山地区（40°N-46°N,78°E-92°E）新布设的11个流动宽频带地震台站和该地区39个固定台站的观测资料,采用接收函数与面波联合反演方法,获得了研究区地壳厚度及壳幔S波速度结构.反演结果显示天山地区（41.5°N-44°N,78°E-88°E）平均地壳厚度为56 km,塔里木盆地（40°N-41.5°N,79°E-90°E）、准噶尔盆地（44°N-46°N,82°E-90°E）和吐鲁番盆地（42°N-43°N,88°E-90°E）具有较厚的沉积层,地壳平均厚度为43 km、53 km和46 km,整体表现为天山厚、盆地相对较薄的特征;在研究区南天山的最高峰（42°N,80.5°E）及北天山的最高峰（43.5°N,86°E）附近,中下地壳存在较厚的低速层,我们认为在强烈挤压作用下低速、低强度的中下地壳强烈变形可能是导致该区域快速隆升的主要原因.在研究区中部,位于塔里木盆地与准噶尔盆地之间的天山地区,中下地壳及上地幔均存在低速层,且盆地莫霍面向天山倾斜明显.结合前人的研究成果推测,在南北向构造挤压应力作用下,塔里木盆地与准噶尔盆地发生了向天山造山带方向的双向壳幔层间插入俯冲.在研究区东部,塔里木盆地东北缘与天山东部接触带的地壳内没有明显的低速层,推测应处在早期挤压变形状态,该区域的壳幔边界为缓变的速度梯度带,可能与上地幔热物质侵入或渗透有关.     

晋冀蒙交界地区最小一维速度模型联合反演

文章使用内蒙古地震台网记录到的晋冀蒙交界地区517个定位地震,在参考原始编目报告的基础上,用和达法拟合走时曲线删除错误数据,使用Kissling方法联合反演得到晋冀蒙交界地区最小一维P波速度模型和震源位置。结果显示,研究区P波速度随着深度增加而递增,无明显间断面,联合反演得到的震中位置较原始报告分布更集中,簇状分布更明显。     

Seismic responses of postyield hardening single–degree-of-freedom systems incorporating high-strength elastic material

It is widely accepted that ductility design improves the seismic capacity of structures worldwide. Nevertheless, inelastic deformation allows serious damage to occur in structures. Previous studies have shown that a certain level of postyield stiffness may reduce both the peak displacement and residual deformation of a structure. In recent years, several high-strength elastic materials, such as fiber-reinforced polymer (FRP) and high-strength steel bars, have been developed. Application of these materials can easily provide a structure with a much higher and more stable postyield stiffness. Many materials, members, and structures that incorporate both high-strength elastic materials and conventional materials show significant postyield hardening (PYH) behaviors. The significant postyield stiffness of PYH structures can help effectively reduce both peak and residual deformations, providing a choice when designing resilient structures. However, the findings of previous studies of structures with elastic-perfectly plastic (EPP) behavior or small postyield stiffness may not be accurate for PYH structures. The postyield stiffness of a structure must be considered an important primary structural parameter, in addition to initial stiffness, yielding strength, and ductility. In this paper, extensive time history and statistical analyses are carried out for PYH single–degree-of-freedom (SDOF) systems. The mean values and coefficients of variation of the peak displacement and residual deformation are obtained and discussed. A new R-μ_p-T-α relationship and damage index for PYH structures are proposed. A theoretical model for the calculation of residual deformation is also established. These models provide a basis for developing the appropriate seismic design and performance evaluation procedures for PYH structures.     

Estimated mass and stiffness matrices of shear building from modal test data

A method that estimates mass and stiffness matrices of shear building from modal test data is presented in this paper. The method depends on only measurable points that are less in number than the total structural degrees of freedom, and on the first two orders of structural mode measured. So it is applicable to most of the general test. Based on this method modal data of unmeasurable points are estimated, then global mass and stiffness matrices of structure are obtained by using the first two orders of modal data. Taking advantage of iteration the optimum global mass and stiffness matrices are gained. Finally, an example is studied in this paper. Its result shows that this method is reliable. © 1998 John Wiley & Sons, Ltd.     

Experimental investigation of the vertical pullout cyclic response of bucket foundations in sand

A series of 1 g model tests was conducted to investigate the accumulated vertical pullout displacement and unloading stiffness of bucket foundations embedded in dry and saturated sands. The foundations were subjected to vertical pullout cyclic loading with different load amplitudes. Cyclic load was applied up to 10⁴ cycles. Test results showed that the accumulated vertical pullout displacement increased with the increase in the number of load cycles and cyclic load amplitudes. The unloading stiffness of the bucket foundations decreased with the increase in load amplitude and number of cycles. Empirical equations were proposed based on the test results to evaluate the accumulated vertical pullout displacement and unloading stiffness of the bucket foundations in saturated sand. These equations can be used for the preliminary design of single or tripod bucket foundations.