Paleogene magmatism and gold metallogeny of the Jinping terrane in the Ailaoshan ore belt,Sanjiang Tethyan Orogen (SW China): Geology,deposit type and tectonic setting

The Jinping terrane is situated in the southern segment of the Ailaoshan ore belt, Sanjiang Tethyan Orogen (SW China). The Paleogene intrusions in Jinping consist of syenite porphyry, fine-grained syenite and biotite granite stocks/dikes, and contain relatively low TiO₂ (0.21–0.38 wt%), P₂O₅ (0.01–0.35 wt%), and high Na₂O (2.00–4.62 wt%) and K₂O (4.48–7.06 wt%), belonging to high-K alkaline series. Paleogene gold mineralization in Jinping comprises four genetic types, i.e., orogenic, alkali-rich intrusion-related, porphyry and supergene laterite. The NW–NNW-trending faults and their subsidiaries are the major ore-controlling structures. The orogenic Au mineralization, dominated by polymetallic sulfide-quartz veins, occurs in the diorite and minor in Silurian-Devonian sedimentary rocks. It contains a CO₂-rich mesothermal fluid system generated from the mixing of mantle-derived fluids with crustal-derived metamorphic fluids, and the ore-forming materials were upper crustal- or orogenic-derived. The alkali-rich intrusion-related Au mineralization is hosted in the Ordovician-Silurian sedimentary rocks and minor in the Paleogene alkaline intrusions, and the Au orebodies occur predominantly in the alteration halos. It contains a CO₂-bearing, largely metamorphic-sourced mesothermal fluid system, and the ore-forming materials were derived from the ore-hosting rocks and minor from the alkali-rich intrusions. The porphyry Cu-Mo-Au mineralization occurs in the granite/syenite porphyries and/or along their contact skarn, with the mineralizing fluids being magmatic-hydrothermal in origin. The former two hypogene Au mineralization types in Jinping were mainly formed in the late Eocene (ca. 34–33 Ma) and slightly after the porphyry Cu-Mo-Au mineralization (ca. 35–34 Ma), which is coeval with the regional Himalayan orogenic event. Subsequent weathering produced the laterite Au mineralization above or near the hypogene Au orebodies.     

稠油热采储层非均质性及其对开发的影响——以辽河西部凹陷某试验区于楼油层为例

本文以辽河西部凹陷某试验区为例,基于7 口井岩心、镜下薄片、分析测试及400口井测井等多种资料,采取点、线、面相结合的研究思路,利用地质统计学方法,开展稠油热采储层非均质性研究。整体上,于楼油层储层非均质性较强,储层非均质性受沉积作用、成岩作用和构造作用等影响（以沉积作用为主）。单井岩电特征与层内韵律非均质性关系密切,目的层可见3种沉积韵律模式,包括正韵律、反韵律和复合韵律（其中以正韵律和复合韵律为主）。沉积微相空间上的快速变化,导致储层非均质性增强。单层之间隔层分布较稳定,隔层厚度多大于2 m。非均质性强、中、弱的区域大体呈条带状,以北西-南东向展布,与物源方向基本一致。储层非均质性直接影响到了油藏的开发效果,研究储层非均质性可为油藏开发方式的转换提供参考。     

Formation of chlorite rims and the impact of pore-lining chlorite on reservoir quality: a case study from Shiqianfeng sandstones in upper Permian of Dongpu Depression,Bohai Bay Basin,eastern China

The source material, precursor and formation processes of chlorite rims, and impact of pore-lining chlorite on reservoir quality of the Shiqianfeng sandstones, Dongpu Depression, Bohai Bay Basin, China, are studied using an integrated approach, including core observation, point-count analysis of thin-sections, scanning electron microscopy, electron microprobe analysis and cathode luminescence. The petrographic analysis shows that chlorite rims consist of grain-coating chlorite, poorly crystalline pore-lining chlorite and euhedral-crystallised pore-lining chlorite. The chemical composition shows that pore-lining chlorite is mainly Fe-rich with an average of 0.785 for Fe/(Fe+Mg) ratio. Petrographic analysis shows a large amount of volcanic dust (3.0～16.0 vol%, average of 7.93 vol%) in Shiqianfeng sandstones, which determines the formation of poorly crystalline pore-lining chlorite. Transformation of volcanic dust to smectite rims started with shallow burial depth at an early diagenetic stage, followed by in situ alteration of the smectite rims to poorly crystalline chlorite rims. Euhedral-crystallised chlorite mainly develops in sandstones with high porosity, high permeability and open flow systems. Pore-lining chlorite can inhibit quartz overgrowth but cannot effectively prevent pore-filling of authigenic quartz, carbonate and kaolinite cements, and therefore cannot prevent porosity destruction. However, the occurrence of pore-lining chlorite is a barometer of good reservoir quality and intense hydrodynamic conditions.     

鄂尔多斯盆地延长组超低渗透油藏形成过程分析--以古峰庄-麻黄山地区为例

鄂尔多斯盆地古峰庄-麻黄山地区长6、长8超低渗透油藏具有典型性和代表性。通过流体包裹体均一温度与沉积埋藏史-热史综合分析表明,古峰庄-麻黄山地区长6、长8油藏为一期成藏,成藏时间为早白垩世。成藏过程中,长7油源成藏早期向长8单向充注,成藏中期向长6、长8双向充注,成藏后期则向长6单向充注。成藏过程的这种动态变化主要由源储距离及其垂向组合关系、油源岩生烃高峰、储层边致密边成藏等成藏要素联合作用控制。     

南海西部高温高压小井眼水平井钻完井储层保护技术研究及应用

南海西部东方13-1气田D7H井为国内海上第一口高温高压水平井,储层物性以中低渗为主,使用高固相含量的钻井液易堵塞油气泄流通道造成储层伤害,加之海上完井方式制约,高密度钻井液在井眼滞留时间达10 d以上,不可避免地会加剧储层伤害程度。为充分保障该井储层保护效果,室内开展了大量的优选评价实验,优选出适合海上高温高压小井眼水平井钻完井储层保护油基钻井液,分析了高密度钻井液污染储层的机理,研究了返排压差、返排时间与岩心渗透率恢复结果的关系,提出了增加返排压差、延长返排时间提高储层保护效果的措施。实验结果表明：高温环境下高密度钻井液污染岩心后,初始渗透率恢复值约85%,当污染时间达到15 d时,渗透率恢复值骤降至30%,表明钻井液在储层滞留时间越长储层污染现象越严重;相同驱替条件下,渗透率恢复值随时间的延长而提高并趋于稳定;增加岩心返排时的压差有利于提高渗透率恢复值,返排压差达到12 MPa时,钻井液体系的渗透率恢复值可提高到80%以上。现场应用表明,D7H井试井机械表皮系数为0,清喷产量6.0×105 m3/d,超出配产产量近3倍,储层保护效果良好,为后续海上高温高压气田实施水平井进行规模化开发提供了宝贵的借鉴意义。     

Effects of Deep Fluids on Hydrocarbon Generation and Accumulation in Chinese Petroliferous Basins

Deep fluids in a petroliferous basin generally come from the deep crust or mantle beneath the basin basement, and they transport deep substances(gases and aqueous solutions) as well as heat to sedimentary strata through deep faults. These deep fluids not only lead to large-scale accumulations of CO_2, CH_4, H_2, He and other gases, but also significantly impact hydrocarbon generation and accumulation through organic-inorganic interactions. With the development of deep faults and magmatic-volcanic activities in different periods, most Chinese petroliferous basins have experienced strong impacts associated with deep fluid activity. In the Songliao, Bohai Bay, Northern Jiangsu, Sanshui, Yinggehai and Pearl Mouth Basins in China, a series of CO_2 reservoirs have been discovered. The CO_2 content is up to 99%, with δ~(13)C_(CO2) values ranging from-4.1‰ to-0.37‰ and ~3He/~4He ratios of up to 5.5 Ra. The abiogenic hydrocarbon gas reservoirs with commercial reserves, such as the Changde, Wanjinta, Zhaozhou, and Chaoyanggou reservoirs, are mainly distributed in the Xujiaweizi faulted depression of the Songliao Basin. The δ~(13)CCH4 values of the abiogenic alkane gases are generally -30‰ and exhibit an inverse carbon isotope sequence of δ~(13)C_(CH4)δ~(13)C_(C2H6)δ~(13)C_(C3H8)δ~(13)C_(C4H10). According to laboratory experiments, introducing external H_2 can improve the rate of hydrocarbon generation by up to 147% through the kerogen hydrogenation process. During the migration from deep to shallow depth, CO_2 can significantly alter reservoir rocks. In clastic reservoirs, feldspar is easily altered by CO_2-rich fluids, leading to the formation of dawsonite, a typical mineral in high CO_2 partial pressure environments, as well as the creation of secondary porosity. In carbonate reservoirs, CO_2-rich fluids predominately cause dissolution or precipitation of carbonate minerals. The minerals, e.g., calcite and dolomite, show some typical features, such as higher homogenization temperatures than the burial temperature, relatively high concentrations of Fe and Mn, positive Eu anomalies, depletion of 18 O and enrichment of radiogenic ~(87)Sr. Due to CO_2-rich fluids, the development of high-quality carbonate reservoirs is extended to deep strata. For example, the Well TS1 in the northern Tarim Basin revealed a high-quality Cambrian dolomite reservoir with a porosity of 9.1% at 8408 m, and the Well ZS1 C in the central Tarim Basin revealed a large petroleum reserve in a Cambrian dolomite reservoir at ~6900 m. During the upward migration from deep to shallow basin strata, large volumes of supercritical CO_2 may extract petroleum components from hydrocarbon source rocks or deep reservoirs and facilitate their migration to shallow reservoirs, where the petroleum accumulates with the CO_2. Many reservoirs containing both supercritical CO_2 and petroleum have been discovered in the Songliao, Bohaiwan, Northern Jiangsu, Pearl River Mouth and Yinggehai Basins. The components of the petroleum trapped with CO_2 are dominated by low molecular weight saturated hydrocarbons.     

低渗透油藏菱形反九点井网不等缝长优化研究

在低渗透油藏开发中广泛使用菱形反九点井网,但针对不同位置生产井及注水井的裂缝缝长配比关系还缺少广泛深入的研究。基于长庆油田某低渗透油藏参数,建立了数值模拟模型,在菱形反九点井网中分别设置不同的边井、角井和注水井裂缝穿透比,研究不同裂缝配置模式对水驱开发效果的影响。流线模拟及数值模拟计算结果表明,在注水开发中,注水井缝长是影响油田产液量及水驱效果的关键因素;边井裂缝较角井裂缝更易见水,对油田综合含水影响较大,在菱形反九点井网中需要进行不等缝长优化设计;边井裂缝缝长对水驱效果的影响分为早、中、晚期(Ⅰ、Ⅱ、Ⅲ)曲线段,随着注水井裂缝穿透比增加,早期(Ⅰ)曲线段增长,中期(Ⅱ)曲线段缩短,而晚期(Ⅲ)曲线段变化较小;随着角井裂缝穿透比增加,采出程度逐渐增大,当角井裂缝穿透比较大时,存在“反转”现象;随着注水井裂缝穿透比增加,角井裂缝优化穿透比减小,而边井裂缝优化穿透比增加。该研究成果对于指导低渗透油藏菱形反九点井网裂缝优化设计,提高波及系数和开发效果具有重要的指导意义。     

高温高盐高黏油藏缔合聚合物-表面活性剂二元驱技术

针对大港油田孔南地区高温、高盐、中低渗、稠油等制约化学驱提高采收率的瓶颈技术问题,以官109 1断块枣Ⅴ油组为目标油藏,在优选适合缔合聚合物和表面活性剂基础上,进行聚合物-表面活性剂二元驱技术室内实验和现场应用研究。通过室内实验优选,缔合聚合物AP P7和表面活性剂BHS 01二元体系溶液与常规体系相比,具有较好的耐温抗盐性,拓展了常规二元驱适用油藏的温度和矿化度范围;缔合聚合物经过岩心剪切后仍能够有效建立阻力系数和残余阻力系数;通过岩心驱替实验,体系能有效提高稠油油藏的采收率,拓宽了聚合物驱适用的原油黏度范围;矿场单井试注后,注入井注入压力和启动压力升高,纵向吸水剖面得到改善,说明该体系在高温高盐条件下仍能保持较高黏度,能够有效改善水油流度比,效果明显。     

长江上游干流梯级水库群防洪库容互用性初探

根据《长江流域防洪规划》,长江上游已投入运行的、具有防洪功能的大型控制性水库总预留防洪库容超360亿m3,亟需研究科学实用的防洪调度方法。在定义防洪库容互用性涵义的基础上,探讨了长江上游水库群间防洪库容的互用性,提出了基于库容互用性的水库群防洪调度方法。以金沙江下游梯级和三峡水库为例,分析了二者之间防洪库容的互用比例。研究结果显示,对于1981年、1982年和1998年3个典型年的洪水,金沙江下游梯级水库相对于三峡水库防洪库容的互用比例在0.80~0.97之间,并受拦蓄洪量比例和拦蓄时机的影响。在实时防洪预报调度中,可根据水库群所处状态及防洪形势,基于防洪库容互用性研究成果,结合水文气象预报,科学有效地调度洪水。     

辽河油田D块中—厚层稠油油藏隔夹层的分类及识别

充分利用研究区Ng油层、XLT油层取芯井的岩芯资料和测井等资料,识别并划分出不同类型的隔夹层。研究区主要发育泥质隔夹层、物性隔夹层和砾岩隔夹层,以泥质隔夹层和物性隔夹层为主。从定性和定量两方面采用多学科、多信息对该区的隔夹层进行精细研究,建立隔夹层识别的定性、定量识别标准,为隔夹层的精细刻画奠定基础,为提高稠油热采开发效果提供地质依据