A geographical analysis of the Atalanti alluvial plain and coastline as the location of a potential tourist site, Bronze through Early Iron Age Mitrou, East-Central Greece

Tourism accounts for 15% of Greece’s gross domestic product. In the wake of a struggling economy many of Greece’s coastal villages have turned to tourism to supplement local economies. Preliminary analysis of structural and cultural materials recovered from an excavation on Mitrou, a small islet near the coastal village Tragana located 140 km north of Athens has established the site’s contribution to a fuller understanding of settlement practices in Central Greece from the end of the Bronze Age through the Early Iron Age. The site’s historic importance combined with its scenic coastal setting has considerable potential to be developed into an important tourist site. The physical geography of the region is the product of the complex interaction of coastal, alluvial, fluvial, and seismic processes. This investigation integrates the archaeological material with a geographical analysis employing a variety of geographical techniques (soil and sediment analysis, past climatic data, environmental surveys, and geospatial modeling) to reconstruct the geomorphological history of the site and to evaluate the area as a potential tourist site.     

Change in the magnetic properties of bituminous coal intruded by an igneous dike, Dutch Creek Mine, Pitkin County, Colorado

Magnetization measurements have been made on natural coke–coal samples collected at various distances from a felsic porphyry dike in a coal seam in Dutch Creek Mine, Colorado to help characterize the nature and distribution of the iron-bearing phases. The magnetization passes through a maximum at the coke-to-coal transition about 31 cm from the dike contact. The magnetic measurements support the geochemical data indicating that magmatic fluids along with a high-temperature gas pulse moved into the coal bed. Interaction of the magmatic fluids with the coal diminished the reducing power of the thermal gas pulse from the dike to a point about 24 cm into the coal. The hot reducing gas penetrated further and produced a high temperature (400–525°C) zone (at about 31 cm) just ahead of the magmatic fluids. Metallic iron found in this zone is the principal cause of the observed high magnetization. Beyond this zone, the temperature was too low to alter the coal significantly.     

Expected and observed conditions during the SAGE iron addition experiment in Subantarctic waters

The SAGE iron addition experiment was conducted from R.V. Tangaroa east of South Island, New Zealand, in late March-early April 2004. A desktop survey of climatological data was completed before the experiment, providing information to inform site selection and experiment design. The desktop survey is presented here in updated and enhanced form in order to explain the site selection and describe the conditions expected at the site during the experiment in comparison with those actually encountered.The experiment site was in Subantarctic waters between the Subtropical and Subantarctic Fronts. These waters are characterised by high surface macronutrient concentration, low iron concentration and low chlorophyll. The preferred site based on the desktop survey was in the vicinity of 173.5°E, 47.5°S, in Southern Bounty Trough. The actual release location was chosen immediately before the release and was 112 km to the northwest of this at 172°32′E, 46°44′S. The surface water here has typically come from the southwest (over the northern Campbell Plateau) or the southeast (through Pukaki Gap) and the mean current is directed towards ENE at ∼0.1 m s⁻¹. The release location is well removed from regions of high eddy kinetic energy to the east (where the Subantarctic Front reaches its northern limit) and the west (where fine-scale instabilities develop on the Southland Front, which flows along the continental shelf). Typical conditions at the release site at the end of March are: surface temperature 12 °C; mixed layer depth 40 m; surface chlorophyll concentration ∼0.3 mg m⁻³; surface photosynthetically active radiation (PAR) 23 E m⁻² d⁻¹; surface nutrient concentrations 8-10 mmol m⁻³ (nitrate), 0.5-0.8 mmol m⁻³ (phosphate), 1-2 mmol m⁻³ (silicate) and 0.1-0.5 nM (iron); 99th percentile wind speed 19-21 m s⁻¹. At this time of year, surface PAR is well below its summer maximum, the mixed layer is beginning its seasonal deepening and the silicate concentration is at its seasonal minimum. These factors may have limited the phytoplankton response to iron addition and were compounded in March-April 2004 by strong winds early in the experiment (substantially exceeding the 99th percentile in speed), lower than the average SST, larger than the average mixed layer depth, silicate concentration at the bottom end of the expected range and initially low PAR.     

环境植物样品中铜铅锌铁锰的测定

将环境植物样品在４００─５００℃灰化，用硝酸、氢氟酸和高氯酸分解，用盐酸（１＋１）提取，控制２％─３％的盐酸介质，用火焰原子吸收分光光度法测定环境植物样品中的微量铜、铅、锌、铁、锰。该方法简单、快速、可靠。对环境植物标准样品的测定结果理想。     

Numerical modeling of water yield of mine in Yangzhuang Iron Mine,Anhui Province of China

This study develops a three-dimensional heterogeneous numerical model to simulate the water inrush process and predict the water yield for mineral exploration in Yangzhuang Iron Mine in Anhui Province. To identify the hydrogeological parameters of the aquifer in the study area, the model was calibrated and validated using the observed heads through the integrated trial-and-error and automated techniques. Also, the sensitivity analysis of the model was performed to evaluate the uncertainty associated with the calibrated model. According to the mine construction plan at different mining levels of -500 m, -600 m, and -700 m, the calibrated model was then applied to predict the water yields dependent on the different mining levels. As indicated by the prediction results, the numerical simulation model can systematically describe the groundwater system in the mining area and determine the source of water inrush in this iron mine. In conclusion, numerical analyses carried out in this study can provide guidance to decision-makers in balancing the iron ore mining and mine dewatering in the future.     

海洋中铁的来源、形态和对初级生产力的限制作用

在海洋中,铁和Ｎ、Ｐ等主营养盐一样,也是一种限制浮游植物初级生产力的重要因素。由于铁是一种化学活性较高的元素,所以海水中铁的存在形态、来源及沉降会直接影响其生物可利用性。目前人们一般采用预富集／原子吸收法（ＡＡＳ）或是借助于电分析技术（如催化极谱）来测定海水中的铁。     

Trends in the solubility of iron,aluminium, manganese and phosphorus in aerosol collected over the Atlantic Ocean

The solubility of iron, aluminium, manganese and phosphorus has been determined in aerosol samples collected between 49°N and 52°S during three cruises conducted in the Atlantic Ocean as part of the European Union funded IRONAGES programme. Solubilities (defined at pH 4.7) determined for Fe and Al in samples of Saharan dust were significantly lower (medians 1.7% and 3.0%, respectively) than the solubilities of these metals in aerosols from other source regions (whole dataset medians 5.2% and 9.0%, respectively). Mn solubility also varied with aerosol source, but the median solubility of Mn in Saharan dust was very similar to the median for the dataset as a whole (55% and 56%, respectively). The observed solubility of aerosol P was ∼ 32%, with P solubility in Saharan aerosol perhaps as low as 10%. Laboratory studies have indicated that aerosol Fe solubility is enhanced by acid processing. No relationship could be found between Fe solubility and the concentrations of acid species (non-seasalt SO₄²⁻, NO₃⁻) nor the net acidity of the aerosol, so we are unable to confirm that this process is significant in the atmosphere. In terms of the supply of soluble Fe to oceanic ecosystems on a global scale, the observed higher solubility for Fe in non-Saharan aerosols is probably not significant because the Sahara is easily the dominant source of Fe to the Atlantic. On a smaller scale however, higher solubility for aerosol Fe may alter our understanding of Fe cycling in regions such as the remote Southern Ocean.     

A community-wide intercomparison exercise for the determination of dissolved iron in seawater

The first large-scale international intercomparison of analytical methods for the determination of dissolved iron in seawater was carried out between October 2000 and December 2002. The exercise was conducted as a rigorously “blind” comparison of 7 analytical techniques by 24 international laboratories. The comparison was based on a large volume (700 L), filtered surface seawater sample collected from the South Atlantic Ocean (the “IRONAGES” sample), which was acidified, mixed and bottled at sea. Two 1-L sample bottles were sent to each participant. Integrity and blindness were achieved by having the experiment designed and carried out by a small team, and overseen by an independent data manager. Storage, homogeneity and time-series stability experiments conducted over 2.5 years showed that inter-bottle variability of the IRONAGES sample was good (< 7%), although there was a decrease in iron concentration in the bottles over time (0.8–0.5 nM) before a stable value was observed. This raises questions over the suitability of sample acidification and storage.     

Primary production in the eastern tropical Pacific: A review

The eastern tropical Pacific includes 28 million km² of ocean between 23.5°N and S and Central/South America and 140°W, and contains the eastern and equatorial branches of the north and South Pacific subtropical gyres plus two equatorial and two coastal countercurrents. Spatial patterns of primary production are in general determined by supply of macronutrients (nitrate, phosphate) from below the thermocline. Where the thermocline is shallow and intersects the lighted euphotic zone, biological production is enhanced. In the eastern tropical Pacific thermocline depth is controlled by three interrelated processes: a basin-scale east/west thermocline tilt, a basin-scale thermocline shoaling at the gyre margins, and local wind-driven upwelling. These processes regulate supply of nutrient-rich subsurface waters to the euphotic zone, and on their basis we have divided the eastern tropical Pacific into seven main regions. Primary production and its physical and chemical controls are described for each.Enhanced rates of macronutrient supply maintains levels of primary production in the eastern tropical Pacific above those of the oligotrophic subtropical gyres to the north and south. On the other hand lack of the micronutrient iron limits phytoplankton growth (and nitrogen fixation) over large portions of the open-ocean eastern tropical Pacific, depressing rates of primary production and resulting in the so-called high nitrate-low chlorophyll condition. Very high rates of primary production can occur in those coastal areas where both macronutrients and iron are supplied in abundance to surface waters. In these eutrophic coastal areas large phytoplankton cells dominate; conversely, in the open-ocean small cells are dominant. In a ‘shadow zone’ between the subtropical gyres with limited subsurface ventilation, enough production sinks and decays to produce anoxic and denitrified waters which spread beneath very large parts of the eastern tropical Pacific.Seasonal cycles are weak over much of the open-ocean eastern tropical Pacific, although several eutrophic coastal areas do exhibit substantial seasonality. The ENSO fluctuation, however, is an exceedingly important source of interannual variability in this region. El Niño in general results in a depressed thermocline and thus reduced rates of macronutrient supply and primary production. The multi-decadal PDO is likely also an important source of variability, with the ‘El Viejo’ phase of the PDO resulting in warmer and lower nutrient and productivity conditions similar to El Niño.On average the eastern tropical Pacific is moderately productive and, relative to Pacific and global means, its productivity and area are roughly equivalent. For example, it occupies about 18% of the Pacific Ocean by area and accounts for 22–23% of its productivity. Similarly, it occupies about 9% of the global ocean and accounts for 10% of its productivity. While representative, these average values obscure very substantial spatial and temporal variability that characterizes the dynamics of this tropical ocean.     

Preindustrial, historical, and fertilization simulations using a global ocean carbon model with new parameterizations of iron limitation, calcification, and N2 fixation

The Canadian Model of Ocean Carbon (CMOC) has been developed as part of a global coupled climate carbon model. In a stand-alone integration to preindustrial equilibrium, the model ecosystem and global ocean carbon cycle are in general agreement with estimates based on observations. CMOC reproduces global mean estimates and spatial distributions of various indicators of the strength of the biological pump; the spatial distribution of the air-sea exchange of CO₂ is consistent with present-day estimates. Agreement with the observed distribution of alkalinity is good, consistent with recent estimates of the mean rain ratio that are lower than historic estimates, and with calcification occurring primarily in the lower latitudes. With anthropogenic emissions and climate forcing from a 1850-2000 climate model simulation, anthropogenic CO₂ accumulates at a similar rate and with a similar spatial distribution as estimated from observations. A hypothetical scenario for complete elimination of iron limitation generates maximal rates of uptake of atmospheric CO₂ of less than 1 PgC y⁻¹, or about 11% of 2004 industrial emissions. Even a ‘perfect’ future of sustained fertilization would have a minor impact on atmospheric CO₂ growth. In the long term, the onset of fertilization causes the ocean to take up an additional 77 PgC after several thousand years, compared with about 84 PgC thought to have occurred during the transition into the last glacial maximum due to iron fertilization associated with increased dust deposition.