The Effect of Organic Carbon-Iron Oxide Association on the Preservation of Sedimentary Organic Carbon in Marine Environments

Understanding the mechanisms responsible for long-term storage of organic carbon (OC) in marine environment is important for studying the marine carbon cycling and predicting how the global carbon cycle will respond to climate change. It is estimated that more than 20% of the OC in marine sediments is associated with iron oxides and thus these complexes are one of the most important factors in the long-term storage of OC. The OC-iron oxide (OC-Fe) association can be formed through either adsorption or co-precipitation, but the dominant mechanism of OC-Fe association in marine environments is co-precipitation. The combination of OC from different sources with iron oxides is selective. Iron oxides preferentially combine with marine OC in most marine environments, but in estuarine delta regions they prefer terrestrial OC. Due to large inputs of terrestrial materials, high primary production and frequent re-suspension, estuarine and marginal seas are suitable sites for OC-Fe association studies, which should be emphasized in the future.     

Fluxes of iron and manganese across the sediment–water interface under various redox conditions

Fluxes of dissolved forms of iron and manganese across the sediment–water interface were studied in situ in the Gulf of Finland and the Vistula Lagoon (Baltic Sea), and in the Golubaya Bay (Black Sea) from 2001 to 2005. Fluxes were measured using chamber incubations, and sediment cores were collected and sliced to assess the porewater and solid phase metal distribution at different depths. Measured and calculated benthic fluxes of manganese and iron were directed out of sediment for all sites and were found to vary between 70–4450 and 5–1000 µmole m^− 2 day^− 1 for manganese and iron, respectively. The behavior of the studied metals at various redox conditions in the near-bottom water and in the sediment was the main focus in this study. Our results show the importance of bottom water redox conditions for iron fluxes. We measured no fluxes at oxic conditions, intermediate fluxes at anoxic conditions (up to 200 μmole m^− 2 day^− 1) and high fluxes at suboxic conditions (up to 1000 μmole m^− 2 day^− 1). Total dissolved iron fluxes were generally dominated by iron(II). Contribution of iron(III) to the total iron flux did not exceed 20%. Obtained fluxes of manganese at all studied regions showed a linear correlation (r² = 0.97) to its concentration in the porewater of the top sediment layer (0–5 mm) and did not depend on dissolved oxygen concentrations of bottom water. Organically complexed iron and manganese were in most cases not involved in the benthic exchange processes.     

铁(II)-5-Br-PADAP-乳化剂OP体系析相光度法测定微量铁的应用研究

研究了铁 (Ⅱ ) 5 Br PADAP 乳化剂OP体系中的析相、显色反应的条件及其吸收光谱的分析特征 ,拟定了直接测定不同种类样品中痕量铁的分析方法。在pH =5 .0的HAC NaAC缓冲溶液中 ,Fe(Ⅱ ) 5 Br PADAP络合物具有两个吸收峰 ,分别位于λ1 =5 6 1nm与λ2 =75 4nm处。本文选择λ =75 4nm进行测定 ,其摩尔吸光系数为 :ε75 4 =3.9× 10 4L·mol- 1 ·cm- 1 。铁含量在 0～ 2 4μg范围内服从比尔定律。此方法用于样品中痕量铁的测定 ,结果准确     

Relationships between heavy metals and iron oxides,fulvic acids,particle size fractions in urban roadside soils

Urban roadside soils are the “recipients” of large amounts of heavy metals from a variety of sources including vehicle emissions, coal burning waste and other activities. The behavior of heavy metals in urban roadside soils depends on the occurrence as well as the total amount. Accordingly, knowledge of the interactions between heavy metals and other constituents in the soil is required to judge their environmental impact. In this study, correlations of heavy metal concentrations (Pb, Zn, Cu, Ag, Se, Ni, Cr and Ba) to iron extracted using dithionite–citrate–bicarbonate (DCB) buffer (Fe_DCB), fulvic acids and particle size fractions were examined from the Xuzhou urban roadside soils. Heavy metals except for Cr and fulvic acids had a positive significant correlation with Fe_DCB, indicating these metals and fulvic acids are principally associated with the surfaces of iron oxides of the soils. Significant positive correlations were also found between the contents of fulvic acids and heavy metals, showing these heavy metals (especially for Cu, Ni and Cr) form stable complexes with fulvic acids. Such finding is of importance with regard to the increased mobilization of heavy metals, e.g., into freshwater ecosystems. Ag, Se and Cr are independent of particle size fractions because of their low concentrations of Ag and Se in the studied soils. Pb, Zn, Cu, Ba and Ag are mainly enriched in the finer soil particles (especially <16 μm).     

Determination of Ca,K, Mg and Fe in four fish species by FAAS

A method for determining calcium(Ca),potassium(K),magnesium(Mg) and iron(Fe) in four fish species was optimized and validated.It included microwave mineralization of the samples and subsequent quantification by flame atomic absorption spectroscopy(FAAS) with Zeeman-effect background correction.Using HNO3(65%) and H2O2(33%) as extraction solutions,the optimal conditions of extraction were established as follows:0.5 g of sample mass;microwave time program of 300 W/5 min and 600 W/5 min.The method was free of matrix interferences.The linear correlation coefficients were ≥0.9991,the recovery percentage of analytes was from 99.31% to 103.70% and the RSD(relative standard deviation) was lower than 2.06%.The detection limits obtained were 32.3,43.2,14.0 and 68.6 ng mL-1 for Ca,K,Mg and Fe in FAAS respectively.It is shown that the method is rapid,simple,sensitive and accurate.The method was applied to the studies of digestibility and measurement of these nutrients in samples of fish collected from Norway,Japan and China.     

Shear strength characteristics of Irbid clayey soil mixed with iron filling and iron filling–cement mixture

Iron filling and iron filling–cement mixture were used to improve the shear strength characteristics of Irbid clayey soil. For this purpose, five types of Irbid clay soils were obtained and mixed with iron filling and iron filling–cement mixture at different percentages. Two sets of prepared samples were mixed with the admixture. The first set was prepared by mixing the soil samples with iron filling alone at 2.5, 5.0, 7.5, and 10% by dry weight of the soil. The second set was prepared by mixing with iron filling–cement mixture at equal ratio of the same percentages of the first set. An unconfined compression test was performed in this study to measure the shear strength properties of the soils. The test results showed that the increase in the percentages of the iron filling and iron filling–cement mixture up to 10% will result in increasing the maximum dry density of the soil and increase the unconfined compressive strength and the secant of modulus of elasticity of the clayey soil. Also, the addition of iron filling–cement mixture increased the unconfined compressive strength and secant modulus of elasticity of the clayey soil higher than the addition of iron filling alone.     

富铁橄榄石的水溶性实验研究SCIEI北大核心CSCD

地幔的力学性质主要受橄榄石流变性的控制,含水对橄榄石流变性质的影响很大,而橄榄石的水溶性受到温度和铁含量的影响,因此,本文进行了不同铁含量橄榄石在不同温度下的水溶性实验研究。实验使用的样品为天然橄榄石单晶Fa_(17)和Fa_(24.7)(Fe_(No.)=100×molar Fe/(Mg+Fe))以及人工合成的橄榄石单晶Fa_(22);橄榄石单晶的水溶性实验在300MPa围压和1273~1473K的温度条件下进行,每隔50K进行一组实验,氧逸度被控制在Ni NiO水平上。实验结束后,对橄榄石单晶沿b面进行双面研磨抛光,用电子探针分析确定橄榄石单晶成分,采用EBSD精确测量橄榄石的单晶方向,使用红外光谱仪(FTIR)的非偏振光路测试橄榄石单晶在b轴上的吸收光谱。对FTIR吸收光谱进行积分得到富铁橄榄石的水溶性实验结果:当温度由1273K升至1473K时,橄榄石单晶Fa_(17)的水溶性变化为600~1200H/10^(6) Si,橄榄石单晶Fa_(24.7)的水溶性变化为1000~1300H/10^(6) Si,人工合成的橄榄石单晶Fa_(22)的水溶性变化为500~900 H/10^(6) Si。因此,相同铁含量橄榄石单晶的水溶性随温度的增加而增加,相同温度条件下,天然形成的橄榄石的水溶性随着铁含量的增加而增加,百分之一的铁含量的增加,可以导致约百分之十的水溶性的增加。本文所研究的不同铁含量的橄榄石可以为更好地估算上地幔水溶性提供依据。     

小兴安岭翠宏山地区矽卡岩型铁多金属矿成矿特征及区域预测

小兴安岭是黑龙江中部重要的多金属成矿区带,成矿潜力巨大。通过对翠宏山铁多金属典型矿床的研究,建立了区域预测概念模型,总结了该区铁多金属矿的控矿规律,确定了预测要素。在此基础上运用MRAS软件,圈定了3个最小预测区,并对预测区进行了地质评述,认为翠宏山铁多金属矿外围仍是寻找矽卡岩型铁多金属矿较为有利的地区。     

Dissolution rates of metals in Fe oxides: implications for sampling ferruginous materials with significant relict Fe oxides

A study of the pattern of dissolution of synthetic and natural Fe oxides in 6 M HCl indicates that the rate of element release from synthetic Fe oxides is strongly influenced by mineralogy and the level of element incorporation. Synthetic maghemite (γ-Fe₂O₃) samples are subject to much more rapid dissolution than goethite (FeOOH) and hematite (α-Fe₂O₃). In samples dominated by hematite and maghemite, Cu, Zn and particularly Pb, in comparison to Fe, are preferentially released during the early stages of dissolution. Similar patterns are apparent from the dissolution of hematite- and maghemite-dominated samples derived from natural gossan. Comparison of XRD scans with data from the dissolution of natural gossan samples transformed by incremental heating to hematite- and maghemite-dominated assemblages suggests that the degree of crystallinity may also be a significant factor in the release of elements incorporated in the Fe oxides. Ferruginous materials made up of varying proportions of goethite, hematite, maghemite, kaolinite and quartz are important sampling materials in a range of regolith environments. These are products of complex chemical and mechanical mobilization over long periods of geological time. If the patterns of Fe oxide dissolution in 6 M HCl and the release of incorporated metals reflect stability in such weathering regimes, knowledge of the retention characteristics of incorporated metals in different Fe oxide phases, as indicated by this study, will be useful in the planning and interpretation of geochemical surveys in such regions.     

Roaldite in the iron-meteorite São Julião de Moreira

Roaldite – Fe₄N – has been identified in the São Julião de Moreira iron meteorite using electron backscatter diffraction (EBSD) and simultaneously acquired energy-dispersive x-ray spectroscopy (EDS). Mean-periodic-number images derived from raw EBSD patterns confirm this phase by an even higher spatial resolution compared to EDS.Roaldite appears in the form of systematically and repetitively aligned plates. Despite the locally heavy plastic deformation, it is shown that the origin of the oriented precipitation of roaldite is linked to the orientation of the kamacite matrix. Roaldite can be considered to be precipitated from kamacite using an inverse Kurdjumov-Sachs (K-S) or Nishiyama-Wassermann (N-W) orientation relationship. A more accurate discrimination is impossible due to the accumulated shock deformation, which blurs the local reference orientation of kamacite. The habit plane of roaldite is found to be {112}_R, which is most likely parallel to {120}_K of kamacite. Some of the roaldite plates contain two orientation variants which repeatedly alternate. Their misorientation angle is about 12°.